Abstract:Magnesium alloys are potentially attractive biodegradable materials. However, their rapid corrosion rate limits their biomedical application. To slow down the rate of biodegradation, a protective calcium-phosphate coating was formed on a magnesium alloy substrate by a hydrothermal method. Scanning electron microscope results showed that the coating consisted of two layers with different crystalline characteristics. The loose outer layer showed a prism-like crystal structure, while the compact inner layer is a dense ultra-fine regular di-pyramid-like structure with an average grain dimension of ∼200 nm. The compositions of the inner layer and outer layer were calcium-deficient hydroxyapatite (Ca-def HA) and dicalcium phosphate (DCPa), respectively. The coating adhered well to the substrate with a thickness of about 15 μm. Immersion in Hank’s solution indicated that the coating could significantly improve the degradation properties of magnesium alloy. The pH of the solution containing the coated samples increased much more slowly than the untreated control. After 8 d immersion, the uncoated sample had corroded seriously while the coated sample was much less corroded. The Ca/P atom ratio in both the layers of the coating increased and the coating was still protecting the substrate. The two layers of the coating corroded differently because of differences in solubility. The outer layer was more severely attacked and many holes were formed on the surface, the inner layer suffered less attack. In addition, a growth of precipitate on the inner layer was observed, indicating that surface bioactivity was improved by the coating. Thus, magnesium alloys coated with a Ca-P coating prepared by a hydrothermal method are promising candidate biodegradable biomaterials, and further investigation of in vivo degradation behavior is suggested.

The effects of chemical conversion parameters on morphology and corrosion performance of calcium phosphate coating on AZ31 alloy

Corrosion Behavior of Fluorine-Doped Calcium Phosphorus Coating on AZ31 Alloy with Various Chemical Conversion Parameters

The Effects of a Phytic Acid/calcium Ion Conversion Coating on the Corrosion Behavior and Osteoinductivity of a Magnesium-Strontium Alloy

Effects of phosphates on microstructure and bioactivity of micro-arc oxidized calcium phosphate coatings on Mg-Zn-Zr magnesium alloy

Hydrothermal synthesis and characterization of calcium phosphate-based coatings on AZ31 magnesium alloy

Precipitation Control And Mechanical Property Of Calcium Phosphate-Coated Az31b Alloy For Biomedical Application

Corrosion and in vitro characteristics of cerium phosphate based chemical conversion coating on AZ31 magnesium alloy

Controllable Synthesis of Nanostructured Ca-P Coating on Magnesium Alloys via Sodium Citrate Template-Assisted Hydrothermal Method and Its Corrosion Resistance

The Effects of ECAP, Mn and Ca Elements on the Microstructure and Corrosion Properties of Magnesium Alloys Were Investigated

Preparing Ca-P Coating on Biodegradable Magnesium Alloy by Hydrothermal Method: in Vitro Degradation Behavior

Effects of calcium glycerophosphate concentration on micro-arc oxidation coating of Mg alloy

Corrosion Resistance and Biocompatibility of Calcium Phosphate Coatings with a Micro-Nanofibrous Porous Structure on Biodegradable Magnesium Alloys

Effect of phosphating solution pH value on the formation of phosphate conversion coatings for corrosion behaviors on AZ91D

Effects of composition and hierarchical structures of calcium phosphate coating on the corrosion resistance and osteoblast compatibility of Mg alloys

The effects of electrodeposition temperature on morphology and corrosion resistance of calcium phosphorus coatings on magnesium alloy: comparative experimental and molecular dynamics simulation studies

Corrosion Resistance of Dicalcium Phosphate Dihydrate/poly(lactic-Co-glycolic Acid) Hybrid Coating on AZ31 Magnesium Alloy

The regulation of organic molecules to the morphology and corrosion protection ability of CaCO 3 coating on biomedical MgZnCa alloy

A polyphenol‐induced hydroxyapatite coating modulates corrosion resistance and biocompatibility of magnesium alloys

Formation of a calcium hydrogen phosphate coating on AZ41 magnesium alloy by ultrasound-assisted chemical conversion for concrete formwork

Influence of the Ca- or P-containing Electrolyte Compositions on Properties of Micro-arc Oxidation Coatings Fabricated on Mg Alloy

Electrochemical methods, quantum chemical, and molecular dynamics methods to analyze the corrosion inhibition mechanism of phytic acid/praseodymium composite conversion coating on the AZ31B magnesium alloy