Abstract:The present investigation was conducted on the low-speed impact response of quasi-isotropic [±45/0/90°]xs hybrid composite through laboratory level experimental tests. The purpose was to understand the behaviour that the different stacking sequences of hybrid glass/carbon fibre composites has on the ability of the material to sustain loads during low-speed impact events without developing critical structural failure in the material and improving the impact energy absorption properties, which is a relevant matter in aerospace and automotive industries. Drop-weight impact tests were carried out on two different laminates, with different stacking sequences, each of which were 16 symmetric inter-ply hybrid laminates named GC [+45G/−45C/0G/90C]4s and, respectively, G-C [+45G/−45G/0G/90G/+45C/−45C/0C/90C]2s, where G stands for glass fibre and C for carbon fibre. Both were comprised of epoxy matrix reinforced carbon/E-glass fibre woven fabric composites. The outcome of changing the hybrid stacking sequence, on the impact performances, was discussed. The damage morphologies and local failure mechanisms were analysed using visual inspection and a high-resolution laser scanner. Under 33 J impact energy, both tested hybrid composites exhibited approximately 10 kN peak load. Nevertheless, one key parameter, the time to peak load, significantly changed; the damage initiation threshold for GC samples occurred immediately before 6 kN, whereas for G-C samples this threshold appeared much earlier. This type of behaviour was partly connected to the delay in the propagation of delamination and fibre breakage, which was influenced by the high elastic energy absorption of the carbon fibres when compared with the glass fibres. The absorbed energy was higher for GC configuration, whereas a higher DI was observed for samples G-C indicating that a high percentage of the total energy was dissipated through the propagation of in-plane and out-of-plane fibre/matrix cracks. No perforation was observed on either configuration; nevertheless, the damage area significantly changed both in size and appearance from one configuration to another.

Experimental and numerical response and failure of laterally impacted carbon/glass fibre-reinforced hybrid composite laminates

Investigation on Layer Hybridization of Glass/Carbon Fibre Woven Reinforced Composites Subjected to Low-Speed Impact

Numerical modeling and experimental validation of low velocity impact of woven GFRP/CFRP composites

Hybridization effect of Kevlar and glass fiber on carbon/epoxy composites to enhance the damage strength under low velocity impact. Part II: Numerical simulations

Finite element analysis of dynamic progressive failure properties of GLARE hybrid laminates under low-velocity impact

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Impact responses and residual flexural properties of narrow CFRP laminates

Low-velocity impact and compression-after-impact behaviors of twill woven carbon fiber/glass fiber hybrid composite laminates with flame retardant epoxy resin

In-plane compression response of woven CFRP composite after low-velocity impact: Modelling and experiment

Low Velocity Impact Response of Carbon Fiber Composite Laminates with Surface Glass Fibers

Failure Analysis of Carbon Fiber Reinforced Composite Subjected to Low Velocity Impact and Compression after Impact

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Research on low‐velocity impact resistance of carbon fiber composite laminates

Study of Low-Velocity Impact Behavior of Hybrid Fiber-Reinforced Metal Laminates

The influence of the inter-ply hybridisation on the mechanical performance of composite laminates: Experimental and numerical analysis

Failures of laminates under nonpenetrative impacts

Crushing responses of carbon/glass hybrid composite tubes under dynamic compressive loads

Post-Damage Compressive Strength of Woven Hybrid Composites Impacted with Various Energy Levels

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates

Drop-weight impact behaviour of woven hybrid basalt–carbon/epoxy composites

Crashworthiness and Failure Analyses of FRP Composite Tubes under Low Velocity Transverse Impact