Abstract:In this study, the multi-stage heat treatment involving quenching (Q), lamellarizing (L), cryogenic (C) and tempering (T) is applied in marine 10Ni5CrMoV steel to study the microstructure and mechanical properties by multi-scale characterizations. Strengthening mechanism, strain hardening behavior and cryogenic toughening mechanism are further investigated. The results indicate that cryogenic treatment induces lattice distortion in martensite, resulting in significant internal stress. This process leads to the shrinkage of the laths, thereby reducing the equivalent grain size of the specimen. The combined cryogenic and tempering process induces continuous martensitic transformation, resulting in a reduction of the austenite volume fraction and dislocation density. The strong internal stress accelerates the movement of defects (dislocations) to grain boundaries. It promotes the precipitation of numerous alloy elements in the form of carbides at these defects, causing a significant decrease in solution strengthening. This is the primary reason why the yield strength of the QLCT specimen is reduced from 889.5 ± 7.8 MPa to 838.5 ± 7.4 MPa compared to the QLT specimen. The QLCT specimen exhibits a single stage strain hardening behavior during plastic deformation and possesses strong strain hardening ability and good machinability. This is attributed to the interaction between fine precipitates and dislocations. During the cryogenic impact process, secondary lattice distortion occurs in the QLCT specimen, further refining the precipitates. This enhances the pinning effect on grain boundaries and dislocations, improving the ability to hinder crack propagation. Consequently, the impact energy of the QLCT specimen increases from 264.3 ± 6.4 J to 278.7 ± 6.3 J at -84 °C, compared to the QLT specimen. Graphical

Effect of Process Variables of Cryogenic Treatment on Mechanical Properties and Microstructure of W6Mo5Cr4V2 Steel

Effect of Cryogenic Treatment on the Mechanical Properties of Alloy Steel 16MnCr5

Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel

Effect of Deep Cryogenic Time on Martensite Multi-Level Microstructures and Mechanical Properties in AISI M35 High-Speed Steel

Effect of multiple deep cryo-treating and tempering on microstructure and property evolution of high carbon bearing steel

Impact of Cryogenic Treatment Process on the Performance of 51CrV4 Steel

Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr–Mo–V–Ni steel

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100 Cr6 Bearing Steel

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100Cr6 Bearing Steel

Microstructural Evolution and Mechanical Properties of 6cr13 Martensitic Stainless Steel Subjected to Cold Rolling and Heat Treatments

Effect of Deep Cryogenic Time on the Microstructure and Mechanical Property of Cr-Mn-Si High-Strength Alloy Steel

Effect of Cryogenic Treatments on Hardness, Fracture Toughness, and Wear Properties of Vanadis 6 Tool Steel

Effects of cryogenic treatment on mechanical properties and crystal orientation of 0.25C-0.80Si-1.6Mn steel with extraordinary strength-toughness

Enhancing Ductility of Martensitic Steels Through Cryogenic Treatment

Study of Cryogenic Treatment on the Microstructure and Mechanical Properties of Marine 10Ni5CrMoV Steel

Effect of deep cryogenic treatment on the mechanical properties of tool steels

Effect mechanism of cryogenic treatment on ferroalloy and nonferrous alloy and their weldments: A review

Effect of Pulsed Magnetic Field on Retained Austenite of Quenched 8cr4mo4v Steel under Cryogenic Condition

Effects of deep cryogenic treatment on microstructural evolution and alloy phases precipitation of a new low carbon martensitic stainless bearing steel during aging

Effect of deep cryogenic treatment on martensitic lath refinement and nano-twins formation of low carbon bearing steel

Microstructure and mechanical properties in core of a carburizing 20CrNi2MoV bearing steel subjected to cryogenic treatment