Abstract:The development of light-emitting diode (LED) technology has resulted in widespread solid state lighting (SSL) use in consumer and industrial applications. Previous researchers have shown that LEDs from the same manufacturer and operating under same use-condition may have significantly different degradation behavior. Applications of LEDs to safety critical and harsh environment applications necessitate the characterization of failure mechanisms and modes. This paper focuses on a prognostic health management (PHM) method based on the measurement of forward voltage and forward current of bare LED under harsh environment. In this paper, experiments have been done on single LEDs subjected to combined temperature–humidity environment of 85 °C, 85% relative humidity. Pulse width modulation (PWM) control method has been employed to drive the bare LED in order to reduce the heat effect caused by forward current and high frequency (300 Hz). A data acquisition system has been used to measure the peak forward voltage and forward current. Test to failure (luminous flux drops to 70%) data has been measured to study the effects of high temperature and humid environment loadings on the bare LEDs. A solid state cooling method with a Peltier cooler has been used to control the temperature of the LED in the integrating sphere when taking the measurement of luminous flux. The shift of forward voltage forward current curve and lumen degradation has been recorded to help build the failure model and predict the remaining useful life (RUL). Particle filter has been employed to assess the RUL of the bare LED. Model predictions of RUL have been correlated with experimental data. Results show that prediction of RUL of LEDs, made by the particle filter model, works with acceptable error-bounds. The presented method can be employed to predict the failure of LED caused by thermal and humid stresses.

Machine Learning and Digital Twin Driven Diagnostics and Prognostics of Light‐Emitting Diodes

Prediction of Operational Lifetime of Perovskite Light Emitting Diodes by Machine Learning

A novel fault diagnosis strategy for LED lamps via light output time-frequency characteristics analysis and machine learning

Physics‐based and data‐driven approaches for lifetime estimation under variable conditions: Application to organic light‐emitting diodes

Assessment of Lumen Degradation and Remaining Life of Light-Emitting Diodes Using Physics-Based Indicators and Particle Filter

An Analytical And Machine Learning Model For Spd Estimation And Its Prediction For Lumen And Chromaticity Shift Based Led Lifetime Performance Analysis

A Novel Multiple-Stress-based Predictive Model of LEDs for Rapid Lifetime Estimation

Note: an Online Testing Method for Lifetime Projection of High Power Light-Emitting Diode under Accelerated Reliability Test.

Human-centric lighting asset management for LED bulbs: a context-driven approach on prognostics and maintenance strategy development in public libraries

Prognostics of Radiation Power Degradation Lifetime for Ultraviolet Light-Emitting Diodes Using Stochastic Data-Driven Models

Research on the life prediction of light-emitting diode based on neural network

Machine Learning to Predict Junction Temperature Based on Optical Characteristics in Solid-State Lighting Devices: A Test on WLEDs

Advanced Detection of Failed LEDs in a Short Circuit for Automotive Lighting Applications

A Research on the Reliability of Light-Emitting Diode Based on Analyzing of Chip Image

A Machine Learning-based Framework for Predictive Maintenance of Semiconductor Laser for Optical Communication

Machine Learning Assisted Stability Analysis of Blue Quantum Dot Light-Emitting Diodes

Efficient Micro-LED defect detection based on microscopic vision and deep learning

On-Line Monitoring of Photometric, Colorimetric, Electrical and Thermal Parameters During Led Accelerated Life Testing

Machine learning assisted optical diagnostics on a cylindrical atmospheric pressure surface dielectric barrier discharge

Machine Learning and Deep Learning Algorithms for Bearing Fault Diagnostics -- A Comprehensive Review

Machine learning (ML) as a tool for phosphor design: A perspective