Abstract:This paper presents experimental results on the behavior of a class of glass fiber composites under low velocity impacts, in order to analyze their usage in designing low velocity impact-resistant components in car and marine industries. Also, a finite element model at the meso level (considering yarn as a compact, homogenous and isotropic material) was run with the help of Ansys Explicit Dynamics in order to point out the stages of the failure and the equivalent stress distribution on the main yarns in different layers of the composite. The composites were manufactured at laboratory scale via the laying-up and pressing method, using a quadriaxial glass fiber fabric (0°/+45°/90°/-45°) supplied by Castro Composites (Pontevedra, Spain) and an epoxy resin. The resin was a two-component resin (Biresin® CR82 and hardener CH80-2) supplied by Sika Group (Bludenz, Austria). The mass ratio for the fabric and panel was kept in the range of 0.70-0.77. The variables for this research were as follows: the number of layers of glass fiber fabric, the impact velocity (2-4 m/s, corresponding to an impact energy of 11-45 J, respectively) and the diameter of the hemispherical impactor (Φ10 mm and Φ20 mm) made of hardened steel. The tests were performed on an Instron CEAST 9340 test machine, and at least three tests with close results are presented. We investigated the influence of the test parameters on the maximum force (Fmax) measured during impact, the time to Fmax and the duration of impact, tf, all considered when the force is falling to zero again. Scanning electron microscopy and photography were used for discussing the failure processes at the fiber (micro) and panel (macro) level. At a velocity impact of 2 m/s (corresponding to an impact energy of 11 J), even the thinner panels (with two layers of quadriaxial glass fiber fabric, 1.64 mm thickness and a surface density of 3.51 kg/m2) had only partial penetration (damages on the panel face, without damage on panel back), but at a velocity impact of 4 m/s (corresponding to an impact energy of 45 J), only composite panels with six layers of quadriaxial fabric (5.25 mm thickness and a surface density of 9.89 kg/m2) presented back faces with only micro-exfoliated spots of the matrix for tests with both impactors. These results encourage the continuation of research on actual components for car and naval industries subjected to low velocity impacts.

Experimental investigation of the impact behavior of glass/epoxy composite materials with the natural fiber layer

Low velocity impact response of sandwich composites with hybrid glass/natural fiber face-sheet and PET foam core

Low-speed impact behavior of fiber-reinforced polymer-based glass, carbon, and glass/carbon hybrid composites

The Behavior of Glass Fiber Composites under Low Velocity Impacts

Cyclic Relaxation, Impact Properties and Fracture Toughness of Carbon and Glass Fiber Reinforced Composite Laminates

Low-Velocity Impact Response on Glass Fiber Reinforced 3D Integrated Woven Spacer Sandwich Composites

Experimental and Numerical Investigation of the Geometrical Effect on Low Velocity Impact Behavior for Curved Composites with a Rubber Interlayer

Investigation of the Impact Response of Plain Weave E-Glass Composite Structure Based on the EN ISO 178 Standard

Experimental and numerical behaviors of GFRP laminates under low velocity impact

Enhancement of Impact, Shear and Wear Performance of Glass Fiber/Epoxy Composites by Inclusion of Polycarbonate Sheets

An experimental study of weave pattern effect on the mechanical and dynamic behavior of composite laminates

Mechanical and low velocity impact behaviour of intra-ply glass/kevlar fibre reinforced nano-silica and micro-rubber modified epoxy resin hybrid composite

Impact Behavior Analysis of Luffa/Epoxy Composites Under Low-Velocity Loading

Low-velocity impact and compression-after-impact behaviors of twill woven carbon fiber/glass fiber hybrid composite laminates with flame retardant epoxy resin

Low-velocity impact and quasi-static post-impact compression analysis of woven structural composites for automotive: Influence of fibre types and architectural structures

Experimental Evaluation of Low Velocity Impact Properties and Damage Progression on Bamboo/Glass Hybrid Composites Subjected to Different Impact Energy Levels

Investigation of the energy absorption behavior and damage mechanisms of aramid/carbon/jute fiber hybrid epoxy composites

A comprehensive study of low-velocity impact behavior and damage evaluation of angle-ply thin woven GFRP composites under various temperatures

Investigation of the mechanical response of laminated composites reinforced with different type wire mesh

Implementation and Characterization of a Laminate Hybrid Composite Based on Palm Tree and Glass Fibers

Post-Damage Compressive Strength of Woven Hybrid Composites Impacted with Various Energy Levels