Abstract:This study presents a structure design and process method for lens type LED package. Dome type or side-emitting-enhancement silicone lens without molding process are achieved. The ceramic ring is adopted as the confine for the encapsulant. The surface intension along the sidewall of ceramic ring and silicone surface, the cohesion force and the gravity of silicone determine the shape of dome type silicone lens. The cone shape tooling coated with a releasing material is immersed into the dome type silicone lens before the silicone fully hardening. After curing simultaneously, to remove the tooling from package, the package with side-emitting-enhancement silicone lens is finished. With the mentioned architecture and process, this LED package herein has three merits, (1) to improve light extraction efficiency: reduce the chance of total internal reflection by the geometry of dome type silicone lens. (2)To enhance the flexibility of LED package design, the die placement location would be constrained by the mold in the traditional package process. (3) Mold-less side-emitting-enhancement silicone lens. Furthermore, two types of cone shape tooling are implemented and compared for side-emitting-enhancement silicone lens. Measurement results show the ratio between the lens high and lens radius could achieve 0.9:1. The view angles of dome type and side-emitting-enhancement LED packaged devices can reach 153° and 180 °, respectively. As using the same brightness grade of LED chip, the luminous flux is increasing 15% as compared the dome type package with the commercial PLCC (Plastic Leaded Chip Carrier) type package. The luminous flux of side-emitting-enhancement LED package decreases 8% as compared with the dome type one.

Design and fabrication of a foldable 3D silicon based package for solid state lighting applications

A High-Voltage LED Driver Using SOI Technology

Three-dimensional SMS Design to Optimize LED Lighting

Unusual Strategies For Using Indium Gallium Nitride Grown On Silicon (111) For Solid-State Lighting

Geometric optimization of high performance interconnect of Rigid/Flexible/Rigid substrate for Wafer Level Packaging in Solid State Lighting applications by numerical simulations

Silicon based wafer-level packaging for flip-chip LEDs

3D integration of micro optical components on flexible transparent substrate with through-hole- vias

System in Package (sip) Technology: Fundamentals, Design and Applications

Development of passive and active microprism arrays to change the radiation pattern of solid-state lighting

Led Package with Dome/Side-Emitting-Enhancement Silicone Lens Achieved by Dispensing and Geometry Transferring

Polymer Dispensing and Embossing Technology for the Lens Type LED Packaging

Stretchable and Foldable Silicon Integrated Circuits

A universal approach for photonic integration on flexible substrates

A Review of Moldflow and Finite Element Analysis Simulation of Chip Scale Packaging (CSP) for Light Emitting Diode (LED)

Integrated Flexible Chalcogenide Glass Photonic Devices

Flexible Light Emission Diode Arrays Made Of Transferred Si Microwires-Zno Nanofilm With Piezo-Phototronic Effect Enhanced Lighting

Two-step Design Method for Highly Compact Three-Dimensional Freeform Optical System for LED Surface Light Source

Thermal Management for Microscale Inorganic Light-Emitting Diodes

3D Integrated Photonics Platform with Deterministic Geometry Control

Printed Assemblies of Inorganic Light-Emitting Diodes for Deformable and Semitransparent Displays

Wide angle mini-LEDs combined with multifocal micro reflector cavity for thin portable device flashlight