Abstract:Recent explosions and impact events have highlighted the exposure of civil structures, prompting the need for resilient new constructions and retrofitting of existing ones. Laminated glass panels, particularly in glazed facades, are increasingly used to enhance blast resistance. However, the understanding of glass fragments and their interaction with the interlayer is still incomplete. This paper investigates experimentally the quasi-static and dynamic responses of cured and uncured polymers for seven different materials—two different products of polyvinyl butyral (PVB), two ethylene vinyl acetate products (EVA), one product of thermoplastic polyurethane (TPU), and two SentryGlas products (SG)—that were tested between 21 and 32 °C (69.8 and 89.6 °F), which is the recommended room temperature. In these experiments, the responses of PVB, EVA, TPU, and SG were evaluated under a quasi-static strain rate of 0.033 s−1 and compared to the results under a relatively higher strain rate of 2 s−1. Moreover, the high strain rate loading of the materials was accomplished using a drop-weight testing appliance to evaluate the engineering stress–strain response under strain rates between 20 and 50 s−1. The results demonstrated that with strain rates of 20 s−1, PVB behaved like a material with viscoelastic characteristics, but at 45 s−1 strain rates, PVB became a non-elastic material. SG, on the other hand, offered both a high stiffness and a high level of transparency, making it a very good alternative to PVB in structural applications. In contrast, after the maximum stress point, the response to the failure of the seven materials differed significantly. The tests provided ample information for evaluating alternative approaches to modeling these different materials in blast events.

Investigation on Behavior of Glazing System with Elastomeric Interlayers under Blast Effects

Soft Impact Response of Laminated Glass Plates

Deformation and Damage Mechanisms of Laminated Glass Windows Subjected to High Velocity Soft Impact

Dynamic Structural Response of Laminated Glass Panels to Blast Loading

Mitigating Blast Hazards: Experimental Evaluation of Anti-Shatter Films and Catcher-Cable Systems on Conventional Windows

Experimental investigation on the blast resistance of framed PVB-laminated glass

Blast Wave Simulator for Laminated Glass Panels Experimental Evaluation

The Influence of Strain Rate Behavior on Laminated Glass Interlayer Types for Cured and Uncured Polymers

Properties and Dynamic Behavior of Glass Curtain Walls with Split Screw Spline Mullions

Enhanced Blast Response Simulation of LG Panels Using an Elasto-Damage Model with the Finite Element Method

Blast performance of point-supported laminated glass panes with non-rigid supports

Experimental study of the dynamic response of PVB laminated glass under vented explosion loads of methane–air mixtures

Dynamic damage assessment of float glass under blast loading

Investigation of Thermal Breakage and Heat Transfer in Single, Insulated and Laminated Glazing under Fire Conditions

Three-dimensional Numerical Simulation for Blast Response of Double Laminated Insulating Glass Curtain Wall

Seismic Behavior of a Fully Tempered Insulating Glass Curtain Wall System under Various Loading Protocols

The Equivalent Method for Arbitrary Pulses Loaded on the Elastic-Brittle Panel

Investigation of the Thermal Response and Breakage Mechanism of Point-Supported Glass Facade under Wind Load

Numerical Study on Fire Response of Glass Facades in Different Installation Forms

An Ordinary State-Based Peridynamic Modeling for Dynamic Fracture of Laminated Glass under Low-Velocity Impact

Experimental study on fire response of double glazed panels in curtain walls