Abstract:Indoor computational fluid dynamics (CFD) simulations can predict contaminant dispersion around human occupants and provide valuable information in resolving indoor air quality or homeland security problems. The accuracy of CFD simulations strongly depends on the appropriate setting of boundary conditions and numerical simulation parameters. The present study explores influence of the following three key boundary condition settings on the simulation accuracy: (1) contaminant source area size, (2) convective/radiative heat fluxes, and (3) shape/size of human simulators. For each of the boundary conditions, numerical simulations were validated with experimental data obtained in two different environmental chambers. In CFD simulations, a small release area of a contaminant point source causes locally high concentration gradients that require a very fine local grid system. This fine grid system can slow down the simulations substantially. The convergence speed of calculation is greatly increased by the source area enlargement. This method will not influence the simulation accuracy of passive point source within well-predicted airflow field. However, for active point source located within complicated airflow filed, such an enlargement should be carried out cautiously because simulation inaccuracy might be introduced. For setting thermal boundary conditions, convection to radiation heat flux ratio is critical for accurate CFD computations of temperature profiles around human simulators. The recommended convection to radiation (C:R) ratio is 30:70 for human simulators. Finally, simplified human simulators can provide accurate temperature profiles within the whole domain of interest. However, velocity and contaminant concentration simulations require further work in establishing the influence of simplifications on the simulation accuracy in the vicinity of the human simulator.

CFD modelling of velocity fields around a fume cupboard: Evaluating static and dynamic meshes with experimental measurements

A Cfd-Based Test Method For Control Of Indoor Environment In Air-Conditioned Rooms

Investigation on Improving Fume Hood Performance Via Elimination of Internal Vortices: Experiments and CFD

Validation of CFD Model for Research into Displacement Ventilation

CFD Modeling of Particle Dispersion and Deposition Coupled with Particle Dynamical Models in a Ventilated Room

CFD Study on Gaseous Pollutant Transmission Characteristics under Different Ventilation Strategies in a Typical Chemical Laboratory

Simulation of Heavy Gas Dispersion in A Large Indoor Space Using Cfd Model

CFD boundary conditions for contaminant dispersion, heat transfer and airflow simulations around human occupants in indoor environments

Experimental and Numerical Investigations on the Flow Field in a Subway-Station Model

Field Modeling On Smoke Filling In A Large Space Building

Modeling transient particle transport in transient indoor airflow by fast fluid dynamics with the Markov chain method

On Simulation and Experiment of Flow Field of Combustion Coal Fallout Detection Instrument Based on CFD

Innovative approaches of experimentally guided CFD modeling for data centers

Experimental and Numerical Study of Ceiling Jet Fire in a Confined Reduced-scale Corridor

Appropriate CFD Turbulence Model for Improving Indoor Air Quality of Ventilated Spaces

Classroom aerosol dispersion modeling: experimental assessment of a low-cost flow simulation tool

Transport cabin environments ACCURATE EXPERIMENTAL MEASUREMENTS OF FLOW BOUNDARY CONDITIONS FOR NUMERICAL SIMULATIONS IN AN AIRCRAFT CABIN

Experimental assessment of modelling VOC emissions from particleboard into a ventilated chamber

CFD simulation in a vertical display cabinet with environment air supply

Assessment of Turbulence Models and Air Supply Opening Models for CFD Modelling of Airflow and Gaseous Contaminant Distributions in Aircraft Cabins

Validation Of Cfd Model For Research Into Application Of Displacement Ventilation To Hong Kong Buildings