Abstract:In recent years, there has been great interest in developing cooling systems with humidity- and temperature-independent control capabilities that can operate efficiently at varying temperatures. This paper proposes a bi-loop double-evaporator ejection–compression cycle, which utilizes low-grade heat and is suitable for the construction industry. The proposed cycle involves the concurrent operation of a vapor compression cycle and an ejector refrigeration cycle that enables it to handle altered pressure levels and operate with varying compression ratios all the way to a common condenser pressure. Conventional computational fluid dynamics (CFD) approaches often model steam as an ideal gas with single-phase flow. In contrast, this research employs the wet steam model to optimize ejector geometry. The wet steam model takes into account non-equilibrium water vapor condensation, thus providing a more precise assessment of spontaneous condensation behavior and its impact on ejector performance. When compared to the conventional dry gas model, the use of the wet steam model dramatically decreases the entrainment ratio error from 16.24% for single-phase steam to 3.92% when compared to experimental data. This study concentrates on four critical attributes of wet steam, including Mach number, droplet nucleation rate, average droplet radius, and liquid mass fraction, to develop a strategy for enhancing ejector performance and efficiency. The study demonstrates that optimal area and primary nozzle diameter ratios for the steam ejector are 5 and 2.4, respectively. Increasing the area ratio mitigates condensation intensity, thereby reducing the liquid mass fraction in the diffuser. Overall, this paper provides valuable insights into improving and optimizing ejector performance, thus highlighting the importance of considering the behavior of spontaneous condensation in ejector design and modeling.

CFD modeling and analysis of brine spray evaporation system

An Experimental and Numerical Study on the Brine Droplet Evaporation Considering Salt Precipitation

Experimental and numerical investigation on evaporation characteristics of high salinity wastewater by rotary spray

Simulation of desulphurization wastewater evaporation through flue gas

Process simulation on atomization and evaporation of desulfurization wastewater and its application

Development of a Model for Spray Evaporation Based on Droplet Analysis

Numerical modeling and validation of evaporation and discharge of low-level radioactive wastewater based on high-pressure spray technology

Optimization study of a closed-cycle low-temperature evaporation system based on mathematical model and CFD

Numerical Analysis of Steam Ejector Performance with Non-Equilibrium Condensation for Refrigeration Applications

Research on atomization evaporation characteristics and parameter optimization of a novel spray evaporation desalting system

Numerical Simulation Of Spray Evaporation Characteristics In Desulfuerization Reactor

Unsteady-state Modeling and Analysis of a Spray-Assisted Low-Temperature Desalination System

Simulation and Experimental Study of Circulatory Flash Evaporation System for High-Salt Wastewater Treatment

Experimental Investigation of Low Temperature Distillation Coupled with Spray Evaporation

Distribution of Brine Temperature in a Large-Scale Horizontal-Tube Falling Film Evaporator

CFD Modeling of MEA-based CO2 Spray Scrubbing with Computational-Effective Interphase Mass Transfer Description

Thermodynamic and Exergoeconomic Analysis for Multi-Stage Spray Flash Evaporation Desalination System

Heat and mass transfer characteristics of evaporation and salt crystallization process of a saline droplet during depressurization

Study on a Novel Spray-Evaporation Multi-Effect Distillation Desalination System

Establishment of reaction engineering approach for saline droplet and its application in spray evaporation simulation

The CFD Simulation on Heat and Mass Transfer of Vertical Evaporative Condenser