Abstract:High-entropy alloys (HEAs) manufactured with refractory elements are candidates for high-temperature structural applications. To enhance our understanding of oxidation in these complex systems, the early stages of oxidation on the surface of Al10Nb15Ta5Ti30Zr40 were studied using density functional theory and thermodynamic modeling. Surface slabs were generated from bulk configurations sampled from equilibrium using a multicell Monte Carlo method for phase prediction. The bulk structure was found to be a single BCC phase in good agreement with experimental observations. The oxygen adsorbed with a strong preference for sites with Ti and Zr and avoided sites with Nb-Al and Nb-Ta. The surface was shown to be highly reactive to oxygen, yielding a dominating oxygen coverage of two monolayers over the temperature range of 100 to 2600 K and an oxygen pressure range of 10-30 to 105 bar. Recovering a clean surface slab was not achieved until pressures approached vacuum conditions and temperature exceeded 1900 K, demonstrating the difficulty of oxygen removal from the surface. Grand canonical Monte Carlo simulations showed that high Nb content in the top surface layer reduced the surface reactivity to incoming oxygen. Inward oxygen diffusion at low coverage was preferred in regions rich with Zr but slowed with the addition of Ti and Al. Diffusion rates drastically decreased at 1 ML, especially in the region rich with Ti and Zr, where strong metal-oxygen bonds were reported. Our results indicated that a high content of Ti and Zr increased the reactivity of the HEA surface to oxygen. The presence of Nb also enhanced the resistance to oxygen adsorption, especially when partnered with Al and Ta. Inward oxygen diffusion was likely to occur at low coverage in regions rich with Zr but could be protected against with the addition of Al and Ti. The limitations of the present work are discussed. This study may provide insights that assist with devising short- and long-term mitigation strategies against material degradation related to high-temperature oxidation.

On the Surface Property–Oxidation Relationship in Refractory High‐Entropy Alloys

Oxidation behavior of the Ti38V15Nb23Hf24 refractory high-entropy alloy at elevated temperatures

Oxidation behaviour of Ti-V-Cr-Nb-Ta and Al-Ti-V-Cr-Ta refractory high entropy Alloys: Effects of Nb and Al Substitutions

Oxidation resistance of Al-containing refractory high-entropy alloys

High-Temperature Oxidation Behavior of Refractory High-Entropy Alloys: Effect of Alloy Composition

Oxidation behaviour of a novel refractory high entropy alloy at elevated temperatures

Current Status of Research on the Oxidation Behavior of Refractory High Entropy Alloys

Oxidation influences on the microstructure and mechanical properties of W–Nb–Mo–Ta–V–O refractory high-entropy alloy films

An oxidation resistant refractory high entropy alloy protected by CrTaO4-based oxide

High Temperature Oxidation Behavior of TiNbMoAlSi Refractory High Entropy Alloy Developed by Electron Beam Additive Manufacturing

Adsorption of Oxygen to High Entropy Alloy Surfaces for up to 2 ML Coverage Using Density Functional Theory and Monte Carlo Calculations.

Oxidation Behavior between 700 and 1300 °C of Refractory TiZrNbHfTa High-Entropy Alloys Containing Aluminum

Oxidation Behavior Between 700 And 1300 Degrees C Of Refractory Tizrnbhfta High-Entropy Alloys Containing Aluminum

Dual Coating Layers to Enhance Oxidation Resistance for Refractory High-Entropy Alloys

Improving oxidation resistance of TaMoZrTiAl refractory high entropy alloys via Nb and Si alloying

High-temperature Oxidation Behavior of NbZrTiTa High-entropy Alloy

Development of Oxidation Resistant Refractory High Entropy Alloys for High Temperature Applications: Recent Results and Development Strategy

Mechanical properties and oxidation behavior of NbMoTaW x refractory high entropy alloys

The determining role of Al addition on tribology properties and oxidation behavior at elevated temperatures of TiZrHfNb refractory high-entropy alloy

Oxidation behavior of Ti-Nb-Mo-Al-Six refractory high entropy alloy at 1000°C

Strengthening mechanisms and high-temperature oxidation properties of laser-clad TaNbZrTi refractory high entropy alloy coatings