Abstract:The current pandemic crisis caused by SARS-CoV-2 has also pushed researchers to work on LEDs, especially in the range of 220-240 nm, for the purpose of disinfecting the environment, but the efficiency of such deep UV-LEDs is highly demanding for mass adoption. Over the last two decades, several research groups have worked out that the optical power of GaN-based LEDs significantly decreases during operation, and with the passage of time, many mechanisms responsible for the degradation of such devices start playing their roles. Only a few attempts, to explore the reliability of these LEDs, have been presented so far which provide very little information on the output power degradation of these LEDs with the passage of time. Therefore, the aim of this review is to summarize the degradation factors of AlGaN-based near UV-LEDs emitting in the range of 200-350 nm by means of combined optical and electrical characterization so that work groups may have an idea of the issues raised to date and to achieve a wavelength range needed for disinfecting the environment from SARS-CoV-2. The performance of devices submitted to different stress conditions has been reviewed for the reliability of AlGaN-based UV-LEDs based on the work of different research groups so far, according to our knowledge. In particular, we review: (1) fabrication strategies to improve the efficiency of UV-LEDs; (2) the intensity of variation under constant current stress for different durations; (3) creation of the defects that cause the degradation of LED performance; (4) effect of degradation on C-V characteristics of such LEDs; (5) I-V behavior variation under stress; (6) different structural schemes to enhance the reliability of LEDs; (7) reliability of LEDs ranging from 220-240 nm; and (8) degradation measurement strategies. Finally, concluding remarks for future research to enhance the reliability of near UV-LEDs is presented. This draft presents a comprehensive review for industry and academic research on the physical properties of an AlGaN near UV-LEDs that are affected by aging to help LED manufacturers and end users to construct and utilize such LEDs effectively and provide the community a better life standard.

Prognostics of Radiation Power Degradation Lifetime for Ultraviolet Light-Emitting Diodes Using Stochastic Data-Driven Models

Accelerated Life Test for High-Power White Led Based on Spectroradiometric Measurement

Lifetime Prediction of Ultraviolet Light-Emitting Diodes Using a Long Short-Term Memory Recurrent Neural Network

Prediction of Operational Lifetime of Perovskite Light Emitting Diodes by Machine Learning

A Novel Multiple-Stress-based Predictive Model of LEDs for Rapid Lifetime Estimation

Remote Online Two-Step Stress Lifetime Acceleration Test System for Ultraviolet Light-Emitting Diodes

Investigation of Step-Stress Accelerated Degradation Test Strategy for Ultraviolet Light Emitting Diodes

A Gamma process-based degradation testing of silicone encapsulant used in LED packaging

Reliability Evaluation of LED Lamp Beads Considering Multi-Stage Wiener Degradation Process Under Generalized Coupled Accelerated Stress

Extrapolated lifetime prediction of light-emitting diode lights based on equivalent average luminance and accelerated degradation tests

Assessment of Lumen Degradation and Remaining Life of Light-Emitting Diodes Using Physics-Based Indicators and Particle Filter

A Weibull–lognormal-based life prediction model for LED light with four groups of ADTs

A Design for &Lt;italic>in-Situ</italic> Measurement of Optical Degradation of High Power Light-Emitting Diodes under Accelerated Life Test

Note: an Online Testing Method for Lifetime Projection of High Power Light-Emitting Diode under Accelerated Reliability Test.

Lumen degradation modeling of white-light LEDs in step stress accelerated degradation test

Reliability assessment of LED luminaires based on step-stress accelerated degradation test

Degradation behavior of deep UV-LEDs studied by electro-optical methods and transmission electron microscopy

Reliability Assessment of Light-Emitting Diode Packages with Both Luminous Flux Response Surface Model and Spectral Power Distribution Method

Reliability Analysis of AlGaN-Based Deep UV-LEDs

Luminance degradation test and life prediction of LED light at conventional stress using TPWRAM

Machine Learning and Digital Twin Driven Diagnostics and Prognostics of Light‐Emitting Diodes