Abstract:ABSTRACT In this paper, a design procedure of a compact broadband microstrip diplexer working on the Very High Frequency (VHF)/Ultrahigh Frequency (UHF) band is proposed. The diplexer consists of a fourth‐order Butterworth Low‐Pass Filter (LPF) and a sixth‐order elliptic High‐Pass Filter (HPF). The two filters are located on two substrates with a common ground. A microstrip‐to‐coaxial structure is utilized to transmit the power flow between the two substrates. For miniaturization, the utilized ideal capacitors and inductors are realized by the commercial lumped‐element capacitors and the curved microstrip line sections, respectively. All the middle design and rapid optimization processes from the schematic simulation by Advanced Design System (ADS) to the circuit simulation by CST STUDIO SUITE (CST) are given in the article. A prototype is fabricated and measured. The testing results are consistent with the simulation. The diplexer can operate at 225–775 and 880–2500 MHz. The insertion losses are 0.8 ± 0.3 and 0.9 ± 0.4 dB in the two working bandwidths. The isolation bandwidth of −20 dB level is as small as 105 MHz. The roll‐off is also sharp that the related bandwidths corresponding to the attenuation level −3 to −20d B are 90 and 30 MHz to the high and low bands, respectively. Besides, the return loss and isolation are larger than 10 and 20 dB approximately. The diplexer has a volume of 0.065 λ g × 0.156 λ g @775 MHz, which can be utilized to feed the miniaturized broadband VHF/UHF antenna system.

A Compact HTS Duplexer for Communication Application

An LTCC duplexer for GSM/DCS applications

Design and Performance of a Compact Superconducting Duplexer at VHF-band

Design of High-Isolation Topological Duplexer Utilizing Dual-Edge State Topological Waveguides

Miniaturized high-temperature superconducting multiplexer with cascaded quadruplet structure

Compact, Low Insertion-Loss, and Wide Stopband HTS Diplexer Using Novel Coupling Diagram and Dissimilar Spiral Resonators

Miniaturized High-Temperature Superconducting Diplexer Using Common Resonator and Cross Coupling Structure

Design of Quad-Channel High-Temperature Superconducting Diplexer Using Spiral Stub-Loaded Resonators

Design and Implementation of A Narrow-Band Superconducting X-Band Diplexer with High Isolation

Design of high selectivity narrowband eight-order high-temperature superconducting sextaplexer

Design of A Compact Broadband Microstrip Line Diplexer for VHF/UHF Frequency Range

Compact Superconducting Diplexer Design with Conductor-Backed Coplanar Waveguide Structures

Design and Optimization of a Superconducting Contiguous Diplexer Comprising Doubly Terminated Filters

Design and performance of a compact forward-coupled HTS microstrip filter for a GSM system

Design of Compact Superconducting Diplexer with Spiral Short-Circuited Stubs

High-isolation high-temperature superconductive diplexer and design method thereof

Design and Rapid Optimization Procedure of a Compact Broadband Microstrip Diplexer for VHF/UHF Band

Compact Microstrip Diplexer Based on a Novel Coupling Topology

A Superconducting Manifold-Coupled Triplexer with an Iterative Design Method at X-Band

A broadband diplexer-integrated double-pole single-throw switch for FDD/TDD operations

Compact triple-band high-temperature superconducting filter using multimode stub-loaded resonator for ISM, WiMAX, and WLAN applications