Abstract:Impact properties of carbon/kevlar composites schematic diagram. In this article, carbon/kevlar hybrid composites were prepared using Vacuum Assisted Resin Infusion (VARI). The sandwich structure with plain carbon weave fabric as the core layer and plain kevlar weave fabric as the surface layer was selected as reinforcement and the solution of epoxy resin and curing agent was selected as matrix. The low velocity impact experiment and compression after impact (CAI) experiment were carried out on the samples at different hybrid ratio and different temperatures, and the mechanical response on the impact loads were analyzed respectively. The results show that the specimen can limit the delamination defect expansion of the surface kevlar fiber as the carbon fiber used as the core layer, which reduce the delamination defect area and improve the impact resistance of the sample. The toughness of the sample improves the brittle failure mode, that is, the sample still has a certain bearing capacity after the load exceeds the maximum strength, the sandwiched composites presents a positive hybrid effect. With the increase of temperature, the matrix was obviously softened, the macromolecular movement in the system was intensified, the three‐dimensional network macromolecular structure of the matrix and the fiber/matrix interface properties were damaged, and the mechanical properties showed an obvious downward trend. As far as the influences of hybrid ratio and temperature on impact behavior of composite are concerned, it lay a theoretical foundation for the industrial application of carbon/kevlar hybrid composites. Highlights The sandwiched structure was used to design the composites, which greatly improves the impact properties of the specimens. The impact properties and compression after impact properties at different hybrid ratios and different temperatures were studied. Based on the hybrid effect and temperature effect, the impact failure mechanism of the sample was analyzed.

Thickness effect on ballistic impact behavior of hybrid carbon/Kevlar composites

Hybridization Effects on Ballistic Impact Behavior of Carbon/ Aramid Fiber Reinforced Hybrid Composite

Study of Dynamic Impact Behaviors and Ballistic Properties of Hybrid Composites

High‐velocity impact resistance and energy absorption behavior of Carbon‐Kevlar hybrid composite laminates

Study on impact properties of carbon/kevlar fiber hybrid composites

Low-velocity Impact Damage Research on CFRPs with Kevlar-fiber Toughening

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

A Computational Analysis of the High-velocity Impact Performance of Lightweight 3D Hybrid Composite Armors

Hybrid Effects and Failure Mechanisms of Carbon/kevlar Fiber Composite Laminates under the Bending-after-impact Loading

Influence of Asymmetric Hybridization on Impact Response of 3D Orthogonal Woven Composites

Changes in Dynamic Mechanical Behavior of Carbon Fiber Reinforced Polymer Laminates under Multiple Low Energy Impacts

Investigations of the ballistic response of hybrid composite laminated structures

Hybridization effect of Kevlar and glass fiber on carbon/epoxy composites to enhance the damage strength under low velocity impact. Part II: Numerical simulations

Effects of Carbon/Kevlar Hybrid Ply and Intercalation Sequence on Mechanical Properties and Damage Resistance of Composite Laminates under Quasi-Static Indentation

Impact Response of Carbon/Kevlar Hybrid 3D Woven Composite under High Velocity Impact: Experimental and Numerical Study

Low-velocity impact and static behaviors of high-resilience thermal-bonding inter/intra-ply hybrid composites

Numerical Simulation of the Effect of Projectile Shape and Size on the High-Velocity Impact of Carbon Fiber Reinforced Composite Laminates

Investigations on Low-Velocity Ballistic Impact behaviour of Kevlar / Epoxy Composites Reinforced with Chopped Wet Spun Fibers Intruded with Nanofillers

Enhanced damage tolerance and fracture toughness of lightweight carbon-Kevlar fiber hybrid laminate

Experiment Study of Basalt Fiber/steel Hybrid Laminates under High-Velocity Impact Performance by Projectiles

The Effect of STF-Kevlar Composite Materials on the Impact Response of Fibre Metal Laminates