Abstract:A comprehensive modeling framework for the thermoforming of polymer matrix woven laminate composite was developed. Two numerical indicators, the slip path length and traction magnitude, have been identified to be positively correlated to matrix smearing and wrinkling defects. The material model has been calibrated with picture-frame experimental results, and the prediction accuracy for intra-ply shear and thickness distribution was examined with measurements of the physically formed parts. Specifically, thickness prediction for most locations on the formed parts was accurate within an 11.6% error margin. However, at two points with significant intra-ply shear, the prediction errors increased to around 20%. Finally, a parametric study was conducted to determine the relationship between various process parameters and the quality of the formed part. For the trapezoidal part, orienting the laminate at 45 degrees to the mold axis reduces the likelihood of matrix smear and wrinkling defects. Although this laminate orientation yielded a greater spatial variation in part thickness, the thickness deviation is lower than that for the 0-degree orientation case. Two forming analyses were conducted with ramp rates of 25 mm/s and 80 mm/s to match the equipment's operational limits. It was observed that higher forming rates led to a greater likelihood of defects, as evidenced by a 15% and 10% increase in the formed part areas with longer slip paths and higher traction magnitudes, respectively. It was discovered that shallower molds benefit from faster ramp rates, while deeper molds require slower rates to manage extensive shearing, stretching and bending. Faster forming rates lead to smaller thickness increases at high intra-ply shear regions, indicating a shift from intra-ply shear to out-of-plane bending due to the visco-plastic effect of the molten laminate and can negatively impact part quality. Lastly, it was shown that a well-conceived strategy using darts could improve the part quality by reducing the magnitude of the defect indicators.

Forming Simulation of Thick AFP Laminates and Comparison with Live CT Imaging

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

An Analytical Model for Pressure Distribution in Automated Fiber Placement on Irregular Surfaces and Its Application in Aeronautical Manufacturing

As-built FE Thermal Analysis for Complex Curved Structures in Automated Fiber Placement

Modelling the effect of gaps and overlaps in automated fibre placement (AFP)-manufactured laminates

Influence of compaction and curing in the Automated Fiber Placement Process on the mechanical performance of composite laminates

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

Validation of shape change predictions for stamp forming of carbon fiber thermoplastic composite laminates

Experimental and numerical study on the tensile failure behavior of toughened-interlayer composite laminates with automated fiber placement (AFP) induced gap and overlap defects

Towards 3D Process Simulation for In Situ Hybridization of Fiber-Metal-Laminates (FML)

Modelling the Effect of Process Conditions on Steering-Induced Defects in Automated Fibre Placement (AFP)

Modeling the effect of automated fiber placement induced gaps based on serial layer scanned point clouds

An Investigation into the Forming of Fiber Metal Laminates with Different Thickness Metal Skins Using Hydromechanical Deep Drawing

Multiscale numerical modeling of large-format additive manufacturing processes using carbon fiber reinforced polymer for digital twin applications

A Modeling Framework for the Thermoforming of Carbon Fiber Reinforced Thermoplastic Composites

Online Monitoring and Prediction of Thermo-Mechanics of AFP Based Thermoplastic Composites

A Lamination Model for Forming Simulation of Woven Fabric Reinforced Thermoplastic Prepregs

Simulation of Warpage and Mold Flow in the LFT-D Process

Investigation into the Fiber Orientation Effect on the Formability of GLARE Materials in the Stamp Forming Process

A novel 3D laser scanning defect detection and measurement approach for automated fibre placement

Numerical simulation at the micro-scale for the heat transfer modelling in the thermoplastic composites laser-assisted AFP process