Abstract:This study examined the hard turning of AISI D2 cold work tool steel subjected to deep cryogenic processing and tempering and investigated the effects on surface roughness and tool wear. In addition, the effects of the deep cryogenic processes on mechanical properties (macro and micro hardness) and microstructure were investigated. Three groups of test samples were evaluated: conventional heat treatment (CHT), deep cryogenic treatment (DCT-36) and deep cryogenic treatment with tempering (DCTT-36). The samples in the first group were subjected to only CHT to 62 HRc hardness. The second group (DCT-36) underwent processing for 36 h at −145 °C after conventional heat treatment. The latter group (DCTT-36) had been subjected to both conventional heat treatment and deep cryogenic treatment followed by 2 h of tempering at 200 °C. In the experiments, Al2O3 + TiC matrix-based untreated mixed alumina ceramic (AB30) and Al2O3 + TiC matrix-based TiN-coated ceramic (AB2010) cutting tools were used. The artificial intelligence method known as artificial neural networks (ANNs) was used to estimate the surface roughness based on cutting speed, cutting tool, workpiece, depth of cut and feed rate. For the artificial neural network modeling, the standard back-propagation algorithm was found to be the optimum choice for training the model. Three different cutting speeds (50, 100 and 150 m/min), three different feed rates (0.08, 0.16 and 0.24 mm/rev) and three different cutting depths (0.25, 0.50 and 0.75 mm) were selected. Tool wear experiments were carried out at a cutting speed of 150 m/min, a feed rate of 0.08 mm/rev and a cutting depth of 0.6 mm. As a result of the experiments, the best results for both surface roughness and tool wear were obtained with the DCTT-36 sample. When cutting tools were compared, the best results for surface roughness and tool wear were obtained with the coated ceramic tool (AB2010). The macroscopic and micro hardness values were highest for the DCT-36. From the microstructural point of view, the DCTT-36 sample showed the best results with homogeneous and thinner secondary carbide formations.

Effect of Deep Cryogenic Treatment on the Carbide Precipitation and Tribological Behavior of D2 Steel

Effect of deep cryogenic processing cycles on surface roughness, dimensional stability and microstructure of high carbon high chromium tool steel for cutting tool and dies applications

Effect of multiple deep cryo-treating and tempering on microstructure and property evolution of high carbon bearing steel

Effect of Deep Cryogenic Treatment on Wear Behavior of Cold Work Tool Steel

Processing, Microstructural Characterization, and Mechanical Properties of Deep Cryogenically Treated Steels and Alloys – Overview

Effect of Deep Cryogenic Treatment on Dilatometric Curve and Tribological Properties of High Speed Steel

Influence of Deep Cryogenic Treatment on the Mechanical Properties of AISI 440C Bearing Steel

Enhancing the Wear Resistance of 100Cr6 Bearing Steel Using Cryogenic Treatment

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100Cr6 Bearing Steel

Effects of deep cryogenic treatment on the microstructure evolution, mechanical and thermal fatigue properties of H13 hot work die steel

Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100 Cr6 Bearing Steel

Carbides precipitation and kinetics of H13 steel subjected to deep cryogenic treatment

Evaluation of factors influencing deep cryogenic treatment that affect the properties of tool steels

Effect of machinability, microstructure and hardness of deep cryogenic treatment in hard turning of AISI D2 steel with ceramic cutting

Effects of Deep Cryogenic Treatment on the Wear Resistance and Mechanical Properties of AISI H13 Hot-Work Tool Steel

Nitriding of Steel AISI D2 After Deep Cryogenic Treatment

Influence of cryogenic treatment on the wear characteristics of 100Cr6 bearing steel

Influence of Deep Cryogenic Treatment on Microstructures and Mechanical Properties of an Ultrafine-Grained WC-12Co Cemented Carbide

Effect of Deep Cryogenic Treatment on Wear Resistance of AISI 52100 Bearing Steel