Abstract:GHz pulsed thulium-doped fiber laser with stabilized repetition rate can enable a wide range of applications. By employing regenerative mode-locking and cavity stabilization technique, we have for the first time demonstrated a 10 GHz polarization-maintaining thulium-doped fiber laser, which has a long-term repetition-rate stabilization and picosecond timing-jitter. In our experiment, a RF circuitry is designed to extract the 10 GHz longitudinal clock signal so that stable regenerative mode-locking is achieved. A piezo actuator-based phase-lock-loop is used to lock the regeneratively mode-locked pulses to a local reference synthesizer. The regeneratively mode-locked pulses with picosecond pulse width exhibit a high super-mode suppression ratio of 60 dB. In addition, the repetition rate of the laser shows good long-term stability with a variation of 8 Hz in 8 hours, corresponding to a cavity free spectral range fluctuation of less than 16 mHz. Meanwhile, the Allan deviation of the stabilized 10 GHz regeneratively mode-locked pulses is measured to be as low as 2 x 10(-12) over 1000 s average time, which is only limited by the stability of the reference synthesizer. Such an ultra-stable 10 GHz pulsed thulium fiber laser may find potential application in 2 mu m optical communication, material processing and spectroscopy. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

All-Polarization-Maintaining, Ultra-Compact Tm-Doped Fiber Laser Designed for Mid-Infrared Comb

Sub-200 Fs, 344 MHz Mode-Locked Tm-doped Fiber Laser

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

950 Nm Femtosecond Laser by Directly Frequency-Doubling of a Thulium-Doped Fiber Laser

All-polarization-maintaining Mode-Locked Thulium-Doped Femtosecond Laser at 1.7 Μm

Compact femtosecond fiber laser with integrated optical components

Robust 1.7-Mu M, All-Polarization-Maintaining Femtosecond Fiber Laser Source Based On Standard Telecom Fibers

Bursts with shape-alterable pulses in a compact Tm-doped fiber laser with simultaneous active intracavity phase and intensity modulations

10 GHz Regeneratively Mode-Locked Thulium Fiber Laser with a Stabilized Repetition Rate

Compact, repetition rate locked all-PM fiber femtosecond laser system based on low noise figure-9 Er:fiber laser

Mode-locked Femtosecond All Polarization-Maintaining Erbium-Doped Dispersion Managed Fiber Laser Based on a Nonlinear Amplifying Loop Mirror

Tm-Doped Nonlinear Fiber Amplifier Emitting 50 fs Pulses and 20 W of Average Power at 2 μm Wavelength

1.7 Μm Figure-9 Tm-doped Ultrafast Fiber Laser.

All-Fiber Polarization-Maintaining Dispersion-Managed Figure-of-9 Mode-Locked Laser

All-polarization-maintaining, semiconductor saturable absorbing mirror mode-locked femtosecond Er-doped fiber laser with a gigahertz fundamental repetition rate

Compact, All-PM Fiber Integrated and Alignment-Free Ultrafast Yb:Fiber NALM Laser With Sub-Femtosecond Timing Jitter

A Single-Frequency Linearly Polarized Fiber Laser Using a Newly Developed Heavily Tm 3+ -Doped Germanate Glass Fiber at 1.95 Μm

All-fiber Polarization-Maintaining Erbium-Doped Dispersion-Managed Fiber Laser Based on a Nonlinear Amplifying Loop Mirror.

All Polarization-Maintaining Erbium-Doped Fiber Based Optical Comb

A Compact 51.6-W, 26-Μj, Yb-doped All-Fiber Integrated CPA System Through Quasi-Rectangular Pulse Pre-Shaping

1 Mj, 10 Kw, Nanosecond All-Fiber Thulium-Doped Fiber Laser at 2050 Nm