Abstract:Yttria-stabilized zirconia (YSZ)-based symmetrical solid oxide fuel cells (SSOFCs) are among the most attention-grabbing research directions to accelerate commercialization of SOFCs due to the great advantages in reducing material and fabrication cost, improving thermomechanical compatibility between components, and enhancing the ability of coking tolerance or sulfur poisoning, but they suffer from low output performance. Here we present a new nanoengineering electrode strategy of PrOx nano-catalyst infiltrated Pr0.6Sr0.4FeO3-δ (PrOx-PSF) for YSZ-based SSOFCs operating at intermediate temperature and achieving superior output performance. After infiltration, PrOx nanoparticles uniformly distributed on the porous PSF perovskite electrode which confirmed by TEM. The infiltrated symmetrical cell PrOx-PSF|YSZ|PSF-PrOx exhibits very low polarization resistance (Rp) of 0.053 Ω.cm2 and 0.113 Ω.cm2 at 800 °C in air and humidified hydrogen, respectively. Integration of nanoengineering electrode into state-of-the-art electrolyte-supported single cell achieves superior output performance of 741, 601, 486, and 250 mW.cm-2 at 800, 750, 700, and 650 °C, respectively. It is because nanoengineered PrOx infiltrated PSF shows the highest catalytic activity for both oxygen reduction reaction (ORR) and hydrogen oxidation reaction (HOR). Moreover, the single-cell shows long-term stability without performance degradation at intermediate temperatures (700 °C) on YSZ electrolyte without any buffer layer at constant 0.7 V applied voltage. Therefore, the novel PrOx-PSF nanostructured electrode can greatly promote the output performance of symmetrical SOFCs.

An anode-supported hollow fiber solid oxide fuel cell with (Pr0.5Nd0.5)0.7Sr0.3MnO3-δ-YSZ composite cathode

YSZ Thin Films Prepared by a Novel Powder Coating Process on Porous NiO-YSZ Cermet

Micro-Tubular Solid Oxide Fuel Cell with Asymmetric Structure Anode and La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode

An Anode-Supported Micro-Tubular Solid Oxide Fuel Cell with Redox Stable Composite Cathode

Scandia-stabilized Zirconia-Impregnated (la, Sr)MnO 3 Cathode for Tubular Solid Oxide Fuel Cells

A Novel U-Shaped Anode-Supported Hollow Fiber Solid Oxide Fuel Cell with Considerable Thermal Cycling Performance and Stability

Preparation of Pr0.35Nd0.35Sr0.3MnO3−δ/YSZ Composite Cathode Powders for Tubular Solid Oxide Fuel Cells by Microwave-Induced Monomer Gelation and Gel Combustion Synthesis Process

Cobalt-free Sr0.7Y0.3CuO2+δ As a Cathode for Intermediate-Temperature Solid Oxide Fuel Cell

Preparation and Performance of Tri-layer Composite Anode Supported Fuel Cell

Performance and Optimization of Ni/3 Mol% Y2O3-ZrO2 Anode Supported SOFC

Synthesis and electrochemical properties of (Pr-Nd)1-ySryMnO3-δ and (Pr1-xNdx)0.7Sr0.3MnO3-δ as cathode materials for IT-SOFC

Nanoengineering electrode for yttria-stabilized zirconia-based symmetrical solid oxide fuel cells to achieve superior output performance

Development of yttria-stabilized zirconia thin films via slurry spin coating for intermediate-to-low temperature solid oxide fuel cells

High Performance Solid Oxide Fuel Cells Based on Tri-Layer Yttria-Stabilized Zirconia by Low Temperature Sintering Process

High Performance Tubular Solid Oxide Fuel Cells With Bscf Cathode

Performance and Electrochemical Analysis of Solid Oxide Fuel Cells Based on LSCF‐YSZ Nano‐electrode

Fabrication and Properties of Anode-Supported Solid Oxide Fuel Cell

High-performance cathode-supported SOFCs prepared by a single-step co-firing process

Optimization of BaZr0.1Ce0.7Y0.2O 3-δ-based proton-conducting solid oxide fuel cells with a cobalt-free proton-blocking La0.7Sr0.3FeO 3-δ-Ce0.8Sm0.2O2-δ composite cathode

Efficient strategy to boost the electrochemical performance of yttrium stabilized zirconia electrolyte solid oxide fuel cell for low-temperature applications

Simple Solid Oxide Fuel Cells