Abstract:Belite sulfoaluminate (BSA) cements have been proposed as environmentally friendly building materials, as their production may release up to 35% less CO(2) into the atmosphere when compared with ordinary Portland cement fabrication. However, their formation mechanism has not been studied in detail so far. Here, an in situ high-temperature high-resolution synchrotron X-ray powder diffraction study is reported. Two types of BSA clinkers have been characterized, both containing 50-60 wt% C(2)S and 20-30 wt% C(4)A(3)\underline{\rm S} as main phases. One type is iron-rich and a second type (with different phase assemblage) is aluminium-rich. Furthermore, the C(2)S phase reacts slowly with water, thus activation of this compound is desirable in order to enhance the mechanical strength development of the resulting cements. To do so, iron-rich BSA clinkers have been doped with minor amounts of B(2)O(3) and Na(2)O to promote stabilization of α-forms of C(2)S, which are more reactive with water. The decarbonated raw materials were loaded into Pt tubes and heated to between 973 K and 1673 K, and patterns were collected using a high-energy synchrotron beam of wavelength λ = 0.30 Å. The thermal stability of Klein's salt in these clinkers has been clarified. Several reactions have been followed: formation and decomposition of Klein's salt, melting of aluminates and ferrite, and polymorphic transformations of dicalcium silicate: alpha'H-C2S → α-C(2)S. Changes in mineralogical phase assemblages at a given temperature owing to the addition of minor amounts of selected elements have also been determined.

Microstructural characteristics of belite–sulfoaluminate cement clinkers with bottom ash

The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite

Low-Temperature Calcination of Belite-Calcium Sulphoaluminate Cement Clinker and the Hydration Process

The performance of α′-belite calcium sulfoaluminate (C$A) cement preserved under SO 2 atmosphere compared to commercial products

Solutionizing of Additional Ions in Belite-Rich Clinkers and the Properties of the Resulting Cement

In situ powder diffraction study of belite sulfoaluminate clinkering

The effect of the combined addition of copper, lithium and sulphur on the formation of Portland cement clinker

Ferritic calcium sulfoaluminate belite cement from metallurgical industry residues and phosphogypsum: Clinker production, scale-up, and microstructural characterisation

Synthesis of high belite sulfoaluminate cement with high volume of mixed solid wastes

Performance of preserved alpha prime belite phase within belite-ye'elimite-ferrite clinker

Preparation of belite-sulfoaluminate cement with phosphate-rock acid-insoluble residue: Modification and influence of impurity ions on cement properties

Belite-Rich Cement - A more Environmentally Friendly Alternative to Ordinary Portland Cement

Preparation and Hydration of Brownmillerite-Belite-Sulfoaluminate Cement

Effect of strontium slag on early hydration and mechanical properties of belite-C4A3$ cement

Properties of bauxite-mullite castables and corrosion resistance to cement clinker

Hydrated Properties and Mineralogical Composition of Sulphoaluminate Cement Clinker Made from Red Mud

Synthesis of alite, belite and ferrite in both monophase and polyphase states and their hydration behavior

Synthesis and Characterization of Belite Calcium Sulfoaluminate Cements Produced by Oxyfuel Combustion Residues

Active iron-rich belite sulfoaluminate cements: clinkering and hydration

Thermochemical behavior of several common salts blended with cement raw material

Effect of Tio2 on the Formation of Clinker with High C3s