Abstract:The mass transfer resistance is a significant element leading to heat transfer degradation of zeotropic mixtures in the flow boiling. In this paper, the heat transfer enhancement of zeotropic mixtures in the flow boiling was investigated through regulating the mass transfer resistance by constructing reasonable surface structure. The heat and mass transfer, pressure drop characteristics of stratified bubble flow for R134a/R245fa zeotropic mixtures in a rectangular channel with multi-cone staggered spoiler porous structure were studied experimentally. The bottom of channel was sintered with multi-cone staggered porous layer with thickness/height/diameter of 1/3/2 mm, respectively. The experiments were carried out under an inlet evaporation temperature of 20 °C, and the ranges for heat and mass fluxes were 10–150 kW/m 2 and 100–150 kg/(m 2 ·s), individually. Compared to the rectangular channel with smooth porous structure, liquid mass transfer resistance of zeotropic mixtures in the rectangular channel with multi-cone staggered porous structure was decreased obviously. The decrease degree for Mixture 2 was largest, while the maximum average decrease was 89.61 % at G = 100 kg/(m 2 ·s). The heat transfer coefficients were obviously improved and heat transfer enhancement increased gradually especially under conditions of high heat flux. The enhancement degree for Mixture 2 was the largest, while the maximum average increase was 26.05 % at G = 100 kg/(m 2 ·s). The pressure drop increased significantly, and the increasing degree for Mixture 2 was smallest, while the minimum average increase was 38.18 % at G = 150 kg/(m 2 ·s). Multi-cone staggered structure was helpful to reduce liquid mass transfer resistance and improve heat transfer performance for zeotropic mixture. The zeotropic mixture with higher liquid mass transfer resistance would have better heat transfer intensify and smaller increase of pressure drop with the help of multi-cone staggered structure.

Separation mechanism of T-junction in thermodynamic systems: A review and case verification

Experimental research on the separation performance of a compound T-junction for two-phase zeotropic mixtures

Design and control of an ideal heat-integrated distillation column (ideal HIDiC) system separating a close-boiling ternary mixture

Isothermal Vapor-Liquid Equilibrium of Binary Mixture (1，1，1，2-Tetrafluoroethane+DME) at Temperature Range From (253.15 to 273.15) K

Experimental and analytical investigation on flow condensation heat transfer of zeotropic mixtures of tetrafluoromethane/ethane

Design and simulation of an efficient gas-liquid separation device for component regulation of zeotropic mixtures

Modeling, Characteristic Analysis, and Optimization of Ideal Internal Thermally Coupled Air Separation Columns

Process design and intensification of multicomponent azeotropes special distillation separation via molecular simulation and system optimization

The evolution of process design and control for ternary azeotropic separation: Recent advances in distillation and future directions

Enhancing Thermal Performance of Thermodynamic Cycle through Zeotropic Mixture Composition Regulation: An Overview

Investigation of the Gas–Liquid Two-Phase Flow and Separation Behaviors at Inclined T-Junction Pipelines

Interfacial properties of binary azeotropic mixtures of simple fluids: Molecular dynamics simulation and density gradient theory.

The conceptual design and process intensification of the separation of ternary azeotropic mixture with heterogeneous characteristic

Numerical investigation of gas separation via thermally induced flows in ratchet-like patterned microchannels

Separation for diethoxymethane/ethanol/water by a thermally coupled extractive pressure swing distillation process with mixed solvent

Towards energy saving and carbon reduction of pressure-swing distillation for separating the ternary azeotropic mixtures by thermodynamic insights and process intensification

Investigating Thermal Mixing and Reverse Flow Characteristics in A T-Junction by Way of Experiments

Heat transfer enhancement for flow boiling of zeotropic mixtures with regulating liquid mass transfer resistance

Experimentally Investigating the Thermal Mixing and Thermal Stripping Characteristics in A T-Junction

Mechanism Analysis and Multiobjective Optimization of Efficient and Energy-Saving Separation of Green Fuel Additives via Extractive Pressure Swing Distillation with an Ionic Liquid Mixed Entrainer

Separation mechanism and influential factor study on vane-type-associated petroleum gas separator