Abstract:This study proposes a high-speed (∼500 Hz), non-intrusive ultrasonic-based temperature measurement method and investigate its performance characteristics by conducting a static behavior measurement at ambient temperature and a dynamic behavior measurement from ambient temperature to 700 °C. In the ambient-temperature experiment, the optimal design of the ultrasonic wave propagation tube is verified by comparing the collected signal intensities. The high repeatability of the ultrasonic wave measurement method is verified with Pearson correlation coefficients of over 99.96 % among the received raw ultrasonic wave signals for every 0.002 s. In the dynamic high-temperature experiment, the measurement accuracy is validated by comparing the temperature deviation from the thermocouple temperature. In the fast-rising low-temperature region around 25–100 °C, a high error rate (>100 %) is obtained; therefore, a signal-denoising algorithm and four candidates of post-processing equations are applied to improve the ultrasonic wave thermometry accuracy. In the four candidate equations, the optimal post-processing method is determined to be the one that yields a linear fitting with slope and intercept obtained in Kelvin temperature. The accuracy of ultrasonic wave thermometry is verified with the time-weighted average and standard deviation of error rates being 1.09 % and 1.10 %, respectively, significantly lower than those of typical commercial thermocouples . As ultrasonic wave thermometry can only perform line-integral measurement and not point measurement, it can be effective for anomaly detection of steady operating systems like gas turbines and boilers for power generation. Thus, fast-responsive, line-integral ultrasonic wave thermometry can be a diagnostic tool to reduce the risk of combustion instability accidents or other problems caused by rapid temperature change.

Study of ultrasonic thermometry based on ultrasonic time-of-flight measurement

Study on the High Precision Acoustic Measurement Techniques for Determining Temperature Field Around Seafloor Hydrothermal Vent

Water Temperature Reconstruction Via Station Position Correction Method Based on Coastal Acoustic Tomography Systems.

Study on the acoustic in-situ measurement techniques for determining temperature field around seafloor hydrothermal vents taking into account the refraction compensation of sound waves

A Model-Based Transit-Time Ultrasonic Gas Flowrate Measurement Method

Research on key technology of ultrasonic temperature measuring instrument in high-temperature solid structure

Experimental investigation on the measurement performance of high-speed ultrasonic wave thermometry in ambient- and high-temperature environments

Distance Measurement Via Ultrasonic

Double Threshold Ultrasonic Distance Measurement Technique and Its Application

Similarity Judgment-Based Double-Threshold Method for Time-of-Flight Determination in an Ultrasonic Gas Flowmeter

Ex Vivo Estimation of Temperature Combined with Pyroelectric Effect and Ultrasound Attenuation

Design of an Ultrasonic Transducer for Measuring Transient High Temperature

An accurate ultrasonic wind speed and direction measuring method by combining time-difference and phase-difference measurement using coded pulses combination

A Feasibility Study of Temperature Rise Measurement in A Tissue Phantom As an Alternative Way for Characterization of the Therapeutic High Intensity Focused Ultrasonic Field

A Novel Ultrasonic Transducer Module with an Own Reference Sound Channel for Flow Measurement

Noncontact Measurement of Internal Temperature Distribution in a Solid Material Using Ultrasonic Computed Tomography

Thermostatic Hyperthermia with Non-invasive Temperature Monitoring through Speed of Sound Imaging

A Novel Reconstruction Method for Temperature Distribution Measurement Based on Ultrasonic Tomography

Development of an Accurate and Robust Air-Coupled Ultrasonic Time-of-Flight Measurement Technique

Ultrasonic thermometric measurement system for solid rocket combustion chambers

Noninvasive Measurement of Internal Temperature Distribution Using Ultrasonic Computed Tomography.