Abstract:Hot work steels used as dies in metal forming processes must endure harsh conditions, typically achieved through a martensitic structure. However, retained austenite can persist after martensitic transformation, negatively impacting mechanical properties. Cryogenic treatment (CT) refines martensite, reduces retained austenite, and increases fine carbide density, thus enhancing performance. DIN 1.2888, a hot work tool steel with high cobalt content (~10%) and low carbon content (~0.2%), is less studied concerning the effects of CT. The objective of this study was to investigate how cryogenic treatment affects the mechanical and microstructural properties of DIN 1.2888 steel. Samples underwent conventional heat treatment (HT) and CT at -100, -140, and -180°C for 6 hours, followed by double tempering. Various analytical methods, including X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), and Vickers Microhardness tests, were used to examine the samples. Wear mechanisms were evaluated through pin-on-disc tests under different loads, and impact toughness was measured both at room temperature and the working temperature of dies (350°C). Results indicated that lowering the cryogenic treatment temperature resulted in a slight increase in hardness values from 507HV for the heat-treated sample to 529HV for the sample treated at -180°C. Additionally, the impact toughness improved significantly, with values rising from 12.35J for the heat-treated sample to 23.44J at 350°C for the cryogenically treated sample at -180°C. Wear rates also decreased by approximately 50%, particularly at higher cryogenic treatment temperatures. The improvement in wear resistance was attributed to finer carbide precipitation and a more homogeneous distribution of carbides. These findings suggest that deep cryogenic treatment has a positive effect on DIN 1.2888 steel by decreasing retained austenite and increasing fine carbide density, leading to enhanced mechanical properties and extending the lifespan of the steel in die applications.

Effect of Cryogenic Treatment on the Mechanical Properties of Alloy Steel 16MnCr5

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100 Cr6 Bearing Steel

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100Cr6 Bearing Steel

Effect of cryogenic treatment on tensile behavior of case carburized steel-815M17

Enhancing the Wear Resistance of 100Cr6 Bearing Steel Using Cryogenic Treatment

Influence of cryogenic treatment on the wear characteristics of 100Cr6 bearing steel

Impact of Cryogenic Treatment Process on the Performance of 51CrV4 Steel

Microstructure and mechanical properties in core of a carburizing 20CrNi2MoV bearing steel subjected to cryogenic treatment

Effect of deep cryogenic treatment on the mechanical properties of tool steels

Effects of deep cryogenic treatment on static mechanical properties of 18NiCrMo5 carburized steel

Cryogenic treatment to augment wear resistance of tool and die steels

Deep Cryogenic Treatment Improves Wear Resistance of En 31 Steel

Effect of cryogenic treatment on the mechanical properties of 4340 steel

Effect of Deep Cryogenic Time on the Microstructure and Mechanical Property of Cr-Mn-Si High-Strength Alloy Steel

Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel

Influence of Cryogenic Treatment on the Corrosion Properties of 42CrMo Low Alloy Steel

The Effect of Cryogenic Treatment on a High Co Bearing DIN 1.2888 Steel Used as Die in Hot Forging Process

Effect of deep cryogenic treatment on microstructures and mechanical properties of automotive 6063Al alloy

Effect of cryogenic treatment holding time on mechanical and microstructural properties of Sverker 21 steel

Cryogenic Treatment of Tool Materials: A Review