Abstract:Multi‐resin hybrid composites laminate preparation. This research investigates the influence of kevlar and glass fiber reinforcements on the mechanical and thermal properties of epoxy/vinyl ester (hybrid resin) composite. The hybrid resin was synthesized by achieving an interpenetrating network between epoxy and vinyl ester. The composites were characterized using tensile, flexural, impact, and thermo‐gravimetric analysis (TGA). Scanning electron microscopy was employed to analyze surface morphology whereas Fourier‐Transformation Infrared Spectroscopy (FT‐IR) was used to investigate the possible interaction between the constituents of the composites. The findings have shown a notable improvement in the mechanical properties after the hybridization of the resin. For reference, the tensile strength of glass/hybrid resin and kevlar/hybrid resin composites were observed to increase by 8.33% and 23.65%, as compared to glass/epoxy and kevlar epoxy composites respectively, whereas, the bending strength of these composites was improved by 8.36% and 30.61%, respectively. TGA also showed an enhanced thermal stability of the hybrid resin‐based composites. Such improvements are noticed due to multi‐resin incorporation (the oxirane group of epoxy reacts with the hydroxyl group of vinyl ester), confirmed by the FTIR, TGA, and morphological analysis. This study signifies that the proposed hybrid composites are better in terms of strength and modulus relative to conventional metallic materials. Highlights The paper presents the development of novel hybrid resin, reinforced with synthetic fibers. Hybrid resin is imparted positively and is highly favorable in improving the mechanical properties of composites. The tensile strength of novel composites is increased by 8.33% and 23.65% relative to their base specimens, and a similar trend is observed in flexural and impact analysis. Fractured analysis showed that composite laminates deteriorated more intensely due to cohesive matrix fracture; adhesion failure was not observed at all, as evidenced by the emergence of micro‐cracks in resin. Developed novel composites exhibited maximum thermal stability; residual char in glass/epoxy/vinyl‐ester composite attained 17.81% higher, whereas kevlar/epoxy/vinyl‐ester achieved 3.56% relative to glass/epoxy and kevlar/epoxy base samples.

Experimental investigation on influence of Kevlar fiber hybridization on tensile and damping response of Kevlar/glass/epoxy resin composite laminates

Fabrication and Experimental Estimation of Mechanical Properties of Kevlar-Glass/Epoxy Interwoven Composite Laminate

Experimental Investigation on Tensile Properties of Carbon Fabric-Glass Fabric-Kevlar Fabric-Epoxy Hybrid Composite Laminates

Development and characterization of kevlar and glass fibers reinforced epoxy/vinyl ester hybrid resin composites

Hybridization effect of Kevlar and glass fiber on carbon/epoxy composites to enhance the damage strength under low velocity impact. Part II: Numerical simulations

The influence of the inter-ply hybridisation on the mechanical performance of composite laminates: Experimental and numerical analysis

Mechanical and vibration response of insulated hybrid composites

Temperature effects on tensile and bending properties of carbon/Kevlar hybrid fiber sandwich composites

Influence of Kevlar Hybridization on Dielectric and Conductivity of Bamboo Fiber Reinforced Epoxy Composite

Study on impact properties of carbon/kevlar fiber hybrid composites

Investigation of Dynamic Mechanical Behavior of Nanosilica Filled Carbon-Kevlar-Epoxy Polymer Hybrid Nanocomposite

Experimental investigation of the impact behavior of glass/epoxy composite materials with the natural fiber layer

Experimental investigations on the fatigue behavior of hybrid basalt/glass fiber epoxy composites

Influence of Long-Term Moisture Exposure and Temperature on the Mechanical Properties of Hybrid FRP Composite Specimens

Investigation of the Tensile Performance and Failure Mechanism of Carbon–aramid Hybrid Fibers/epoxy Sandwich Structure Laminates Using the UV-thermal Synergetic Curing Mechanism: Experimentation and Simulation

STUDY ON DAMPING PROPERTIES OF CF/KF HYBRID FIBERS COMPOSITES

Investigation of the energy absorption behavior and damage mechanisms of aramid/carbon/jute fiber hybrid epoxy composites

Mechanical and low velocity impact behaviour of intra-ply glass/kevlar fibre reinforced nano-silica and micro-rubber modified epoxy resin hybrid composite

An experimental study of weave pattern effect on the mechanical and dynamic behavior of composite laminates

Mechanical Characterization of Graphene-Hexagonal Boron Nitride-Based Kevlar-Carbon Hybrid Fabric Nanocomposites

Mechanical and quasi-static puncture behavior of hybrid glass/Kevlar/carbon fiber laminate composites with graphene nanoparticles