Abstract:In order to improve the bonding strength between calcium phosphate/chitosan composite coatings and a micro-arc oxidized (MAO)-AZ91D Mg alloy, different influencing parameters were investigated in the process of electrophoretic deposition (EPD) followed by conversion in a phosphate buffer solution (PBS). Surface morphology and phase constituents of the as-prepared materials were investigated by using X-ray diffractometer (XRD), Fourier-transformed infrared spectrophotometer (FTIR), Raman spectrometer, scanning electron microscope (SEM) with an energy dispersive spectrometer (EDS), and a thermo gravimetric and differential thermal analyzer (TG-DTA). Scratch tests were carried out to study the bonding properties between the coatings and the substrates. In vitro immersion tests were conducted to determine the corrosion behaviors of samples with and without deposit layers through electrochemical experiments. In the EPD process, the acetic acid content in the electrophoresis suspension and the electrophoretic voltage played important roles in improving the bonding properties, while the contents of chitosan (CS) and nano-hydroxyapatite (nHA, Ca-10(PO4)(6)(OH)(2)) in the suspension had less significant influences on the mechanical bonding strength. It was observed that the coatings showed the excellent bonding property when an electrophoretic voltage was in a range of 40-110 V with other reagent amounts as follows: acetic acid: 4.5 vol.%, CS <= 0.25 g, nHA <= 2.0 g in 200 ml of a CS-acetic acid aqueous solution and nHA <= 2.5 g in 300 ml of absolute ethanol. The morphology of the composite coating obtained under the above optimal condition had a flake-like crystal structure. The EPD in the nHA/CS-acetic acid/ethanol suspension resulted in hydroxyapatite, chitosan, brushite (DCPD, CaHPO4 center dot 2H(2)O) and Ca(OH)(2) in the coatings. After the as-prepared coating materials were immersed into PBS, Ca(OH)(2) could be converted into HA and DCPD. The results of the electrochemical tests manifested that the corrosion resistance of the Mg alloy was improved by coating this composite film. (C) 2012 Elsevier B. V. All rights reserved.

Effect of Laser Surface Texturing Depth and Pattern on the Bond Strength and Corrosion Performance of Phosphate Conversion Coating on Magnesium Alloy

Enhanced Bond Strength for Micro-Arc Oxidation Coating on Magnesium Alloy Via Laser Surface Microstructuring

Preparation and Corrosion Behaviors of Calcium Phosphate Conversion Coating on Magnesium Alloy

Effect of Phosphate Additive on the Morphology and Anti-Corrosion Performance of Plasma Electrolytic Oxidation Coatings on Magnesium―lithium Alloy

Study on the Bonding Strength Between Calcium Phosphate/chitosan Composite Coatings and a Mg Alloy Substrate

Effect of Ph Value and Preparation Temperature on the Formation of Magnesium Phosphate Conversion Coatings on AZ31 Magnesium Alloy

Probing the effect of microstructural difference of AZ91D magnesium alloys on the corrosion resistance of phosphate conversion coatings

Effect of Ca2+on Phosphate Conversion Coating on Magnesium Alloy

Study on the Phosphate/electrophoretic Composite Coatings on Mg Alloy: the Effect of Phosphate Conversion Films on Adhesion Strength and Corrosion Resistance

Improve the binding force of PEEK coating with Mg surface by femtosecond lasers induced micro/nanostructures

Effect of Surface Pre-Treatments on the Formation and Degradation Behaviour of a Calcium Phosphate Coating on Pure Magnesium

Tuning the nucleation kinetics of phosphate chemical conversion coating on Mg-Gd-Y-Zr magnesium alloy: The effect of pretreatment and organic additive

Influence of Surface Pre-Treatment on the Deposition and Corrosion Properties of Hydrophobic Coatings on A Magnesium Alloy

Structure and Formation Mechanism of Phosphate Conversion Coating on Die-Cast Az91d Magnesium Alloy

The Study of a Phosphate Conversion Coating on Magnesium Alloy AZ91D: III. Nano-particle Modification

Portland Cementitious Coating with Autogenerated Oxide Film and Its Anticorrosion Behavior on Magnesium Alloy

Preparation of Conductive and Corrosion Resistant Phosphate Conversion Coating on AZ91D Magnesium Alloy

Progress of laser surface treatment on magnesium alloy

Composite Microstructure and Formation Mechanism of Calcium Phosphate Conversion Coating on Magnesium Alloy

Calcium and Phosphate Biocoatings on Magnesium Alloy Fabricated by Micro-Arc Oxidation

Effect of surface treatment methods on the interfacial behavior of fiber metal laminate based on WE43 magnesium alloy