Abstract:In this study, the effects of calcination and milling of 8YSZ (8 mol% yttria stabilized zirconia) used in the nickel-YSZ anode on the performance of anode supported tubular fuel cells were investigated. For this purpose, two different types of cells were prepared based on a Ni-YSZ/YSZ/Nd2NiO4+δ-YSZ configuration. For the anode preparation, a suspension was prepared by mixing NiO and YSZ in a ratio of 65:35 wt% (Ni:YSZ 50:50 vol.%) with 30 vol.% graphite as the pore former. As received Tosoh YSZ or its calcined form (heated at 1500 °C for 3 hours) was used in the anode support as the YSZ source. Electrochemical results showed that optimization of the fuel electrode microstructure is essential for the optimal distribution of gas within the support of the cell, especially under electrolysis operation where the performance for an optimized cell (calcined YSZ) was enhanced by a factor of two. In comparison with a standard cell (containing as received YSZ), at 1.5 V and 800 °C the measured current density was -1380 mA cm(-2) and -690 mA cm(-2) for the cells containing calcined and as received YSZ, respectively. The present study suggests that the anode porosity for improved cell performance under SOEC is more critical than SOFC mode due to more complex gas diffusion under electrolysis mode where large amount of steam needs to be transfered into the cell.

Preparation And Properties Of Nio-Coated Ysz Anodes For Solid Oxide Fuel Cells

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

Preparation of NiO–YSZ composite powder by a combustion method and its application for cathode of SOEC

Preparation of Ni/Ysz Materials for Sofc Anodes by Buffer-Solution Method

Preparation of Ni/Ysz Anode Material Using Gel-Tape Casting and Performance Analysis

Preparation and Performance of Tri-layer Composite Anode Supported Fuel Cell

Application of Yttria Stabilized Zirconia (8YSZ) and NiO Precursors for Fabrication of Composite Material for Anode-Supported SOFCs

Preparation of Ni/YSZ for SOFC Anodes by Buffer-Solution Method

Application of 8YSZ Nanopowder Synthesized by the Modified Solvothermal Process for Anode Supported Solid Oxide Fuel Cells

Preparation Of Nanosized Nio-Ysz Composite Powders By Situ-Precipitation Method

Preparation of Pr0.35Nd0.35Sr0.3MnO3−δ/YSZ Composite Cathode Powders for Tubular Solid Oxide Fuel Cells by Microwave-Induced Monomer Gelation and Gel Combustion Synthesis Process

Preparation of Ni–YSZ Cermet through Reduction of NiO–YSZ Ceramic for SOFC Anode

Tailoring the Microstructure of a Solid Oxide Fuel Cell Anode Support by Calcination and Milling of YSZ

Performance and Optimization of Ni/3 Mol% Y2O3-ZrO2 Anode Supported SOFC

Fabrication and Performance of Pr-doped CeO2 Nanorods-Impregnated Sr-doped LaMnO3–Y2O3-stabilized ZrO2 Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

An anode-supported hollow fiber solid oxide fuel cell with (Pr0.5Nd0.5)0.7Sr0.3MnO3-δ-YSZ composite cathode

A Novel Method for Preparing Anode Cermets for Solid Oxide Fuel Cells

Pd-YSZ composite cathodes for oxygen reduction reaction of intermediate-temperature solid oxide fuel cells

Porous NiO–YSZ and Ni–YSZ composites fabricated using NiO–YSZ composite nanopowders and WO3 additive

Preparation of Anode-Supported SOFC Electrolyte Membrane and Porous Anode Material

Preparation and SEM of Ni/Ce-YSZ Anode Materials