Abstract:Deep cryogenic treatment (DCT) is a one time permanent process, carried out on steel components in such a way that the material is slowly cooled down to the cryogenic temperature, after which it is held at that temperature for a specified period of time and is heated back to room temperature at a slow rate followed by low temperature tempering. The main advantage of DCT is to enhance the wear resistance. The various levels of DCT process parameters have their own influence upon the wear resistance of the material. In this study, the Taguchi method has been used to optimize the process parameters of DCT for a commercial piston ring, made up of 18% Cr martensitic stainless steel (SR34) to obtain maximum wear resistance. The DCT parameters considered for optimization are: the cooling rate, the soaking temperature, the soaking time, the tempering temperature and the tempering time. In this regard, two iterations of Taguchi design have been used to arrive at the optimum DCT parameters. During the first iteration, L16215 orthogonal array (OA) was used to conduct the Taguchi experiment so as to study the significance of these factors and the effect of their possible two-factor interactions. In the second iteration, L934 OA was used to conduct the Taguchi experiment to arrive at the optimal levels. Wear test was conducted on a reciprocatory friction and wear monitor (RFWM) by weight loss method, as per ASTM standards G-181 and G-133. The relative importance of the controlling parameters of DCT and their interactions for enhancing the wear resistance was evaluated in terms of their percentage contributions using analysis of variance (ANOVA). The optimum levels of the significant DCT parameters for SR34 steel ring were arrived based on the maximum S/N ratio. A confirmation test was conducted subsequently, and the results were found to be within the confidence interval.

Optimization of Deep Cryogenic Treatment Process for 100Cr6 Bearing Steel Using the Grey-Taguchi Method

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100 Cr6 Bearing Steel

Enhancing the Wear Resistance of 100Cr6 Bearing Steel Using Cryogenic Treatment

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100Cr6 Bearing Steel

Optimization of cryogenic treatment to maximize the wear resistance of 18% Cr martensitic stainless steel by Taguchi method

Influence of cryogenic treatment on the wear characteristics of 100Cr6 bearing steel

Influence of Deep Cryogenic Treatment on the Mechanical Properties of AISI 440C Bearing Steel

Study on Deep Cryogenic Treated-Tempered WC-CO insert in turning of AISI 1040 steel

Effects of deep cryogenic treatment on machinability, hardness and microstructure in dry turning process of tempered steels

Optimization of deep cryogenic treatment conditions for the wear rate of UNS R56400 (Ti6Al4V) medical titanium alloy using Taguchi’s method

Evaluation of factors influencing deep cryogenic treatment that affect the properties of tool steels

Effect of multiple deep cryo-treating and tempering on microstructure and property evolution of high carbon bearing steel

Effect of Deep Cryogenic Treatment on Wear Resistance of AISI 52100 Bearing Steel

Deep Cryogenic Treatment Improves Wear Resistance of En 31 Steel

Effect of Deep Cryogenic Treatment on the Carbide Precipitation and Tribological Behavior of D2 Steel

Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel

Influence of Deep Cryogenic Treatment and Secondary Tempering on Microstructure and Mechanical Properties of Medium-Carbon Low-Alloy Steels

Impact of Cryogenic Treatment Process on the Performance of 51CrV4 Steel