Abstract:Hot work steels used as dies in metal forming processes must endure harsh conditions, typically achieved through a martensitic structure. However, retained austenite can persist after martensitic transformation, negatively impacting mechanical properties. Cryogenic treatment (CT) refines martensite, reduces retained austenite, and increases fine carbide density, thus enhancing performance. DIN 1.2888, a hot work tool steel with high cobalt content (~10%) and low carbon content (~0.2%), is less studied concerning the effects of CT. The objective of this study was to investigate how cryogenic treatment affects the mechanical and microstructural properties of DIN 1.2888 steel. Samples underwent conventional heat treatment (HT) and CT at -100, -140, and -180°C for 6 hours, followed by double tempering. Various analytical methods, including X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), and Vickers Microhardness tests, were used to examine the samples. Wear mechanisms were evaluated through pin-on-disc tests under different loads, and impact toughness was measured both at room temperature and the working temperature of dies (350°C). Results indicated that lowering the cryogenic treatment temperature resulted in a slight increase in hardness values from 507HV for the heat-treated sample to 529HV for the sample treated at -180°C. Additionally, the impact toughness improved significantly, with values rising from 12.35J for the heat-treated sample to 23.44J at 350°C for the cryogenically treated sample at -180°C. Wear rates also decreased by approximately 50%, particularly at higher cryogenic treatment temperatures. The improvement in wear resistance was attributed to finer carbide precipitation and a more homogeneous distribution of carbides. These findings suggest that deep cryogenic treatment has a positive effect on DIN 1.2888 steel by decreasing retained austenite and increasing fine carbide density, leading to enhanced mechanical properties and extending the lifespan of the steel in die applications.

Effect of Cryosoaking Period and Soft-Tempering Temperature on Wear Behavior of AISI H13 Steel

Effects of Deep Cryogenic Treatment on the Wear Resistance and Mechanical Properties of AISI H13 Hot-Work Tool Steel

Effect of Deep Cryogenic Treatment on Corrosion Behavior of AISI H13 Die Steel

The effect of deep cryogenic treatments on the mechanical properties of an AISI H13 steel

Effect of deep cryogenic treatment on the mechanical properties of tool steels

Study of Wear Stabilisation in Cryoprocessed Cobalt-Based High Speed Steel

Effect of Deep Cryogenic Treatment on Wear Behavior of Cold Work Tool Steel

Effects of deep cryogenic treatment on the microstructure evolution, mechanical and thermal fatigue properties of H13 hot work die steel

Effect of tempering temperature and subzero treatment on microstructures, retained austenite, and hardness of AISI D2 tool steel

Effect of Deep Cryogenic Treatment on Microstructure and Properties of M35 High Speed Steel

Effect of multiple deep cryo-treating and tempering on microstructure and property evolution of high carbon bearing steel

Carbides precipitation and kinetics of H13 steel subjected to deep cryogenic treatment

The Effect of Deep Cryogenic Treatment on Microstructure and Wear Behavior of H11 Tool Steel

Evaluation of factors influencing deep cryogenic treatment that affect the properties of tool steels

Microstructural variations and mechanical properties of deep cryogenic treated AISI M35 high-speed steel tempered at various temperatures

Effect of Deep Cryogenic Time on Martensite Multi-Level Microstructures and Mechanical Properties in AISI M35 High-Speed Steel

Effects of Cryogenic and Stress Relief Treatments on Temper Carbide Precipitation in AISI D2 Tool Steel

The Effect of Cryogenic Treatment on a High Co Bearing DIN 1.2888 Steel Used as Die in Hot Forging Process

Influence of cryogenic treatment on the wear characteristics of 100Cr6 bearing steel

Tempering behavior and mechanical properties of tempered AISI H13 steel