Abstract:By solving the problem of very long test time on reliability qualification for Light-emitting Diode (LED) products, the accelerated degradation test with a thermal overstress at a proper range is regarded as a promising and effective approach. For a comprehensive survey of the application of step-stress accelerated degradation test (SSADT) in LEDs, the thermal, photometric, and colorimetric properties of two types of LED chip scale packages (CSPs), i.e., 4000 °K and 5000 °K samples each of which was driven by two different levels of currents (i.e., 120 mA and 350 mA, respectively), were investigated under an increasing temperature from 55 °C to 150 °C and a systemic study of driving current effect on the SSADT results were also reported in this paper. During SSADT, junction temperatures of the test samples have a positive relationship with their driving currents. However, the temperature-voltage curve, which represents the thermal resistance property of the test samples, does not show significant variance as long as the driving current is no more than the sample's rated current. But when the test sample is tested under an overdrive current, its temperature-voltage curve is observed as obviously shifted to the left when compared to that before SSADT. Similar overdrive current affected the degradation scenario is also found in the attenuation of Spectral Power Distributions (SPDs) of the test samples. As used in the reliability qualification, SSADT provides explicit scenes on color shift and correlated color temperature (CCT) depreciation of the test samples, but not on lumen maintenance depreciation. It is also proved that the varying rates of the color shift and CCT depreciation failures can be effectively accelerated with an increase of the driving current, for instance, from 120 mA to 350 mA. For these reasons, SSADT is considered as a suitable accelerated test method for qualifying these two failure modes of LED CSPs.

Lumen degradation modeling of white-light LEDs in step stress accelerated degradation test

Accelerated Life Test for High-Power White Led Based on Spectroradiometric Measurement

Photometric and Colorimetric Assessment of LED Chip Scale Packages by Using a Step-Stress Accelerated Degradation Test (SSADT) Method

Assessment of Lumen Degradation and Remaining Life of Light-Emitting Diodes Using Physics-Based Indicators and Particle Filter

A Gamma process-based degradation testing of silicone encapsulant used in LED packaging

Accelerated degradation tests of large area a-Si solar cells

Investigation of Step-Stress Accelerated Degradation Test Strategy for Ultraviolet Light Emitting Diodes

Luminance degradation test and life prediction of LED light at conventional stress using TPWRAM

Reliability Assessment of Light-Emitting Diode Packages with Both Luminous Flux Response Surface Model and Spectral Power Distribution Method

A Novel Multiple-Stress-based Predictive Model of LEDs for Rapid Lifetime Estimation

Reliability Evaluation of LED Lamp Beads Considering Multi-Stage Wiener Degradation Process Under Generalized Coupled Accelerated Stress

Extrapolated lifetime prediction of light-emitting diode lights based on equivalent average luminance and accelerated degradation tests

In-Situ Monitoring the Degradation of LEDs En Route the Visible Light Communication System

Modeling of the Rapid Lifetime Assessment System with Multiple Stresses for LED Devices Using Adaptive Genetic Algorithm

Planning of step-stress accelerated degradation test based on non-stationary gamma process with random effects

Climatically Accelerated Material Processes Determining the Long-Term Reliability of Light-Emitting Diodes

Multiple stresses optimization design of constant-stress accelerated degradation test based on Wiener process

A Weibull–lognormal-based life prediction model for LED light with four groups of ADTs

An Analytical And Machine Learning Model For Spd Estimation And Its Prediction For Lumen And Chromaticity Shift Based Led Lifetime Performance Analysis

Optimal design of constant‐stress accelerated degradation tests based on the Wiener process with manufacturing batches heterogeneity and individual differences

Design of an optimal plan for an accelerated degradation test: a case study