Abstract:Vanadium boasts a relatively small atomic radius among numerous refractory alloying elements, yet its effects on the microstructure and mechanical behavior of refractory alloys remain enigmatic. In this work, a series of NbTiV x Zr high-entropy alloys (HEAs) with low density were formulated to explore the evolution of microstructures and mechanical properties with varying vanadium content. When the vanadium content was low, the matrix exhibited the single-phase body-centered cubic structure. Excessive vanadium contents (NbTiV 0.75 Zr, NbTiVZr) disrupted phase stability and tended to aggregate at grain boundaries, forming V-rich and Zr-rich phases. These precipitated phases pinned grain boundaries, impeding grain growth and resulting in both grain boundary strengthening and precipitation strengthening, albeit at the expense of grain boundary cohesion, ultimately leading to brittleness. However, these deleterious phases were redissolved, and fracture elongation increased more than 2 times after water quenching at 1200 °C. The microstructural changes induced by heat treatment were corroborated by alterations in grain boundary relaxation behavior, where the redissolution of precipitated phases after water quenching caused a shift of the grain boundary relaxation internal friction peak to a lower temperature and an increase in peak height. This study elucidates the intrinsic relationship between mechanical properties and microstructures with vanadium content in NbTiV x Zr alloys, offering insights for the design of TiV-based lightweight refractory HEAs with high strength and excellent ductility.

The Microstructural Evolution and Mechanical Properties of Boron-Doped Ti35Zr30V10Nb25 Refractory High-Entropy Alloy

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Enhancing mechanical properties of the boron doped Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy via tuning composition and microstructure

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Effect of Oxygen on the Microstructure and Mechanical Properties of Ti1.5ZrNbMoV Refractory High-Entropy Alloy

Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering

Microstructure Modification and Ductility Improvement for TaMoNbZrTiAl Refractory High Entropy Alloys via Increasing Ti Content

Microstructural evolution and mechanical behavior of novel Ti1.6ZrNbAl lightweight refractory high-entropy alloys containing BCC/B2 phases

Microstructure and mechanical properties of CrFeNiBx eutectic high entropy alloys

Composition control and heat treatment effect on characteristics of ZrNbTaHf x refractory high entropy alloys

Boron microalloying for high-temperature eutectic high-entropy alloys

Effect of interstitial oxygen /nitrogen on mechanical and wear properties of TiZrHfNb refractory high-entropy alloy

Microstructure and high-temperature oxidation resistance of in-situ Al 2 O 3 reinforced AlCrFeTiV high-entropy alloy with boron microalloying

Study on the Microstructure and Mechanical Properties of Non-Equimolar NiCoFeAlTi High Entropy Alloy Doped with Trace Elements

In-situ development of MB2 and their effect on microstructure and mechanical properties of refractory Hf0.5Mo0.5NbTiZr high entropy alloy matrix composites

First-principles prediction, fabrication and characterization of (Hf0.2Nb0.2Ta0.2Ti0.2Zr0.2)B2 high-entropy borides

Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys

Effect of Ti Additions on Mechanical Properties of NbMoTaW and VNbMoTaW Refractory High Entropy Alloys

Effects of vanadium content on the microstructure and tensile properties of NbTiV x Zr high-entropy alloys

Microstructure evolution and mechanical properties of refractory high-entropy alloy nitride film

Effect of Nb Content on Microstructure and Mechanical Properties of Mo0.25V0.25Ti1.5Zr0.5Nbx High-Entropy Alloys