Abstract:High computing demands and data privacy regulations from many countries in the world have resulted in the expansion of data centers. With this, energy consumption by data centers has increased to an alarming level. Data centers are highly dynamic due to time-dependent server heat generation and cold-hot aisle arrangements, making it difficult to have real-time control for efficient thermal management. Traditional cooling strategies based on conservative set points affect energy consumption. Instead of expensive field measurements, CFD analysis of the flow field inside the data center can provide insightful data to assist the heat release from the racks. The detailed rack-level flow field inside the data center is missing in the literature as most of the studies are based on approximate results using the RANS-based k—ε model. However, DES-based models have shown the ability to resolve complex flow fields. With this finding, rack-level CFD analysis of the data center is performed using DES and standard k—ε techniques. At first, average rack inlet and outlet air temperatures in steady-state were validated with experiments within the accuracy of 1.4 µC. The distributions of turbulent kinetic energy and mean velocity inside the cold aisle were examined. The recirculation region in the cold aisle was well-captured by the DES and qualitatively validated with the experiments compared to the k—ε model. The k—ε model failed to predict SHI, RTI, and β metrics, whereas the DES model successfully captured recirculation and self-heating of the upper servers. An acceptable trade-off between computational cost and accuracy for the simulations would be a pivotal parameter for the selection of either DES or the k—ε model for the data center CFD analysis. The porous media assumption of the servers can bring uncertainties for turbulent quantities and hence further DES model for a data center can provide additional insights in this study.

Innovative approaches of experimentally guided CFD modeling for data centers

A Cfd-Based Test Method For Control Of Indoor Environment In Air-Conditioned Rooms

Guidance for data-center CFD (RP-1675)

Analytical Modeling of Forced-Air Cooling Heatsink by Considering Air Temperature Rise in Channel and Coupling of Multiple Heat Sources

CFD Modeling of the Distribution of Airborne Particulate Contaminants Inside Data Center Hardware

An open-source and experimentally guided CFD strategy for predicting air distribution in data centers with air-cooling

Comparison of detached eddy simulation and standard k—ε RANS model for rack-level airflow analysis inside a data center

Three computational methods for analysing thermal airflow distributions in the cooling of data centres

Numerical and experimental dataset for a retrofitted data center

A Simulation-Based Approach to Data Center Thermal Efficiency Optimization

Development and validation of an open-source CFD model for the efficiency assessment of data centers

A hybrid lumped capacitance-CFD model for the simulation of data center transients

A parametric CFD study of computer room air handling bypass in air-cooled data centers

BIM and Computational Fluid Dynamics Analysis for Thermal Management Improvement in Data Centres

Appropriate CFD Turbulence Model for Improving Indoor Air Quality of Ventilated Spaces

CFD modelling of velocity fields around a fume cupboard: Evaluating static and dynamic meshes with experimental measurements

Simulation study on Air Outlet of Data Center

Study of CFD-Based Raised-Floor Data Center Cooling With Parametric CRAC Turbofan Blower Airflow Patterns

Experiment and multiphase CFD simulation of gas-solid flow in a CFB reactor at various operating conditions: Assessing the performance of 2D and 3D simulations

Cooling Effectiveness of a Data Center Room under Overhead Airflow via Entropy Generation Assessment in Transient Scenarios

A Method Toward Real-Time CFD Modeling for Natural Ventilation