Abstract:Additive manufacturing (AM) is known to generate large magnitudes of residual stresses (RS) within builds due to steep and localized thermal gradients. In the current state of commercial AM technology, manufacturers generally perform heat treatments in effort to reduce the generated RS and its detrimental effects on part distortion and in-service failure. Computational models that effectively simulate the deposition process can provide valuable insights to improve RS distributions. Accordingly, it is common to employ Computational fluid dynamics (CFD) models or finite element (FE) models. While CFD can predict geometric and thermal-fluid behavior, it cannot predict the structural response (e.g., stress–strain) behavior. On the other hand, an FE model can predict mechanical behavior, but it lacks the ability to predict geometric and fluid behavior. Thus, an effectively integrated thermofluidic-thermomechanical modeling framework that exploits the benefits of both techniques while avoiding their respective limitations can offer valuable predictive capability for AM processes. In contrast to previously published efforts, the work herein describes a one-way coupled CFD-FEA framework that abandons major simplifying assumptions, such as geometric steady-state conditions, the absence of material plasticity, and the lack of detailed RS evolution/accumulation during deposition, as well as insufficient validation of results. The presented framework is demonstrated for a directed energy deposition (DED) process, and experiments are performed to validate the predicted geometry and RS profile. Both single- and double-layer stainless steel 316L builds are considered. Geometric data is acquired via 3D optical surface scans and X-ray micro-computed tomography, and residual stress is measured using neutron diffraction (ND). Comparisons between the simulations and measurements reveal that the described CFD-FEA framework is effective in capturing the coupled thermomechanical and thermofluidic behaviors of the DED process. The methodology presented is extensible to other metal AM processes, including power bed fusion and wire-feed-based AM.

Multiscale numerical modeling of large-format additive manufacturing processes using carbon fiber reinforced polymer for digital twin applications

Integrated computational modeling of large format additive manufacturing: Developing a digital twin for material extrusion with carbon fiber-reinforced acrylonitrile butadiene styrene

A Virtual Scale Approach to Multi-Scale Calculations and Its Application in Fiber-Reinforced Composites

A multiscale analysis approach to predict mechanical properties in fused deposition modeling parts

Finite Element Analysis of Additive Manufacturing Based on Fused Deposition Modeling: Distortions Prediction and Comparison With Experimental Data

Process-dependent Multiscale Modeling for 3D Printing of Continuous Fiber-reinforced Composites

Predicting Material Properties of Additively Manufactured Acrylonitrile Butadiene Styrene via a Multiscale Analysis Process

Multi-scale Analysis for 3D Printed Continuous Fiber Reinforced Thermoplastic Composites

Process-Structure Coupled Simulation of Additive Manufactured Components

On the effectiveness of deep material networks for the multi-scale virtual characterization of short fiber-reinforced thermoplastics under highly nonlinear load cases

Temporally continuous thermofluidic-thermomechanical modeling framework for metal additive manufacturing

A Coupled FEM-FFT Concurrent Multiscale Method for the Deformation Simulation of CFRPs Laminate

Additive Manufacturing of Composite Polymers: Thermomechanical FEA and Experimental Study

Multiscale Computational Modeling of 3D Printed Continuous Fiber-Reinforced Composites

LS-DYNA Machine Learning-based Multiscale Method for Nonlinear Modeling of Short Fiber-Reinforced Composites

Multiscale concurrent design and 3D printing of continuous fiber reinforced thermoplastic composites with optimized fiber trajectory and topological structure

Multiscale Simulation and Prediction of Mechanical Properties for Carbon Fiber Reinforced Polymer Orthotropic Laminate

Concurrent modeling of porosity and microstructure in multilayer three-dimensional simulations of powder-bed fusion additive manufacturing of INCONEL 718

A Multiscale Model for Efficiently Simulating Laser Powder Bed Fusion Process with Detailed Microstructure and Mechanical Performance Results

Multiscale Experiments and Predictive Modelling for Inverse Design and Failure Mitigation in Additively Manufactured Lattices

Controllable Three-Dimensional Thermal Field for Enhancing Tensile Strength of Additive Manufactured Continuous Fiber Reinforced Composites: Modeling, Simulation, and Experiment