Abstract:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Ahead of Print. Wear is a significant cause of material loss, contributing to surface degradation of crucial components, notably within engineering sectors. This article is dedicated to enhancing tribological properties through the implementation of Al2O3-based ceramic coatings, specifically targeting situations where reciprocating sliding wear predominates. This study introduces lanthanum oxide (La2O3), a rare earth oxide, as a reinforcing material in Al2O3 coatings in varying weight percentages of 1.2%, 1.6%, and 1.8% respectively along with 3% hexagonal boron nitride (h-BN). The coatings were developed by the high-velocity oxy-fuel (HVOF) surface modification technique, with SS304 serving as the substrate. The porosity, hardness, and chemical composition of the developed coatings were examined. Additionally, reciprocating tribological testing of the coatings was conducted at two loads (5 N and 15 N) under dry sliding conditions. Results indicated that coating containing 95.4% Al2O3–3% h-BN–1.6% La2O3 reduced the porosity up to 50% and improved hardness by 46% compared to the 97% Al2O3–3% h-BN coating. The formation of the α-Al2O3 phase leads to an increase in coating hardness and a reduction in porosity. Notably, the coating comprising 97% Al2O3–3% h-BN exhibited the lowest coefficient of friction among all developed coatings under both loads. Furthermore, an increase in load led to a decrease in the coefficient of friction for all developed coatings. Furthermore, the addition of La2O3 (1.6 wt%) to the coating with 3 wt% h-BN exhibited the lowest wear at both loads. The findings also revealed increased wear at high loads for all developed coatings. SEM, EDS, and XRD analysis of the worn surfaces revealed the contribution of h-BN and La2O3 in enhancing friction behavior through the formation of oxides such as α-Al2O3, B2O3, Al8B2O15, and Al11La0.497O17, along with alterations in wear mechanism and the size of wear debris. The composite coatings developed in this study shall be helpful in advanced engineering applications.

Effect of nano h-BN particles on growth regularity and tribological behavior of PEO composite ceramic coating of ZL109 alloy

Enhanced tribological performance of TiO 2 -hBN/CNT double-layer coating by CNT-assisted plasma electrolytic oxidation with nanoparticles addition

Enhanced Tribological Performance of TiO2-hBN/CNT Double-Layer Coating by CNT-Assisted Plasma Electrolytic Oxidation with Nanoparticles Addition

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

EFFECT OF NANO-PARTICLE CONTENT ON TRIBOLOGICAL PROPERTIES OF ELECTRO-BRUSH PLATED COMPOSITE COATING IN OIL CONTAINING ABRASIVE CONTAMINANT

Effect of Particle Morphology on Microstructure and Properties of AlSi/BN Coating

TiO 2 -hBN nanocomposite coating with excellent wear and corrosion resistance on Ti6Al4V alloy prepared by plasma electrolytic oxidation

Influence of CePO4 on High Temperature Anti-Friction and Anti-Wear Behaviors of Nickel-Based H-Bn Composite Coatings

Investigation of the Tribological and Mechanical Properties of Electroless Ni-P-hBN Nano-Composite Coating

TiO2-hBN Nanocomposite Coating with Excellent Wear and Corrosion Resistance on Ti6Al4V Alloy Prepared by Plasma Electrolytic Oxidation

Effect of h-BN nanoparticles incorporation on the anti-corrosion and anti-wear properties of micro-arc oxidation coatings on 2024 aluminum alloy

Effect of Hbn Content on the Friction and Wear Characteristics of B4C–hBN Ceramic Composites under Dry Sliding Condition

Effect of Component Particle Size on Microstructure and Properties of AlSi Coated BN Coatings

Tribological behaviour of Ag–BN coatings prepared by plasma spraying

Enhancing Tribological Performance of Micro-Arc Oxidation Coatings on 6061 Aluminum Alloy with h-BN Incorporation

Tribological Behavior and Lubrication Mechanism of H-Bn/ceramic Composites: Effects of H-Bn Platelet Size and Ceramic Phase

Synergism of h-BN and La2O3 in improving the tribological performance of Al2O3 coatings

Mechanical Properties and Plasma Erosion Resistance of BNp/Al2O3-SiO2 Composite Ceramics

MICROSTRUCTURE, MECHANICAL PROPERTIES AND FRICTION/WEAR BEHAVIOR OF HOT-PRESSED Si₃N₄/ BN CERAMIC COMPOSITES

High-temperature oxidation and wear resistance of nano-ZrB 2 reinforced CoNiCrAlY composite coating via a step-fashion mechanical alloying powder process

Microstructure and tribological properties of laser cladded self-lubricating nickel-base composite coatings containing nano-Cu and h-BN solid lubricants