Abstract:A novel process route using tape casting and stacking for fabricating porous scaffold of solid oxide fuel cells (SOFC) was demonstrated. The linear shrinkages of anode (Ni-YSZ, YSZ stands for 3%Y2O3 (mole fraction) stabilized ZrO2) and cathode (LSM-YSZ, LSM stands for La0.8Sr0.2MnO3) were optimized to be uniform with that of electrolyte during sintering, by controlling the content of pore former. The micromorphology and interface microstructure of the cross-section of the porous scaffold were observed by optical microscope and scanning electron microscope, respectively. The element distribution and phase composition were analyzed by energy dispersive spectrometer and X-ray diffraction, respectively. The results showed that the porous scaffold with regular pore shape and high specific surface area was obtained after sintering at 1 350 ℃. The fabricated porous scaffold had defect free interfacial structures due to the uniform shrinkage of anode, cathode and electrolyte layers. In addition, it was shown that diffusions of Zr, Ni and La caused a progressive boundary between YSZ, Ni-YSZ and LSM-YSZ layers. The interface between anode and electrolyte (Ni-YSZ/YSZ) was mainly composed of Ni, YSZ and a small amount of NiO, and the interface between cathode and electrolyte (LSM-YSZ/YSZ) was mainly composed of YSZ, LSM and a small amount of La2Zr2O7.

Preparation of Anode-Supported SOFC Electrolyte Membrane and Porous Anode Material

A simple and easy one-step fabrication of thin BaZr0.1Ce0.7Y0.2O3−δ electrolyte membrane for solid oxide fuel cells

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

Study on YSZ Membrane Electrolyte Fuel Cells Supported on Anode by Double-Layer Dry Pressing Method

Effect of Composite Pore-Former on the Fabrication and Performance of Anode-Supported Membranes for SOFCs

Preparation and SEM of Ni/Ce-YSZ Anode Materials

Fabrication and Performance of Anode-Supported Electrolyte Thin Films SOFCs

A Rapid Preparation of Acicular Ni Impregnated Anode with Enhanced Conductivity and Operational Stability

NiO+YSZ Anode Substrate for Screen-Printing Fabrication of YSZ Electrolyte Film in Solid Oxide Fuel Cell

Effects of Pore-Forming Agent on Characterization of NiO/YSZ Porous Anode for SOFC

Application of Yttria Stabilized Zirconia (8YSZ) and NiO Precursors for Fabrication of Composite Material for Anode-Supported SOFCs

Graded Ni–YSZ Anode Coatings for Solid Oxide Fuel Cell Prepared by EB-PVD

Performance and Optimization of Ni/3 Mol% Y2O3-ZrO2 Anode Supported SOFC

Fabrication and Interfacial Structure of Ni-YSZ-LSM Porous Scaffold for Solid Oxide Fuel Cells

Preparation of Ni/Ysz Materials for Sofc Anodes by Buffer-Solution Method

Anode-supported Solid Oxide Fuel Cell Based on Dense Electrolyte Membrane Fabricated by Filter-Coating

Preparation and Performance of Tri-layer Composite Anode Supported Fuel Cell

Preparation And Properties Of Nio-Coated Ysz Anodes For Solid Oxide Fuel Cells

Preparation of NiO–YSZ composite powder by a combustion method and its application for cathode of SOEC

Preparation of YSZ Film by EPD and Its Application in SOFCs

Preparation of Ni/Ysz Anode Material Using Gel-Tape Casting and Performance Analysis