Abstract:Biodegradable implants are a new concept to substitute current nondegradable medical materials. The biodegradable implant can decompose in the patients' body when the treatment is finished and be discharged through metabolism. Mg alloys, with their biocompatibility and high reactivity, meet the requirements of a biodegradable material. Also, Mg has a similar density to the human bones and the lowest elastic modulus among the structural metallic biomaterials, which can mitigate the stress shielding effect. For Mg-Zn-Ca alloys, besides the merits of Mg, Zn is related to bone metabolism and osteopathic phosphate activity, while Ca is the main element of bones that is essential for the synthesis of bone compounds. However, the degradation rate of Mg alloy implants needs to be controlled, or the implant may corrode too fast, causing local hydrogen accumulation and alkalization that hurts the patients. One of the effective ways to improve the alloy corrosion resistance is by coating. Ca-P coatings, such as brushite (dicalcium phosphate dihydrate, DCPD) and hydroxyapatite (HA), can mitigate the degradation rate of Mg alloys and show good biocompatibility and osseointegration. Electrodeposition is a simple way to synthesize coatings on metallic materials with an easy experimental set-up, and the process parameters are highly controllable. Even though there are plenty of reports about the fabrication of Ca-P coatings on Mg alloys through electrodeposition, few of them focus on the film formation mechanism. Issues related to coating defect formation and inhomogeneity are rarely discussed. Therefore, this report focuses on the film formation mechanism and the relationship to the defects of the electrodeposited DCPD coating on a Mg-2.5wt%Zn-1wt%Ca alloy. By altering the deposition potential, the reduction reactions that proceed on the substrate are different. The involvement of H 2 O reduction affects the formation of DCPD and changes the microstructure of the coating. Combining electrochemical tests and microstructure analysis, the corrosion properties of the coatings are measured, and the results are linked to the difference in film microstructure and defects. With SEM/FIB cross-sectional observations, the formation mechanism of the coatings and the relationship to the process condition will be discussed. The degradation rate of Mg alloys can be tuned by understanding the DCPD film formation mechanism and the cause of the defects.

The effects of electrodeposition temperature on morphology and corrosion resistance of calcium phosphorus coatings on magnesium alloy: comparative experimental and molecular dynamics simulation studies

Study on structure and properties of microarc oxidation coating on magnesium alloy in phosphate-potassium hydroxide solution

The Effects of ECAP, Mn and Ca Elements on the Microstructure and Corrosion Properties of Magnesium Alloys Were Investigated

Preparing Ca-P Coating on Biodegradable Magnesium Alloy by Hydrothermal Method: in Vitro Degradation Behavior

Effects of calcium glycerophosphate concentration on micro-arc oxidation coating of Mg alloy

Effect of Strontium-Substituted Calcium Phosphate Coatings Prepared by One-Step Electrodeposition at Different Temperatures on Corrosion Resistance and Biocompatibility of AZ31 Magnesium Alloys

Study on effects of heat treatment on morphology of Al coating on the surface of Mg alloy by cold spray

Effects of phosphates on microstructure and bioactivity of micro-arc oxidized calcium phosphate coatings on Mg-Zn-Zr magnesium alloy

The effects of chemical conversion parameters on morphology and corrosion performance of calcium phosphate coating on AZ31 alloy

Hydrothermal synthesis and characterization of calcium phosphate-based coatings on AZ31 magnesium alloy

Corrosion Resistance and Biocompatibility of Calcium Phosphate Coatings with a Micro-Nanofibrous Porous Structure on Biodegradable Magnesium Alloys

(Digital Presentation) Formation Mechanism and Defects of Electrodeposited Ca-P Coating on Biodegradable Mg-Zn-Ca Alloy

Characterization and Degradation Study of Calcium Phosphate Coating on Magnesium Alloy Bone Implant in Vitro

Effects of composition and hierarchical structures of calcium phosphate coating on the corrosion resistance and osteoblast compatibility of Mg alloys

Structural, morphological and adhesive properties of calcium phosphate coatings formed on magnesium alloy by micro-arc oxidation method in electrolyte containing dispersed particles

Effects of hydroxyapatite coatings on enhanced corrosion protection and cytocompatibility of high-purity magnesium

Calcium Phosphate Coating on Magnesium Alloy for Modification of Degradation Behavior

Corrosion Behavior of Fluorine-Doped Calcium Phosphorus Coating on AZ31 Alloy with Various Chemical Conversion Parameters

Precipitation Control And Mechanical Property Of Calcium Phosphate-Coated Az31b Alloy For Biomedical Application

The Effects of a Phytic Acid/calcium Ion Conversion Coating on the Corrosion Behavior and Osteoinductivity of a Magnesium-Strontium Alloy

Influence of Different Electrolyte Additives and Structural Characteristics of Plasma Electrolytic Oxidation Coatings on AZ31 Magnesium Alloy