Abstract:Journal of Composite Materials, Ahead of Print. Detecting the low-velocity impact damage on the FRP composite structures can be challenging because the visible signs on the surface may be subtle. Mitigating the effects of BVID (Barely Visible Impact Damage) is crucial in ensuring the safety and reliability of composite components, especially in industries where these materials are commonly used, such as aerospace and automotive. This article explores the experimental investigations of the impact and post-impact damage propagation under compression in the Graphene Nano-Platelets (GNPs) infused glass fiber epoxy composite laminates. A comparative study of varying the percentage of the nano-platelets (0, 0.25, 0.5, and 0.75%) in the matrix material of the composite laminate is presented. The impact tests at low energies (15 J, 20 J, and 25 J), followed by the quasi-static compression tests, are carried out as per the procedures mentioned in the ASTM D7136/D7137. The digital image correlation technique (DIC) is used to measure strains and plot the strain field on the impacted face of the specimen under compression. Damage envelopes of the impact and compression tests are studied using X-ray CT scans. Micro-level failures are observed through Scanning Electron Microscopy (SEM) to get better insights into the failure mechanism of the composite materials under impact and compression loadings. Upon completing the study, it is found that the addition of the GNP into the matrix materials not only increased the impact performance but also increased the load-carrying capacity of the laminate under compressive loading. A decrement of 2–21% in the energy absorbed in the damage formation is seen with the incorporation of GNPs into composite materials. A maximum increment of 17% in the compressive strength is observed for the composite laminates with the 0.75% GNPs. However, for a particular percentage of the GNP, the compressive strength of the laminate is reduced with an increase in impact energy compared with its virgin counterpart. From X-ray CT scans, it is seen that the laminate under the compression tests fails due to excessive ply-splitting and the delamination at the damage site created during the impact. Fiber breakage, fiber brooming, matrix cracking, fiber-matrix debonding, etc., are some of the other failure modes observed in SEM studies.

Hybridization effect of Kevlar and glass fiber on carbon/epoxy composites to enhance the damage strength under low velocity impact. Part II: Numerical simulations

Enhanced damage tolerance and fracture toughness of lightweight carbon-Kevlar fiber hybrid laminate

Experimental and numerical response and failure of laterally impacted carbon/glass fibre-reinforced hybrid composite laminates

High‐velocity impact resistance and energy absorption behavior of Carbon‐Kevlar hybrid composite laminates

Effects of Carbon/Kevlar Hybrid Ply and Intercalation Sequence on Mechanical Properties and Damage Resistance of Composite Laminates under Quasi-Static Indentation

Numerical modeling and experimental validation of low velocity impact of woven GFRP/CFRP composites

A Computational Analysis of the High-velocity Impact Performance of Lightweight 3D Hybrid Composite Armors

Mechanical and low velocity impact behaviour of intra-ply glass/kevlar fibre reinforced nano-silica and micro-rubber modified epoxy resin hybrid composite

Experimental and numerical analysis of ballistic impat and material characterization of GFRP and Kevlar 29/epoxy composite laminate

The influence of the inter-ply hybridisation on the mechanical performance of composite laminates: Experimental and numerical analysis

Empirical and numerical analysis of damage tolerance in multifunctional hybrid sandwich fiber reinforced polymers composite structures for aerospace applications using compression after impact (CAI) testing

Low-velocity impact and compression-after-impact behaviors of twill woven carbon fiber/glass fiber hybrid composite laminates with flame retardant epoxy resin

Investigation on Layer Hybridization of Glass/Carbon Fibre Woven Reinforced Composites Subjected to Low-Speed Impact

Thickness effect on ballistic impact behavior of hybrid carbon/Kevlar composites

Post-Damage Compressive Strength of Woven Hybrid Composites Impacted with Various Energy Levels

Study on impact properties of carbon/kevlar fiber hybrid composites

Effect of Impactor velocity and boundary condition on low velocity impact finite element modelling of CFRP composite laminates

Drop-weight impact behaviour of woven hybrid basalt–carbon/epoxy composites

Low Velocity Impact Response of Carbon Fiber Composite Laminates with Surface Glass Fibers

Effect of graphene nano-platelets on the low-velocity-impact and compression-after-impact strength of the glass fiber epoxy composite laminates

Experimental and Numerical Analysis of Lightweight Hybrid Composites Under Low Velocity Impact