Abstract:To improve the heat resistance of titanium alloys, the effects of Y content on the precipitation behavior, oxidation resistance and high-temperature mechanical properties of as-cast Ti-5Al-2.75Sn-3Zr-1.5Mo-0.45Si-1W-2Nb-xY (x = 0.1, 0.2, 0.4) alloys were systematically investigated. The microstructures, phase evolution and oxidation scales were characterized by XRD, Laser Raman, XPS, SEM and TEM. The properties were studied by cyclic oxidation as well as room- and high-temperature tensile testing. The results show that the microstructures of the alloys are of the widmanstätten structure with typical basket weave features, and the prior β grain size and α lamellar spacing are refined with the increase of Y content. The precipitates in the alloys mainly include Y2O3 and (TiZr)6Si3 silicide phases. The Y2O3 phase has specific orientation relationships with the α-Ti phase: (002)Y2O3 // (1 ̄1 ̄20)α-Ti, [110]Y2O3 // [4 ̄401]α-Ti. (TiZr)6Si3 has an orientation relationship with the β-Ti phase: (022 ̄1 ̄)(TiZr)6Si3 // (011)β-Ti, [1 ̄21 ̄6](TiZr)6Si3 // [044 ̄]β-Ti. The 0.1 wt.% Y composition alloy has the best high-temperature oxidation resistance at different temperatures. The oxidation behaviors of the alloys follow the linear-parabolic law, and the oxidation products of the alloys are composed of rutile-TiO2, anatase-TiO2, Y2O3 and Al2O3. The room-temperature and 700 °C UTS of the alloys decreases first and then increases with the increase of Y content; the 0.1 wt.% Y composition alloy has the best room-temperature mechanical properties with a UTS of 1012 MPa and elongation of 1.0%. The 700 °C UTS and elongation of the alloy with 0.1 wt.% Y is 694 MPa and 9.8%, showing an optimal comprehensive performance. The UTS and elongation of the alloys at 750 °C increase first and then decrease with the increase of Y content. The optimal UTS and elongation of the alloy is 556 MPa and 10.1% obtained in 0.2 wt.% Y composition alloy. The cleavage and dimples fractures are the primary fracture mode for the room- and high-temperature tensile fracture, respectively.

Effect of Y on the high-temperature oxidation behavior of CrMoTaTi refractory high entropy alloy

Microstructure evolution and performance of TiMoCrW x Ta y refractory high-entropy alloy coatings prepared using laser cladding

An oxidation resistant refractory high entropy alloy protected by CrTaO4-based oxide

Elemental effects on the oxidation of refractory compositionally complex alloys

Mechanical properties and oxidation behavior of NbMoTaW x refractory high entropy alloys

Unraveling the oxidation mechanism of Y-doped AlCoCrFeNi high-entropy alloy at 1100 °C

The determining role of Al addition on tribology properties and oxidation behavior at elevated temperatures of TiZrHfNb refractory high-entropy alloy

Oxidation behaviour of Ti-V-Cr-Nb-Ta and Al-Ti-V-Cr-Ta refractory high entropy Alloys: Effects of Nb and Al Substitutions

Oxidation behaviour of a novel refractory high entropy alloy at elevated temperatures

Effect of Y0.5Gd0.5TaO4 additions on the microstructures, mechanical properties and thermophysical properties of NbMoTaW refractory high-entropy alloy

Strengthening mechanisms and high-temperature oxidation properties of laser-clad TaNbZrTi refractory high entropy alloy coatings

Improving oxidation resistance of TaMoZrTiAl refractory high entropy alloys via Nb and Si alloying

Microstructure Modification and Ductility Improvement for TaMoNbZrTiAl Refractory High Entropy Alloys via Increasing Ti Content

Enhanced Oxidation Resistance of MoTaTiCrAl High Entropy Alloys by Removal of Al

Microstructural Evolution and Mechanical Behavior of Novel TiZrTaxNbMo Refractory High-Entropy Alloys

Effect of Y Content on Precipitation Behavior, Oxidation and Mechanical Properties of As-Cast High-Temperature Titanium Alloys

Ultra-high temperature oxidation resistant refractory high entropy alloys fabricated by laser melting deposition: Al concentration regulation and oxidation mechanism

High-Temperature Oxidation Behaviors of AlCrTiSi0.2 High-Entropy Alloy Doped with Rare Earth La and Y

Uniting superior mechanical properties with oxidation resistance in a refractory high-entropy alloy via Cr and Al alloying

Improvement of High Temperature Oxidation Resistance of Micro Arc Oxidation Coated AlTiNbMo0.5Ta0.5Zr High Entropy Alloy

Microstructure and mechanical property of NbTaTiV refractory high-entropy alloy with different Y2O3 contents