Abstract:Deep cryogenic treatment (DCT) is a one time permanent process, carried out on steel components in such a way that the material is slowly cooled down to the cryogenic temperature, after which it is held at that temperature for a specified period of time and is heated back to room temperature at a slow rate followed by low temperature tempering. The main advantage of DCT is to enhance the wear resistance. The various levels of DCT process parameters have their own influence upon the wear resistance of the material. In this study, the Taguchi method has been used to optimize the process parameters of DCT for a commercial piston ring, made up of 18% Cr martensitic stainless steel (SR34) to obtain maximum wear resistance. The DCT parameters considered for optimization are: the cooling rate, the soaking temperature, the soaking time, the tempering temperature and the tempering time. In this regard, two iterations of Taguchi design have been used to arrive at the optimum DCT parameters. During the first iteration, L16215 orthogonal array (OA) was used to conduct the Taguchi experiment so as to study the significance of these factors and the effect of their possible two-factor interactions. In the second iteration, L934 OA was used to conduct the Taguchi experiment to arrive at the optimal levels. Wear test was conducted on a reciprocatory friction and wear monitor (RFWM) by weight loss method, as per ASTM standards G-181 and G-133. The relative importance of the controlling parameters of DCT and their interactions for enhancing the wear resistance was evaluated in terms of their percentage contributions using analysis of variance (ANOVA). The optimum levels of the significant DCT parameters for SR34 steel ring were arrived based on the maximum S/N ratio. A confirmation test was conducted subsequently, and the results were found to be within the confidence interval.

Process parameter analysis of deep cryogenic treated EN 52 Silicon chromium valve steel through Taguchi technique

Microstructure, Mechanical and Wear Behaviour of Deep Cryogenically Treated EN 52 Silchrome Valve Steel

Optimization of Deep Cryogenic Treatment Process for 100Cr6 Bearing Steel Using the Grey-Taguchi Method

Impact of Cryogenic Treatment Process on the Performance of 51CrV4 Steel

Effect of Cryogenic Treatment on the Mechanical Properties of Alloy Steel 16MnCr5

Evaluation of factors influencing deep cryogenic treatment that affect the properties of tool steels

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100 Cr6 Bearing Steel

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100Cr6 Bearing Steel

Optimization of cryogenic treatment to maximize the wear resistance of 18% Cr martensitic stainless steel by Taguchi method

Deep Cryogenic Treatment Improves Wear Resistance of En 31 Steel

Effect of cryogenic treatment on tensile behavior of case carburized steel-815M17

Cryogenic Treatment of Tool Materials: A Review

Effects of deep cryogenic treatment on machinability, hardness and microstructure in dry turning process of tempered steels

Influence of Deep Cryogenic Treatment on the Mechanical Properties of AISI 440C Bearing Steel

Influence of shallow and deep cryogenic treatment on the residual state of stress of 4140 steel

Precipitation of Fine Carbides, Transformation of the Retained Austenite and Corrosion Properties on EN-31 Steel by Cryogenic Treatment Process

Deep cryogenic treatment of En 31 and En 8 steel for the development of wear resistance

Effect of Process Variables of Cryogenic Treatment on Mechanical Properties and Microstructure of W6Mo5Cr4V2 Steel

Effect of Cryosoaking Period and Soft-Tempering Temperature on Wear Behavior of AISI H13 Steel

Effect of deep cryogenic treatment on the mechanical properties of tool steels

Processing, Microstructural Characterization, and Mechanical Properties of Deep Cryogenically Treated Steels and Alloys – Overview