Abstract:Research interest in thin-film transistor (TFT)-based flexible electronics for next-generation foldable and rollable displays is increasing, centering on flexible plastic substrates such as polyethylene terephthalate (PET), polyethylene naphthalate (PEN), and polyimide (PI). For flexible electronics using plastic substrates, it is important to select suitable semiconductor materials that can be deposited at low substrate temperature. Metal oxide (MO) semiconductors such as indium-gallium-zinc oxide (IGZO), zinc oxide (ZnO) are attracting attention as suitable candidates for plastic substrate electronics because of their higher mobility and optical transmittance than hydrogenated amorphous silicon (a-Si:H). In addition, since it can be processed at a lower temperature than low-temperature polysilicon (LTPS), it can be easily applied to flexible plastic substrates. One of the greatest advantages of MO is that it can be easily fabricated by conventional semiconductor processing methods such as sputtering, atomic laser deposition, and solution processes. Among them, solution-processed deposition method is particularly advantageous in terms of manufacturing efficiency because it does not require a separate vacuum system, and can efficiently utilize raw materials, so the fabrication cost is inexpensive. In particular, spray pyrolysis can guarantee environmental stability, high mobility, and large area production than other solution processes. In this work, we developed the high-performance, flexible a-IGZO/Al 2 O 3 TFTs using spray pyrolysis fabricated on the flexible PI substrate. In a previous study, we developed a method to reduce curling and electrostatic discharge (ESD) damage to PI substrates by using a mixture of carbon nanotubes (CNTs) and graphene oxide (GO) between carrier glass and PI substrate. Therefore, it was possible to mechanically detach the TFTs on PI substrate and handle them easily even after detachment. The spray-pyrolyzed Al 2 O 3 film is one of the high-k dielectric materials, which can lower the operating voltage, so the low-power consumption of the TFT backplane can be realized. The flexible spray-pyrolyzed a-IGZO/Al 2 O 3 TFT exhibits the field-effect mobility (μ FE ) of 9.75 cm 2 V −1 s −1 , threshold voltage (V TH ) of −0.8 V, subthreshold swing (SS) of 0.29 V dec −1 , and on/off current ratio of 6.2 × 10 7 . Even without TFT passivation layer, it shows environmental stability. The TFTs show robust electrical performance even under tensile strain with a bending radius of 1 mm. In addition, it showed stable electrical characteristics even in the repeated bending test of 30,000 cycles under compressive strain with a bending radius of 1 mm. This is due to fewer defects resulting from the smooth interface of the a-IGZO film and the Al 2 O 3 film deposited through spray pyrolysis. Therefore, spray-pyrolyzed a-IGZO/Al 2 O 3 TFT fabricated on PI substrate is a promising candidate for next-generation foldable display application. Figure 1

Single-crystalline silicon nanomembrane thin-film transistors with anodized aluminum oxide as a gate dielectric on rigid and flexible substrates

Flexible Hybrid Single-Crystalline Silicon Nanomembrane Thin-Film Transistor with Organic Polymeric Polystyrene as a Gate Dielectric on a Plastic Substrate

High-Performance Polycrystalline Sige Thin-Film Transistors Using Al2o3 Gate Insulators

High-Performance Flexible Single-Crystalline Silicon Nanomembrane Thin-Film Transistors with High-k Nb2O5-Bi2O3-MgO Ceramics As Gate Dielectric on a Plastic Substrate

High‐performance Nd: AIZO/Al2O3 dual active layer design without thermal annealing: high‐speed electron transport and defect modification in thin film transistors

Al2O3/HfO2 Nanolaminate Dielectric Boosting IGZO-Based Flexible Thin-Film Transistors

High-performance thin-film transistors using semiconductor nanowires and nanoribbons

Implementing Room‐Temperature Fabrication of Flexible Amorphous Sn–Si–O TFTs via Defect Control

Flexible Amorphous Indium-Gallium-Zinc Oxide Thin-Film Transistor with Aluminum Oxide Gate Insulator on Polyimide Substrate By Spray Pyrolysis for Foldable Display

Low-temperature solution-processed flexible metal oxide thin-film transistors via laser annealing

Room-Temperature Fabrication of High-Performance Amorphous In-Ga-Zn-O/Al2O3 Thin-Film Transistors on Ultrasmooth and Clear Nanopaper.

Self-Assembled Ultralow-Voltage Flexible Transparent Thin-Film Transistors Gated By Sio2-Based Solid Electrolyte

Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors

High‐Performance Transparent Silicon Nanowire Thin Film Transistors Integrated on Glass Substrates via a Room Temperature Solution Passivation

Self-Assembled Ultralow-Voltage Flexible Transparent Thin-Film Transistors Gated by $\Hbox{sio}_{2}$-Based Solid Electrolyte

Amorphous IZO-based transparent thin film transistors

Bilayer Metal Oxide Channel Thin Film Transistor With Flat Interface Based on Smooth Transparent Nanopaper Substrate

26.3: Development of Nanoporous Anodic Aluminum Oxide (np‐aao) Thin Template on PET/Ti Flexible Substrate for Flexible Liquid Crystal Display (flexible‐lcd) Application

High‐Performance Flexible Silicon Nanowire Field Effect Transistors on Plastic Substrates

36.3: Flexible ZnO Thin‐Film Transistors Fabricated on PEN Substrate by Atomic Layer Deposition at Low Temperature

High-Performance Flexible Tin-Zinc-Oxide Thin-Film Transistors Fabricated on Plastic Substrates