Abstract:Body-centered cubic (BCC) refractory high-entropy alloys (RHEAs) possess the typical advantage of high strength. However, RHEAs often exhibit apparent brittleness at room temperature, which remains great challenges for their engineering applications. In this study, NbMoTaW with 0 and 1 wt% m-ZrO 2 nano-sized ceramic particles RHEAs have been successfully fabricated by ball milling and spark plasma sintering (SPS). The effect of m-ZrO 2 ceramic particles on the microstructures and mechanical properties of NbMoTaW RHEAs was investigated. Results show that the matrix of alloys was characterized by single-phase BCC. Microstructural analysis shows that the grains in the single-phase BCC alloy have been refined by 39.0% through introduction of oxide nano-ceramic particles. The m-ZrO 2 ceramic addition could effectively enhance both the hardness and strength of the NbMoTaW RHEA, accompanied by a slight decrease in plasticity. Compared with the vacuum arc-melting (VAM) method, the sintered NbMoTaW-1ZrO 2 RHEA shows a significant increase in comprehensive compressive properties, especially the ductility. The yield strength, ultimate compressive strength and fracture strain of sintered NbMoTaW-1ZrO 2 RHEA are 1775 MPa, 2118 MPa and 12.4%, respectively, surprisingly increased by 67.8%, 74.9% and 376.9%. A quantitative yield strength model correlating m-ZrO 2 ceramic particle size, volume fraction and NbMoTaW-1ZrO 2 grain size was built. The addition of fine m-ZrO 2 ceramic resulted in Orowan strengthening and fine grains, thereby increasing yield strength of alloy. The superior combination of mechanical properties of the NbMoTaW-1ZrO 2 RHEA could promote it to be a promising alloy in engineering applications.

Microstructure and mechanical property of NbTaTiV refractory high-entropy alloy with different Y2O3 contents

Oxide dispersion strengthening mediated ultra-high strength at wide temperature range in NbTaTiV refractory high-entropy alloys

Effect of Mechanical Alloying and Sintering Behavior on the Microstructure and Properties of NbMoTaWRe Refractory High Entropy Alloy

Microstructure Modification and Ductility Improvement for TaMoNbZrTiAl Refractory High Entropy Alloys via Increasing Ti Content

Microstructures and Mechanical Properties of TixNbMoTaW Refractory High Entropy Alloys

Microstructures and mechanical properties of Ta–Nb–Zr–Ti–Al refractory high entropy alloys with varying Ta/Ti ratios

Mechanical properties and oxidation behavior of NbMoTaW x refractory high entropy alloys

Mechanical properties and strengthening mechanism of the nano-sized m-ZrO 2 ceramic particle reinforced NbMoTaW refractory high-entropy alloy

Effects of Ti content on the tensile ductility, lattice distortion and mechanical properties of VNbTaTi x refractory high-entropy alloys

The Microstructures, Mechanical Properties, and Deformation Mechanism of B2-Hardened NbTiAlZr-Based Refractory High-Entropy Alloys

Effect of Y0.5Gd0.5TaO4 additions on the microstructures, mechanical properties and thermophysical properties of NbMoTaW refractory high-entropy alloy

Microstructure evolution and mechanical properties of NbHfTiVCx novel refractory high entropy alloys with variable carbon content

Effect of Ti and Nb Contents on Microstructure and Mechanical Properties of HfZrVTaMoWTi x Nb y Refractory High‐Entropy Alloys

Microstructure and Mechanical Properties of TaNbVTiAlx Refractory High-Entropy Alloys

Design crystallographic ordering in NbTa 0.5 TiAl x refractory high entropy alloys with strength-plasticity synergy

Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys

Microstructure and strengthening mechanisms of novel lightweight TiAlV0.5CrMo refractory high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

The evolution of compositional and microstructural heterogeneities in a TaMo0.5ZrTi1.5Al0.1Si0.2 high entropy alloy

Effect of alloying elements on the structure and mechanical properties of NbMoTaWX (X = Cr, V, Ti, Zr, and Hf) refractory high-entropy alloys

Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering

Microstructures and mechanical properties of novel MoTaVW refractory high-entropy alloys