Evaporation process for treating high-salinity industrial wastewater at low temperatures and ambient pressure

Haoming Li,Heli Wang,Qingsong Liu,Yao Tan,Nan Jiang,Yingzi Lin
DOI: https://doi.org/10.1080/19443994.2016.1167126
IF: 1.1
2016-04-06
Desalination and Water Treatment
Abstract:High-salinity industrial wastewater is difficult to treat. In this study, an evaporation process for use in cooling towers and seawater desalination was adapted to treating high-salinity wastewater under gentle operating conditions. Real wastewater and simulated wastewater containing sodium chloride and glucose were used in this study. An evaporation unit, with an evaporation rate of 5 L/h, was designed and installed in the laboratory. Analysis revealed the effects of operating factors on the quality of condensed water, as well as the relationship between the mass transfer coefficient and wastewater characteristics. The results showed that for the selected system, when the inlet air speed was below 2.5 m/s and the wastewater flow rate was below 1.0 m3/h, the total dissolved solids and the chemical oxygen demand removal efficiencies could reach up to 99.9%. The most significant difference between the mass transfer coefficients of the clean water and simulated wastewater was 30.9% under identical operating conditions. The equation of the mass transfer coefficient considering the density, viscosity, and saturated vapor pressure of wastewater was built to predict the mass transfer efficiency for this process. A case study using real wastewater from a pharmaceutical factory illustrated that the system performed well in practical situations. The predicted mass transfer coefficient agreed well with the measured value. In summary, the developed evaporation system has good prospects for the treatment of high-salinity industrial wastewater.
engineering, chemical,water resources
What problem does this paper attempt to address?