Compact All-Fiber Mode-Locked Laser At 1.8 Mu M

X. Wen,Y. Sun,T. Qiao,W. Lin,X. Wei,Z. Yang

2020-01-01

Abstract:We demonstrate a compact all-fiber mode-locked ultrashort pulse laser at 1.8 mu m. This cost-effective pulsed laser is expected to be promising for deep-brain multiphoton imaging at the third near infrared optical tissue window. (C) 2020 The Author(s)

What problem does this paper attempt to address?

Compact All-Fiber Mode-Locked Laser at 1.8 μm for Three-Photon Imaging

X. Wen,Y. Sun,T. Qiao,W. Lin,Xiaoming Wei,Zhi Yang

DOI: https://doi.org/10.1364/cleo_at.2020.jtu2f.5

2020-01-01

Abstract:We demonstrate a compact all-fiber mode-locked ultrashort pulse laser at 1.8 μm. This cost-effective pulsed laser is expected to be promising for deep-brain multiphoton imaging at the third near infrared optical tissue window.
Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Lizhen Wang,Peizhen Xu,Yuhang Li,Jize Han,Xin Guo,Yudong Cui,Xueming Liu,Limin Tong

DOI: https://doi.org/10.1038/s41598-018-23027-9

IF: 4.6

2018-01-01

Scientific Reports

Abstract:Mode-locked Yb-doped fiber lasers around 1 μm are attractive for high power applications and low noise pulse train generation. Mode-locked fiber lasers working in soliton and stretched-pulse regime outperform others in terms of the laser noise characteristics, mechanical stability and easy maintenance. However, conventional optical fibers always show a normal group velocity dispersion around 1 μm, leading to the inconvenience for necessary dispersion management. Here we show that optical microfibers having a large anomalous dispersion around 1 μm can be integrated into mode-locked Yb-doped fiber lasers with ultralow insertion loss down to −0.06 dB, enabling convenient dispersion management of the laser cavity. Besides, optical microfibers could also be adopted to spectrally broaden and to dechirp the ultrashort pulses outside the laser cavity, giving rise to a pulse duration of about 110 fs. We believe that this demonstration may facilitate all-fiber format high-performance ultrashort pulse generation at 1 μm and may find applications in precision measurements, large-scale facility synchronization and evanescent-field-based optical sensing.
66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

minglie hu,lu chai,weidong shen,xu liu,chingyue wang,han chi,bowen liu,youjian song

DOI: https://doi.org/10.1364/fbta.2014.fth4f.3

2014-01-01

Abstract:We present a mode-locked all-normal-dispersion double-clad Yb-doped fiber laser with 3 W output average power at 81 MHz repetition rate for 37 nJ chirped pulses, which can be compressed to 66 fs, with 400 KW peak power.
All-Polarization-Maintaining, Ultra-Compact Tm-Doped Fiber Laser Designed for Mid-Infrared Comb

Jiaqi Zhou,Weiao Qi,Xin Zeng,Xin Cheng,Huawei Jiang,Shuzhen Cui,Yan Feng

DOI: https://doi.org/10.1109/lpt.2021.3138858

IF: 2.6

2022-01-15

IEEE Photonics Technology Letters

Abstract:Developing compact and stable 2 $\mu \text{m}$ ultrafast laser sources is important for generating mid-inferred frequency combs. Here, we report on a simple, compact and reliable thulium-doped fiber laser based on figure-of-9 mode-locking. Self-starting and stable mode-locked operation is achieved with 0.30 nJ pulse energy and 128 fs pulse width under 121.3 MHz repetition rate. The generated pulses centered at 1990 nm have a 3 dB bandwidth of 39.4 nm. The laser has been assembled into a $197\times 78\times 20$ mm3 fiber box under temperature-control. The repetition rate was phase locked over 20 h with a fluctuation standard deviation of 192.5 $\mu $ Hz. Such compact and highly-reliable mid-inferred laser could be used beyond laboratory and promote numerous critical applications including dual-comb spectroscopy, ranging and frequency calibration.

engineering, electrical & electronic,optics,physics, applied
Ultra-short Pulse Burst Laser Around 1.98 Μm Obtained Through an All-Fiber Nonlinear Wavelength Converter and Tm-doped Fiber Amplifier.

Yongchang Zhang,Liyao Chen,Xilun Gao,Peipei Jiang,Bo Wu,Yonghang Shen

DOI: https://doi.org/10.1364/ol.484017

2023-01-01

Abstract:We report an all-fiber ultra-short pulse burst laser operating at around 1.98 µm that is obtained through a nonlinear wavelength converter and Tm-doped fiber amplifier. A mode-locked Er-doped fiber laser was first built and then amplified in subsequent amplifiers to an average power of 1.3 W. Ultra-short pulse burst output was achieved through a pulse multiplier and a fiber-pigtailed acousto-optic modulator. It was then injected into an all-fiber nonlinear wavelength converter constructed from P-doped fiber and Tm-doped fiber, obtaining an ultra-short pulse burst laser of 540 mW around 1.98 µm. Its average output power was then amplified to 4.33 W in a Tm-doped fiber amplifier with an intra-burst pulse repetition frequency of 0.9 GHz, a burst repetition frequency of 200 kHz, and a duty cycle of 2%, corresponding to about 200 pulses within each burst. This 1.98 µm pulse burst laser has enormous potential to be applied in bio-medical areas.
1.7 μm all-fiber figure-9 mode-locked laser based on a fiber Bragg grating

Yang Liu,Peng Zhang,Yunlong Fan,Yuzhu Ning,Shuang He,Shoufeng Tong

DOI: https://doi.org/10.1088/1555-6611/ace3bb

IF: 1.2

2023-07-26

Laser Physics

Abstract:Fiber lasers operating at 1.7 μm have very important applications in biomedicine, optical imaging, laser welding, optical communication and other fields because of their rich spectral characteristics in the near-infrared band. We designed and experimentally implemented a 1.7 μm all-fiber figure-9 (F9) mode-locked laser, with a fiber Bragg grating (FBG) acting as both the mirror and the spectrum filter. The all-fiber F9 design made the laser work in the mode-locking state more efficiently. We obtained mode-locked pulses with a central wavelength of 1724.76 nm and a repetition rate of 14.39 MHz when the pump power was 1.1 W, and the pulse width was about 54 ps. Limited by the bandwidth of the FBG, the 3 dB bandwidth of the mode-locked spectrum was about 0.18 nm. The output power was 52 mW at a pump power of 2.5 W. The multi-pulse dynamics were studied by adjusting the pump power and the polarization controllers, and pulse trains of up to six pulses in a group were achieved. The 1.7 μm narrow-bandwidth all-fiber F9 mode-locked laser is simple in structure and easy to build, with potential application as a seed source in high-energy ultrashort pulse lasers.

optics,physics, applied
Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy

Kai Zhang,Nima Davoudzadeh,Guillaume Ducourthial,Bryan Q Spring

DOI: https://doi.org/10.3791/60160

2019-11-22

Abstract:A protocol is presented to build a custom low-cost yet high-performance femtosecond (fs) fiber laser. This all-normal-dispersion (ANDi) ytterbium-doped fiber laser is built completely using commercially available parts, including $8,000 in fiber optic and pump laser components, plus $4,800 in standard optical components and extra-cavity accessories. Researchers new to fiber optic device fabrication may also consider investing in basic fiber splicing and laser pulse characterization equipment (~$63,000). Important for optimal laser operation, methods to verify true versus apparent (partial or noise-like) mode-locked performance are presented. This system achieves 70 fs pulse duration with a center wavelength of approximately 1,070 nm and a pulse repetition rate of 31 MHz. This fiber laser exhibits the peak performance that may be obtained for an easily assembled fiber laser system, which makes this design ideal for research laboratories aiming to develop compact and portable fs laser technologies that enable new implementations of clinical multiphoton microscopy and fs surgery.
950 Nm Femtosecond Laser by Directly Frequency-Doubling of a Thulium-Doped Fiber Laser

Nan Zhang,Ruihong Dai,Weiqi Jiang,Yafei Meng,Bo Li,Fengqiu Wang

DOI: https://doi.org/10.1109/lpt.2022.3168297

IF: 2.6

2022-01-01

IEEE Photonics Technology Letters

Abstract:We demonstrate a compact and efficient femtosecond laser operating at ~950 nm by directly frequency-doubling of a mode-locked Tm-doped fiber laser. The laser is based on a highly compact architecture, with a dispersion-managed oscillator together with only one-step frequency conversion. The output pulse width is ~270 fs, with a repetition rate of 22.1 MHz and a pulse energy of 12.9 nJ. It is believed that the greatly simplified setup makes the current laser well suited for two-photon microscopy and other biomedical and clinical applications.
816 nm All-Fiber Mode-Locked Tm-Doped Laser in Noise-Like Pulse Regime

Chi Zhong,Jinhai Zou,Hang Wang,Tingting Chen,Qiujun Ruan,Lan Lan,Zhipeng Dong,Zhengqian Luo

DOI: https://doi.org/10.1109/lpt.2023.3340303

IF: 2.6

2024-02-01

IEEE Photonics Technology Letters

Abstract:We report, to the best of our knowledge, the first all-fiber passively mode-locked laser around 800 nm wavelength. The laser with a figure-9 cavity configuration consists of a homemade 1146 nm Raman fiber laser as pump source, a 2.1 m-length Tm $^{3+}$ -doped ZBLAN fiber, a 0.8/ $1.15~\mu \text{m}$ fiber end-facet dichroic mirror, and a nonlinear optical loop mirror (NOLM). The NOLM is not only employed as the output cavity mirror, and also initiates passive mode-locking. The mode-locked center wavelength is 816 nm with a 3-dB bandwidth of ~0.35 nm. The mode-locked rectangular pulse in the noise-like regime has a pulse duration of 486.7 ps with the 7.826 MHz repetition rate. The maximum average power is as high as 488.5 mW and the pulse energy is 62.4 nJ. This work represents an important step towards ~800 nm short-wavelength ultrafast fiber lasers and may has potential applications in biological imaging and medical treatment.

engineering, electrical & electronic,optics,physics, applied
Mid-infrared ultrashort pulses generated from a hybrid mode-locked Er:ZBLAN fiber laser

Linpeng Yu,Qinghui Zeng,Shuai Wang,Jinhui Liang,Jinzhang Wang,Jiachen Wang,Xing Luo,Peiguang Yan,Fanlong Dong,Xing Liu,Qitao Lue,Chunyu Guo,Shuangchen Ruan

DOI: https://doi.org/10.1364/OE.482012

2023-01-16

Abstract:By combining nonlinear polarization rotation (NPR) and semiconductor saturable absorber, we report a hybrid mode-locked Er:ZBLAN fiber oscillator at 2.8 µm. Stable 325-fs mode-locked pulses with an average power of 131 mW and a record signal-to-noise ratio of 79 dB at the fundamental frequency of 55.4 MHz are generated. Numerical simulations are carried out based on the modified coupled nonlinear Schrödinger equations, and offer new insights into the underlying dynamics of pulse generation. The simulations indicate that compared with Er:ZBLAN fiber lasers mode-locked by NPR alone, the hybrid mode-locked Er:ZBLAN fiber oscillator allows a wider range and a lower threshold of the pump power while maintaining the ultrashort pulse width. Moreover, we numerically demonstrate that the hybrid mode-locked oscillator is less sensitive to the variation of polarization states, which will increase its robustness against environmental disturbance. This is the first time that the hybrid mode-locking technique is applied in the mid-infrared, opening up new opportunities for the development of stable ultrafast mid-infrared laser sources and practical applications outside the laboratory.
Sub-60-fs, Compact 1100-Nm Fiber Laser System Based on Double-Pass Pre-Chirp Managed Amplification.

Kong Gao,Yizhou Liu,Wenchao Qiao,Rong Xu,Tianli Feng,Hongwen Xuan,Dechun LI,Xian Zhao,Aimin Wang,Tao LI

DOI: https://doi.org/10.1364/ol.470881

2022-01-01

Abstract:An ytterbium-doped, single-stage, double-pass nonlinear fiber amplification system was fabricated for amplifying an 1100-nm mode-locking fiber laser. Pre-chirp managed amplification (PCMA) was applied in realizing the nonlinear amplification process with an all-polarization-maintaining (PM) fiber construction. The system can deliver 19.8-nJ, 58.7-fs, 24.4-MHz amplified signal pulses with a 10-dB spectral range spanning from 1049 nm to 1130 nm. Further experimental investigations were conducted in exploring the dynamics of the double-pass nonlinear amplification process. This compact 1100-nm ultrafast fiber laser can be implemented for multi-photon microscopy (MPM) with deep penetration depth.
High energy (> 40 nJ), sub-100 fs, 950 nm laser for two-photon microscopy

Zhenqiao Zhou

DOI: https://doi.org/10.1364/OE.440254

IF: 3.8

2021-01-01

Optics Express

Abstract:Compact and high-energy femtosecond fiber lasers operating around 900-950 nm are desirable for multiphoton microscopy. Here, we demonstrate a >40 nJ, sub-100 fs, wavelengthtunable ultrafast laser system based on chirped pulse amplification (CPA) in thulium-doped fiber and second-harmonic generation (SHG) technology. Through effective control of the nonlinear effect in the CPA process, we have obtained 92-fs pulses at 1903 nm with an average power of 0.89W and a pulse energy of 81 nJ. By frequency doubling, 95-fs pulses at 954 nm with an average power of 0.46 W and a pulse energy of 42 nJ have been generated. In addition, our system can also achieve tunable wavelength from 932 nm to 962 nm (frequency doubled from 1863 nm to 1919 nm). A pulse width of similar to 100 fs and sufficient pulse energy are ensured over the entire tuning range. Finally, we applied the laser in a two-photon microscope and obtained superior imaging results. Due to a relatively low repetition rate (similar to 10 MHz), similar imaging quality can be achieved at significantly reduced average power compared with a commercial 80MHz laser system. At the same time, the lower average power is helpful in limiting the thermal load to the samples. It is believed that such a setup, with its well-balanced optical characteristics and compact footprint, provides an ideal source for two-photon microscopy. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Custom fabrication and mode-locked operation of a femtosecond fiber laser for multiphoton microscopy

Nima Davoudzadeh,Guillaume Ducourthial,Bryan Q Spring

DOI: https://doi.org/10.1038/s41598-019-40871-5

2019-03-12

Abstract:Solid-state femtosecond lasers have stimulated the broad adoption of multiphoton microscopy in the modern laboratory. However, these devices remain costly. Fiber lasers offer promise as a means to inexpensively produce ultrashort pulses of light suitable for nonlinear microscopy in compact, robust and portable devices. Although encouraging, the initial methods reported in the biomedical engineering community to construct home-built femtosecond fiber laser systems overlooked fundamental aspects that compromised performance and misrepresented the significant financial and intellectual investments required to build these devices. Here, we present a practical protocol to fabricate an all-normal-dispersion ytterbium (Yb)-doped femtosecond fiber laser oscillator using commercially-available parts (plus standard optical components and extra-cavity accessories) as well as basic fiber splicing and laser pulse characterization equipment. We also provide a synthesis of established protocols in the laser physics community, but often overlooked in other fields, to verify true versus seemingly (partial or noise-like) mode-locked performance. The approaches described here make custom fabrication of femtosecond fiber lasers more accessible to a wide range of investigators and better represent the investments required for the proper laser design, fabrication and operation.
A Compact, High Power, Ultrafast Laser Mode-Locked by Carbon Nanotubes

Z. Sun,A. G. Rozhin,F. Wang,T. Hasan,D. Popa,W. O'Neill,A. C. Ferrari

DOI: https://doi.org/10.1063/1.3275866

IF: 4

2009-01-01

Applied Physics Letters

Abstract:We report ultrafast highly chirped pulses from an erbium doped, nanotube-mode-locked fiber oscillator. We generate 1.6W average power and 11kW peak power by seeding a fiber amplifier. This paves the way to mode-locked all-fiber master oscillator amplifiers as economic and compact sources for high-power applications, such as micromachining and laser surgery.
1.5 Μm Synchronously Pumped Mode-locked Fiber Laser

Xiaogang Ge

DOI: https://doi.org/10.1109/piers-fall48861.2019.9021575

2019-01-01

Abstract:We have realized a 1.5 μm synchronously pumped mode-locked fiber laser based on pump-induced cross phase modulation (XPM). The maximum repetition rate of the fundamental mode-locked pulses is up to 9.28 MHz, which is the highest repetition rate demonstrated in synchronously pumped Er-doped all-fiber mode-locked lasers. Moreover, integral and rational harmonic mode-locked pulses have also been demonstrated.
A compact 51.6-W, 26- μ J, Yb-doped all-fiber integrated CPA system through quasi-rectangular pulse pre-shaping

Qianglong Li,Feng Li,Hongjun Liu,Wei Zhao,Hualong Zhao,Yishan Wang,Wenlong Wen,Xue Cao,Jinhai Si

DOI: https://doi.org/10.1016/j.optlastec.2023.110300

IF: 4.939

2024-03-01

Optics & Laser Technology

Abstract:A compact 51.6-W, 26- μ J all-fiber integrated Yb-doped femtosecond laser source with pulse durations of 692 fs despite ∼ 18 π nonlinear phase shift accumulation in the main amplifier is demonstrated by using fiber quasi-rectangular pulse pre-shaping. The numerical results are in good agreement with the experiment. Due to the advantages of an all-fiber spliced structure and a minimal pulse stretching ratio (from 26.3 ps to ∼ 70 ps), just a small size of gratings and a short separation distance between the two gratings in the compressor is required. Therefore, the laser source is exceedingly compact, robust, cost-effective, and easy to assemble. This technique is anticipated to accelerate the use of fiber femtosecond lasers in industrial applications.

optics,physics, applied
Compact CNT Mode-locked Ho<formula> <tex>$^{3+}$</tex> &Lt;/formula>-Doped Fluoride Fiber Laser at 1.2 Μm

Junfeng Wang,Xiushan Zhu,Yongzhong Ma,Yuchen Wang,Meiping Tong,Shijie Fu,Jie Zong,Kort Wiersma,Arturo Chavez-Pirson,Robert A. Norwood,Wei Shi,N. Peyghambarian

DOI: https://doi.org/10.1109/jstqe.2017.2771742

IF: 4.9

2017-01-01

IEEE Journal of Selected Topics in Quantum Electronics

Abstract:A diode laser pumped carbon nanotube mode-locked Ho 3+ -doped fluoride fiber laser at 1.2 μm was demonstrated for the first time. Stable mode-locked pulses with an average power of 1 mW at a repetition rate of 18.47 MHz were obtained at a pump power of 348 mW. The pulse energy and peak power of this mode-locked laser oscillator were about 54 pJ and 12.6 W, and were increased to 2.41 nJ and 0.54 kW, respectively, by using a 15-cm Ho 3+ -doped fluoride fiber amplifier. The pulse duration was measured to be 4.3 ps by an autocorrelator. Because the operation wavelength is close to the zero-dispersion wavelength of 1.3 μm, this mode-locked fiber laser exhibits unique features.
All-fiber GHz few-cycle pulse generation at 2 µm

Zhaoheng Liang,Minjie Pan,Wei Lin,Nan Zhang,Junpeng Wen,Xuewen Chen,Lin Ling,Zihan Li,Xiaoming Wei,Zhongmin Yang

DOI: https://doi.org/10.1364/OL.534971

2024-10-01

Abstract:We demonstrate an all-fiber GHz mode-locked laser system with few-cycle duration operating at 2 µm. Based on a dispersion-managed mode-locked oscillator, a multi-stage fiber amplifier, and a nonlinear pulse compressor, the laser system can deliver watt-level few-cycle pulses at a fundamental repetition rate of 1.041 GHz. This 2-µm pulsed laser offers outstanding performance metrics, including a pulse duration of 33 fs (corresponding to ∼5 optical cycles) and an average power of 4.17 W. Moreover, the all-fiber laser system exhibits excellent power stability, and the integrated relative intensity noise (RIN) is only 0.052% (10 Hz-1 MHz). It is anticipated that this new, to the best of our knowledge, laser source is promising for frontier applications, including coherent supercontinuum generation, nonlinear frequency conversion, and laser-material interaction.
All-fiber low threshold tunable multimode Q-switched mode locked fiber laser using a few mode Er-doped fiber

Yunlong Fan,Peng Zhang,Yuzhu Ning,Yang Liu,Jia Wei,Shoufeng Tong

DOI: https://doi.org/10.1088/1555-6611/acc241

IF: 1.2

2023-03-29

Laser Physics

Abstract:We report an all-fiber low threshold (70 mW) multimode Q-switched mode-locked (QML) fiber laser at 1.5 μ m. Nonlinear polarization rotation and a few mode Er-doped fiber (FM-EDF) were both adopted to achieve a low threshold QML operation initially, and the later experimental results showed and verified that the FM-EDF was the key factor of the QML pulses generation. A multimode QML state at 70 mW pump power was obtained with an 18 μs Q-switched pulse width and a 7.41 kHz repetition rate. The repetition rate and pulse width of the mode-locked pulses within the Q-switched envelope were 16.9 MHz and ∼910 ps respectively. The multimode QML fiber laser can be turned from 1561.8 nm to 1575.1 nm owing to the multimode interference and the fiber birefringence filtering effect. The QML pulses with dual-wavelength and three-wavelength were also observed by manipulating the polarization controllers and increasing the pump power. The experimental results showed that multimode QML pulses can be achieved with a short FM-EDF at a lower pump power in an all-fiber multimode cavity. The generated low threshold and tunable QML multimode fiber laser has potential application in measuring and mode-division multiplexed system.

optics,physics, applied
Yb-doped all fiber picosecond laser based on grade-index multimode fiber with microcavity

Zhipeng Dong,Shujie Li,Ruishan Chen,Hongxun Li,Chun Gu,Peijun Yao,Lixin Xu

DOI: https://doi.org/10.48550/arXiv.1809.07174

2018-09-13

Instrumentation and Detectors

Abstract:We demonstrate an all-fiber mode-locked laser at all-normal dispersion with a saturable absorber, which is based on a section of grade-index multimode fiber with inner microcavity embedded in the splice points. The absorption modulation depth of this nonlinear saturable absorber is 2.2% in the suitable bent state. The fiber laser operates at central wavelength of 1035nm with average power of ~1.26mW, pulse-duration of 17.05 ps, repetition rate of 37.098MHz. This kind of saturable absorber has superiorities of low cost, high stability and high damage threshold, which may facilitate applications in optical sensing, material processing and light detection.

Compact All-Fiber Mode-Locked Laser At 1.8 Mu M

Compact All-Fiber Mode-Locked Laser at 1.8 μm for Three-Photon Imaging

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

All-Polarization-Maintaining, Ultra-Compact Tm-Doped Fiber Laser Designed for Mid-Infrared Comb

Ultra-short Pulse Burst Laser Around 1.98 Μm Obtained Through an All-Fiber Nonlinear Wavelength Converter and Tm-doped Fiber Amplifier.

1.7 μm all-fiber figure-9 mode-locked laser based on a fiber Bragg grating

Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy

950 Nm Femtosecond Laser by Directly Frequency-Doubling of a Thulium-Doped Fiber Laser

816 nm All-Fiber Mode-Locked Tm-Doped Laser in Noise-Like Pulse Regime

Mid-infrared ultrashort pulses generated from a hybrid mode-locked Er:ZBLAN fiber laser

Sub-60-fs, Compact 1100-Nm Fiber Laser System Based on Double-Pass Pre-Chirp Managed Amplification.

High energy (&gt; 40 nJ), sub-100 fs, 950 nm laser for two-photon microscopy

Custom fabrication and mode-locked operation of a femtosecond fiber laser for multiphoton microscopy

A Compact, High Power, Ultrafast Laser Mode-Locked by Carbon Nanotubes

1.5 Μm Synchronously Pumped Mode-locked Fiber Laser

A compact 51.6-W, 26- μ J, Yb-doped all-fiber integrated CPA system through quasi-rectangular pulse pre-shaping

Compact CNT Mode-locked Ho&lt;formula&gt; &lt;tex&gt;$^{3+}$&lt;/tex&gt; &Lt;/formula&gt;-Doped Fluoride Fiber Laser at 1.2 Μm

All-fiber GHz few-cycle pulse generation at 2 µm

All-fiber low threshold tunable multimode Q-switched mode locked fiber laser using a few mode Er-doped fiber

Yb-doped all fiber picosecond laser based on grade-index multimode fiber with microcavity

High energy (> 40 nJ), sub-100 fs, 950 nm laser for two-photon microscopy

Compact CNT Mode-locked Ho<formula> <tex>$^{3+}$</tex> &Lt;/formula>-Doped Fluoride Fiber Laser at 1.2 Μm