Abstract:By solving the problem of very long test time on reliability qualification for Light-emitting Diode (LED) products, the accelerated degradation test with a thermal overstress at a proper range is regarded as a promising and effective approach. For a comprehensive survey of the application of step-stress accelerated degradation test (SSADT) in LEDs, the thermal, photometric, and colorimetric properties of two types of LED chip scale packages (CSPs), i.e., 4000 °K and 5000 °K samples each of which was driven by two different levels of currents (i.e., 120 mA and 350 mA, respectively), were investigated under an increasing temperature from 55 °C to 150 °C and a systemic study of driving current effect on the SSADT results were also reported in this paper. During SSADT, junction temperatures of the test samples have a positive relationship with their driving currents. However, the temperature-voltage curve, which represents the thermal resistance property of the test samples, does not show significant variance as long as the driving current is no more than the sample's rated current. But when the test sample is tested under an overdrive current, its temperature-voltage curve is observed as obviously shifted to the left when compared to that before SSADT. Similar overdrive current affected the degradation scenario is also found in the attenuation of Spectral Power Distributions (SPDs) of the test samples. As used in the reliability qualification, SSADT provides explicit scenes on color shift and correlated color temperature (CCT) depreciation of the test samples, but not on lumen maintenance depreciation. It is also proved that the varying rates of the color shift and CCT depreciation failures can be effectively accelerated with an increase of the driving current, for instance, from 120 mA to 350 mA. For these reasons, SSADT is considered as a suitable accelerated test method for qualifying these two failure modes of LED CSPs.

In-Situ Monitoring the Degradation of LEDs En Route the Visible Light Communication System

Accelerated Life Test for High-Power White Led Based on Spectroradiometric Measurement

QoS Analysis and Signal Characteristics for Short-Range Visible-Light Communications

LED Based High-Speed Visible Light Communications

Assessment of Lumen Degradation and Remaining Life of Light-Emitting Diodes Using Physics-Based Indicators and Particle Filter

Effects of LED Lighting Degradation and Junction Temperature Variation on the Performance of Visible Light Communication

LED Degradation Monitoring Using a Multi-Channel Spectral Sensor

Remote Online Two-Step Stress Lifetime Acceleration Test System for Ultraviolet Light-Emitting Diodes

Key Technologies of Visible Light Communications with Multiple LEDs

Photometric and Colorimetric Assessment of LED Chip Scale Packages by Using a Step-Stress Accelerated Degradation Test (SSADT) Method

Model and Methodology to Characterize Phosphor-Based White LED Visible Light Communication Links

High-speed Micro-Leds for Visible Light Communication: Challenges and Progresses

Research of Key Enabling Technologies for High-Speed Visible-Light Communication

Energy Efficiency Optimization Method of WDM Visible Light Communication System for Indoor Broadcasting Networks

Degradation behavior of deep UV-LEDs studied by electro-optical methods and transmission electron microscopy

Lumen degradation modeling of white-light LEDs in step stress accelerated degradation test

Research and Design of LED Light Suppression Flicker Technology in Visible Light Communication Technology

Enabling Low-power Duplex Visible Light Communication

On-Line Monitoring of Photometric, Colorimetric, Electrical and Thermal Parameters During Led Accelerated Life Testing

SmartVLC: Co-Designing Smart Lighting and Communication for Visible Light Networks

Traffic light to vehicle visible light communication channel characterization.