Abstract:The main objective of the current study is to investigate the response of an internally pressurized nuclear power plant containment structure at pressure values higher than design pressure, and is focused on the response of prestressed concrete containment to ultimate global structural failure. The containment structure consists of a prestressed concrete cylindrical perimeter wall, with a prestressed concrete tori-spherical dome, prestressed concrete ring beam, and conventionally reinforced concrete base slab. The finite element program ANSYS is used to predict the non-liner behaviour of the containment structure. Different techniques available in ANSYS program to model steel reinforcements for reinforced concrete and prestressed concrete is estimated to define a more suitable approach to model prestressing system. The approach proposed here is capable of incorporating parameters such as variation in tendon layout and non-uniform prestress losses in comparison to those done by other researchers. It is concluded that the design criteria for the containment structure are fully satisfied. No through crack was observed at design pressure. The first through crack develops in the dome at a pressure of 2.1 times the design pressure. There is no damage to be expected to the reactor systems up to a pressure well above design pressure. It is observed that the containment structure subject of this study meets the design requirement of the current standards and behaves linearly in excess of 1.5 times the design pressure. The response of the internally pressurized containment structure including the major openings is investigated. It is concluded that presence of openings does not have a significant effect on the pressure capacity of the containment structure. The minor differences in the responses are at pressure values beyond the linear limit and are less than 5%. The response when openings are included are very similar to those without openings, except at the immediate neighboring of the equipment airlock opening. It is concluded that to predict the pressure response of containment structure, including the openings can be ignored. In case of need for a more exact response, only the equipment airlock can be included in the model

Assessment of leak-tightness for nuclear reactor containment under overpressure conditions considering aging effects

Enhanced Stochastic Approaches of 1 : 4 PCCV in Nuclear Power Plant: Uncertainty Quantification and Fragility Assessment

Characterization of long-term evolution of leakage rates of O-ring seals in nuclear power plant under high-temperature and high-pressure conditions

A simulation research on thermal-pressure coupling loading of a 1:3.2 containment model

Failure Behavior and Vulnerability of Containment Structures Subjected to Overpressure Loads Considering Different Failure Criteria

Non-Linear Analysis Of A Nuclear Containment Structure Under High Internal Pressure

Ultimate Pressure Bearing Capacity Analysis for the Prestressed Concrete Containment

Finite Element Reliability Analysis of Steel Containment Vessels with Corrosion Damage

Effect of Elevated Temperature and Internal Pressure due to Severe Accidents on the Internal Pressure Capacity of Prestressed Concrete Containment Vessel

Sensitivity of the neutron multiplication factor to water ingress into a spent fuel cask

Functional failure criterion based on biaxial tensile testing of steel liners and its application to fragility analysis of nuclear containment under overpressure conditions

Simulation Research on Containment Response under Severe Accident Condition

Simulation of the Airborne Radioactive Substance Distribution and Monitoring of Coolant Leakage in a Typical Nuclear Reactor Containment

Stochastic model updating for analysis of a nuclear containment vessel under internal pressure

A Study on the Performance of Prestressed Concrete Containment with Carbon Fiber-Reinforced Polymer Tendons under Internal Pressure

Ultimate Capacity and Influenced Factors Analysis of Nuclear RC Containment Subjected to Internal Pressure

Simulation of Fission Products Behavior in Severe Accidents for Advanced Passive Pwr

Leakage analysis of B shape ring self-energized seal in high pressure polythene polymerizer due to the aging of its nonmetallic ring

Thermal Aging Effect Of Cdss On The Integrity Of The Pwr Primary Pipe With Damage Tolerance Method

NONLINEAR FINITE ELEMENT ANALYSIS OF 1:10 CONTAINMENT MODEL STRUCTURE SUBJECTED TO INTERNAL PRESSURE

EXPERIMENTAL STUDY OF NUCLEAR POWER PLANT CONCRETE CONTAINMENT STRENGTHENED WITH EXTERNALLY WRAPPED CARBON FIBER REINFORCED POLYMER SHEETS