Abstract:Probabilistic evaluation of the internal pressure capacity before excessive leakage is essential for ensuring preemptive response in case of a severe accident in a prestressed concrete containment vessel (PCCV) subjected to internal pressure in a nuclear power plant. Therefore, in this study, we conducted a fragility analysis to evaluate the probabilistic internal pressure capacity for damage states before excessive leakage. Three damage states were classified, and a finite element (FE) model was developed based on the experimental test results of a 1 : 4 scale PCCV under the overpressurization condition at Sandia National Laboratory. The three damage states were determined as the onset of inelastic behavior (DS1), onset of leakage (DS2), and excessive leakage (DS3). Fragility analysis was performed using a validated FE model to consider uncertainties in material properties and prestressing force. The Latin hypercube sampling method was used to perform uncertainty quantification, and normality tests verified that the samples exhibited normal distributions. The internal pressure capacity variability in DS1 and DS2 was higher than that in DS3. DS1 is the point at which the compressive deformation caused by the prestressing force was converted into tensile deformation because of the increase in the internal pressure, which resulted in tensile concrete cracking. Furthermore, DS2 is the state in which localized damage of the liner occurred and cracks in the concrete spread. Thus, the internal pressure capacity for DS1 and DS2 exhibited high variability because of the uncertainty of the prestressing force and material properties. Moreover, the median capabilities of DS1, DS2, and DS3 were ~1.85, 2.61, and 3.45 times the design pressure, respectively. Therefore, material and structural uncertainties in nuclear power plants should be appropriately considered, and a conservative assessment of the damage state before excessive leakage should be performed for preemptive response in the case of severe accidents.

Study on the Containment Performance of MOX Fuel Processing Glovebox in Earthquake -Loading and Leakage Tests for Window Panels-

Investigation on Behavior of Glazing System with Elastomeric Interlayers under Blast Effects

Review on Hydrogen-Induced Failure of Rubber O-Rings for High Pressure Hydrogen Storage Tanks

Mixed Oxide Fuel Fabrication Facility Design/Engineering Glovebox: Fire Protection Safety

Combustion Properties of Glove-Box Panel Resins Under Fire Accidents

Containment Integrity and Sealing Assessment for HTR-PM600 Fresh Fuel Transport Package Under Impact Loading

Nonlinear Time History Analysis of a Pre-Stressed Concrete Containment Vessel Model under Japan's March 11 Earthquake

Effect of Swelling Behavior of Rubber Rings on the Sealing Performance for 70MPA Hydrogen Pressure Reducing Valves

Effects of Gas Permeation on the Sealing Performance of PEMFC Stacks

Mechanical property and sealing performance analysis of the diaphragm compressor cylinder head for the hydrogen refueling station under the mutation impact load

Assessment of leak-tightness for nuclear reactor containment under overpressure conditions considering aging effects

Nuclear material container drop testing using finite element analysis with verification using digital Image correlation

A mechanism leakage model of metal-bipolar-plate PEMFC seal structures with stress relaxation effects

Structural Design and Sealing Performance Analysis of a Nanofluidic Self-Heating Unsealing Rubber Cylinder

Design and dynamic analysis of transport cask for SMR fresh fuel assembly

Dynamic response characteristics and structural optimization of isolation seal under the impact of gas explosion

Fracture Analysis of Rubber Sealing Material for High Pressure Hydrogen Vessel

Clogging Properties of HEPA Filter Induced by Loading of Soot from Burned Glove-Box Panel Materials

Enhanced Stochastic Approaches of 1 : 4 PCCV in Nuclear Power Plant: Uncertainty Quantification and Fragility Assessment

Simulation of Leakage Behavior on Bolted Flanged Connections in Elevated Temperature Service

A benchmark shaking table test on the seismic responses of an extra‐large LNG storage tank