Abstract:The use of equivalent circuit is an effective method to investigate the measured dielectric response data. The equivalent circuit represents the measured dielectric response data using discrete electrical components representing relaxation and conductivity processes. There are five types of electrical components that can be inserted in an equivalent circuit: 1) a loss peak component;2) a quasi-dc component (QDC);3) a charge diffusion component;4) a frequency independent capacitance component;5) a dc conductivity component. The types of electrical components and their electrical connections in the circuit (in series or in parallel) should be determined by a comprehensive consideration of the actual physical meaning of the microscopic structure of the dielectric and the actual measurement condition. In calculating the specific parameters of the equivalent circuit, it is necessary to consider simultaneously the real and imaginary parts of the complex capacitance. For a given dielectric material, different measurement conditions, such as electrode configuration, measurement temperature, etc, can change the measured dielectric response and hence alter the corresponding equivalent circuit used for the data fitting. The rationale for using a particular equivalent circuit should be determined from both physical and mathematical point of view. Electrical components without clear physical meaning should not be inserted in the equivalent circuit only for the purpose of improving the accuracy of the fit. The equivalent circuit method represents a quantitative analysis of the dielectric response and provides a basis for theoretical understanding of the factors influencing the response: external conditions, microscopic structure of dielectric, etc. The dielectric response of HTV silicone rubber and epoxy resin are analyzed using equivalent circuits. The method of constructing the equivalent circuits and the rationale for using specific components in the circuits are explained in detail. Some issues related to the application of the equivalent circuit method are outlined.

Method of measuring dielectric constant using an oscilloscope

Analysis of Conductor Loss in Interdigital Capacitor Based Measurement of Dielectric Constant of Ferroelectric Thin Film

Nondestructive method of thin film dielectric constant measurements by two-wire capacitor

Development of a Sensor for Dielectric Constant Measurements Utilizing Time-Domain Measurement with a Vector Network Analyzer

Determination of Dielectric Constants through Capacitor Measurement Using Variations in Thickness, Area, Materials, and Density

Measurement of Dielectric Constant of Thin Film Materials at Microwave Frequencies

Local Permittivity Measurement of Dielectric Materials Based on the Non-Contact Force Curve of Microwave Atomic Force Microscopy

Evaluation of the Capacitances by Using High Frequency Roll-Off Fitting to the Second Order Approximation

Application and Significance of the Equivalent Circuit Method in the Analysis of Dielectric Response

Evaluation of Local Dielectric Constant of Biomaterial Based on the Force-distance-curve Measured by Microwave Atomic-force Microscope

The Relationship Between Electrical Capacitance-Based Dielectric Constant and Soil Water Content

Capacitive-Coupling Impedance Spectroscopy Using a Non-Sinusoidal Oscillator and Discrete-Time Fourier Transform: An Introductory Study

Development of a flat cutoff probe covered with a dielectric layer for non-invasive plasma diagnostics

A free-space method for measurement of dielectric constants and loss tangents at microwave frequencies

Development and construction of a cost-effective non-contact instrument for measuring the dielectric constant of liquids

Dielectric spectroscopy of ferroelectric nematic liquid crystals: Measuring the capacitance of insulating interfacial layers

Dielectric constant measurement of liquids using nanosecond-pulsed signals

Extrinsic and Intrinsic Frequency Dispersion of High-k Materials in Capacitance-Voltage Measurements

Determine the Permittivity of the Plastic Materials

Evaluation of the Dielectric by Measuring Leakage Currents on Self-Built Capacitor-Like Devices

A Simple Method to Measure DC Electric Field with Space Charges