Abstract:Dual-comb spectroscopy typically requires the utilization of two independent and phase-locked femtosecond lasers, resulting in a complex and expensive system that hinders its industrial applications. Single-cavity dual-comb lasers are considered as one of the primary solution to simplify the system. However, controlling the crucial parameter of difference in repetition rates remains challenging. In this study, we present a dual-comb mode-locked Yb:CALGO laser based on a cavity-shared configuration with separated end mirrors. We employ two pairs of end mirrors and two thin-film polarizers angled at 45 degrees to the cavity axis, leading to separating the cross-polarized laser modes. We achieve simultaneous operation of two combs at approximately 1040 nm with pulse durations of around 400 fs and an average power exceeding 1 W. The repetition rates are approximately 59 MHz and their difference can be easily tuned from zero up to the MHz range. By effectively canceling out common mode noises, we observe minimal fluctuation in the repetition rate difference with a standard deviation of about 1.9 Hz over ten minutes, while experiencing fluctuations in repetition rates as large as 90 Hz. We demonstrate the capabilities of this system by utilizing the free-running dual-comb setup for asynchronous optical sampling on a saturable absorber and measuring etalon transmission spectrum. This system allows for simple and independent control of the repetition rates and their difference during operation, facilitating the selection of optimal repetition rate difference and implementation of phase-locking loops. This advancement paves the way for the development of simple yet high-performance dual-comb laser sources.

1.9Μm Tunable Dual-Comb from a Polarization-Maintaining Single-Cavity Bidirectional Fiber Laser

1.9–2.4 μm Tunable Dual-Comb From a Polarization-Maintaining Single-Cavity Bidirectional Fiber Laser

Dual-Comb Operation in an All-Polarization-Maintaining Ultrafast Holmium-Doped Fiber Laser

Polarization-multiplexed, single-cavity dual-comb fiber laser based on a birefringent crystal and a saturable absorber.

Spectral overlapping single-cavity dual-comb fiber laser with well-controlled repetition rate difference

1015-1080 Nm Tunable Polarization-Maintaining Dissipative Soliton Mode-Locked Fiber Laser

Free-running Dual-Comb Fiber Laser Mode-Locked by Nonlinear Multimode Interference.

Dual-comb fiber laser for stable frequency distribution

Unidirectional, dual-comb lasing under multiple pulse formation mechanisms in a passively mode-locked fiber ring laser

Dual-Frequency Operation in a Short-Cavity Ytterbium-Doped Fiber Laser

Reflective and Transmissive Characteristics in an All-polarization-maintaining Linear-cavity Fiber Laser Mode-locked by Nonlinear Polarization Evolution

Tunable and switchable single-/dual-wavelength Er-doped hybrid mode-locked fiber laser by dual-PMFs Lyot filter

Bi-Directional Mode-Locked Thulium Fiber Laser as a Single-Cavity Dual-Comb Source

Nonlinear Multimode Interference-Based Dual-Color Mode-Locked Fiber Laser

Dual-comb mode-locked Yb:CALGO laser based on cavity-shared configuration with separated end mirrors

Broad bandwidth dual-wavelength fiber laser simultaneously delivering stretched pulse and dissipative soliton

In-situ aligned all-polarization-maintaining Er-doped fiber laser mode-locked by a nonlinear amplifying loop mirror

Single-polarization, switchable dual-wavelength erbium-doped fiber laser with two polarization-maintaining fiber Bragg gratings

All-polarization-maintaining fiber optical frequency comb for the dispersion measurement of a microcavity

All-polarization-maintaining dual-wavelength mode-locked fiber laser based on macro-bending loss tuning

Polarization‐duplexing of a ytterbium‐doped fiber mode‐locked laser with an intracavity birefringent crystal