Abstract:This paper presents the modeling and optimization of a manifold-coupled superconducting quadruplexer at VHF-band. The quadruplexer consists of four individually designed channel filters with a bandwidth of 400 kHz centered at 216, 224, 232, and 240 MHz, respectively, connected to a common manifold. The complex interactions between the channel filters make the design and optimization of the quadruplexer difficult and even impossible. An equivalent circuit for the manifold and the capacitive external couplings of the four channel filters in the quadruplexer is presented. The parameters of the equivalent circuit are accurately extracted from electromagnetic simulations. Afterward, the equivalent circuit is optimized to compensate for the interactions between the channel filters and obtain a good common-port return loss and channel transfer characteristics. Thereafter, the design of the individual channel filters is improved according to the optimized parameters of the equivalent circuit. The superconducting quadruplexer is successfully designed and fabricated. The measurements show high performance and match well with the simulations. The experimental insertion losses of the four channels are less than 0.45 dB, the center frequency discrepancies of the four channels are less than 40 kHz, the common-port return loss is greater than 16.3 dB, and the out-of-band rejection is higher than 90 dB. Moreover, a high isolation greater than 75 dB between the channels is achieved.

Miniaturized high-temperature superconducting multiplexer with cascaded quadruplet structure

A Compact HTS Duplexer for Communication Application

Design of high selectivity narrowband eight-order high-temperature superconducting sextaplexer

Miniaturized High-Temperature Superconducting Diplexer Using Common Resonator and Cross Coupling Structure

An LTCC duplexer for GSM/DCS applications

Design of Quad-Channel High-Temperature Superconducting Diplexer Using Spiral Stub-Loaded Resonators

Design of High-Isolation Topological Duplexer Utilizing Dual-Edge State Topological Waveguides

Compact, Low Insertion-Loss, and Wide Stopband HTS Diplexer Using Novel Coupling Diagram and Dissimilar Spiral Resonators

Design and Implementation of A Narrow-Band Superconducting X-Band Diplexer with High Isolation

Design and Performance of a Compact Superconducting Duplexer at VHF-band

Design and Optimization of a Compact Superconducting Quadruplexer at VHF-Band with an Accurate Equivalent Circuit Model

Compact triple-band high-temperature superconducting filter using multimode stub-loaded resonator for ISM, WiMAX, and WLAN applications

A Superconducting Manifold-Coupled Triplexer with an Iterative Design Method at X-Band

A Narrowband Superconducting Quadruplexer with High Isolation

Compact High-Temperature Superconducting Filter Using Multimode Stub-Loaded Resonator

New Design of a Compact 6-Pole Reconfigurable Narrowband Triplexer Based on Common Net-type Resonator

High-Performance Compact Multi-Mode UWB Filter Using High-Temperature Superconductivity

Design and Optimization of a Superconducting Contiguous Diplexer Comprising Doubly Terminated Filters

Compact Superconducting Diplexer Design with Conductor-Backed Coplanar Waveguide Structures

High Isolation Superconducting Diplexer Designed with Double-side Structure

A Compact Multiplexer for Linear Accelerator Systems