Abstract:By solving the problem of very long test time on reliability qualification for Light-emitting Diode (LED) products, the accelerated degradation test with a thermal overstress at a proper range is regarded as a promising and effective approach. For a comprehensive survey of the application of step-stress accelerated degradation test (SSADT) in LEDs, the thermal, photometric, and colorimetric properties of two types of LED chip scale packages (CSPs), i.e., 4000 °K and 5000 °K samples each of which was driven by two different levels of currents (i.e., 120 mA and 350 mA, respectively), were investigated under an increasing temperature from 55 °C to 150 °C and a systemic study of driving current effect on the SSADT results were also reported in this paper. During SSADT, junction temperatures of the test samples have a positive relationship with their driving currents. However, the temperature-voltage curve, which represents the thermal resistance property of the test samples, does not show significant variance as long as the driving current is no more than the sample's rated current. But when the test sample is tested under an overdrive current, its temperature-voltage curve is observed as obviously shifted to the left when compared to that before SSADT. Similar overdrive current affected the degradation scenario is also found in the attenuation of Spectral Power Distributions (SPDs) of the test samples. As used in the reliability qualification, SSADT provides explicit scenes on color shift and correlated color temperature (CCT) depreciation of the test samples, but not on lumen maintenance depreciation. It is also proved that the varying rates of the color shift and CCT depreciation failures can be effectively accelerated with an increase of the driving current, for instance, from 120 mA to 350 mA. For these reasons, SSADT is considered as a suitable accelerated test method for qualifying these two failure modes of LED CSPs.

Remote Online Two-Step Stress Lifetime Acceleration Test System for Ultraviolet Light-Emitting Diodes

Accelerated Life Test for High-Power White Led Based on Spectroradiometric Measurement

Investigation of Step-Stress Accelerated Degradation Test Strategy for Ultraviolet Light Emitting Diodes

Accelerated degradation tests of large area a-Si solar cells

A Design for &Lt;italic>in-Situ</italic> Measurement of Optical Degradation of High Power Light-Emitting Diodes under Accelerated Life Test

Prognostics of Radiation Power Degradation Lifetime for Ultraviolet Light-Emitting Diodes Using Stochastic Data-Driven Models

On-Line Monitoring of Photometric, Colorimetric, Electrical and Thermal Parameters During Led Accelerated Life Testing

In-Situ Monitoring the Degradation of LEDs En Route the Visible Light Communication System

Giant Enhancement of External Quantum Efficiency in Near‐UV Organic Light‐Emitting Diodes Via Device Aging and Impedance Spectroscopy Analysis

Photometric and Colorimetric Assessment of LED Chip Scale Packages by Using a Step-Stress Accelerated Degradation Test (SSADT) Method

Note: an Online Testing Method for Lifetime Projection of High Power Light-Emitting Diode under Accelerated Reliability Test.

A Novel Multiple-Stress-based Predictive Model of LEDs for Rapid Lifetime Estimation

Degradation behavior of deep UV-LEDs studied by electro-optical methods and transmission electron microscopy

Climatically Accelerated Material Processes Determining the Long-Term Reliability of Light-Emitting Diodes

Reliability Evaluation of LED Lamp Beads Considering Multi-Stage Wiener Degradation Process Under Generalized Coupled Accelerated Stress

Quantification of UV Light-Induced Spectral Response Degradation of CMOS-Based Photodetectors

Assessment of Lumen Degradation and Remaining Life of Light-Emitting Diodes Using Physics-Based Indicators and Particle Filter

Study on Packaging Techology of Ultraviolet LED with High Efficiency and Reliability

Reliability assessment of LED luminaires based on step-stress accelerated degradation test

Online Testing Method And System For Led Reliability And Their Applications

Modeling of the Rapid Lifetime Assessment System with Multiple Stresses for LED Devices Using Adaptive Genetic Algorithm