Abstract:Low levelized cost of electricity (LCOE) has been identified as critical for widespread adoption of photovoltaics (PV) without subsidies. Maintaining decades-long high-energy production is often an under-recognized opportunity in meeting cost goals because component lifetimes are not fully quantified at the time of manufacture. Whereas certain standardized tests minimize risk of early failure, there is little guidance to quantitatively predict degradation (or lack thereof) over decades, based on accelerated tests. In this article, we move toward bridging the understanding between indoor accelerated tests and outdoor performance data, with the goal of predicting energy yield with enough accuracy to inform financial decisions. Light- and elevated temperature-induced degradation (LETID) in p-type Si modules is analyzed in terms of impact on long-term module performance and thus LCOE. A method to predict the progression of LETID, using fixed kinetic constants and a numerical solution to the basic reaction rate equations, is detailed. Predictions are compared against both published data and that new to this study. These data include both indoor accelerated tests and fielded modules. We use the results in financial models to derive LCOE of modules in different climates with varying amounts of LETID, including uncertainty. Cost models based on the predictions indicate that LETID has a significant and climate-dependent impact on LCOE. We show that—even given the uncertainties identified in the study—these financial calculations can provide useful guidance to quantify risk based on accelerated test results. The analysis serves as an example of developing a predictive approach to PV reliability using physics of failure. In recent years, deployment of photovoltaics (i.e., solar panels, or "PVs") has grown at an astounding rate: Global electricity generation from PVs has increased by a factor of nearly 30 in the past 10 years. This rapid expansion has been driven by both remarkable cost decreases and societal demand for decarbonization. Product durability and consumer confidence are key elements of maintaining a robust industry and low costs. It is thus necessary to augment current empirical methods of assessing PV reliability with more predictive and quantitative assessments. This article applies basic findings of solar-cell defect physics in a way that can help industry stakeholders estimate the financial impacts of PV panel reliability. Light and elevated temperature-induced degradation is analyzed in terms of impact on long-term module performance and levelized cost of electricity. The predictions generated in this work are compared against experimental data, both from indoor accelerated tests and from fielded modules. The approach of comparing a physical model to indoor and outdoor data sets, setting limits on uncertainty, then translating energy yield predictions to financial impacts, is generally applicable to any PV degradation mechanism.

Accelerated degradation tests of large area a-Si solar cells

Accelerated Life Test for High-Power White Led Based on Spectroradiometric Measurement

Concentrated sunlight for accelerated stability testing of organic photovoltaic materials: Towards decoupling light intensity and temperature

Revealing Photodegradation Pathways of Organic Solar Cells by Spectrally Resolved Accelerated Lifetime Analysis

A Comparative Investigation on Outdoor and Laboratory Test of the Degradation Rates for Different Types of Photovoltaic Modules with Different Exposure Periods

Kinetics of light and elevated temperature-induced degradation in cast mono p-type silicon

Light-induced performance of SHJ solar modules under 2000 h illumination

Degradation Mechanisms Investigation for Long-Term Thermal Stability of Dye-Sensitized Solar Cells

From Femtoseconds to Gigaseconds: The SolDeg Platform for the Performance Degradation Analysis of Silicon Heterojunction Solar Cells

Temperature Accelerated Life Test and Failure Analysis on Upright Metamorphic Ga0.37In0.63P/Ga0.83In0.17As/Ge Triple Junction Solar Cells

In-Situ Measurement of Power Loss for Crystalline Silicon Modules Undergoing Thermal Cycling and Mechanical Loading Stress Testing

Investigation of degradation characteristics of electron irradiated GaInP/InGaAs/Ge solar cell by numerical simulation model

Analysis of the Degradation of Monocrystalline Silicon Photovoltaic Modules After Long-Term Exposure for 18 Years in a Hot–Humid Climate in China

Towards linking lab and field lifetimes of perovskite solar cells

Ion-migration analysis of degradation caused by outdoor exposure and accelerated stress testing in perovskite solar cells

Short wavelength photons destroying Si‐H bonds and its influence on high efficiency silicon solar cells and modules

Kinetics Study on Carrier Injection‐Induced Degradation and Regeneration at Elevated Temperature in P‐type Cast‐Monosilicon Passivated Emitter Rear Contact Solar Cells

A Gamma process-based degradation testing of silicone encapsulant used in LED packaging

Accelerated aging of all-inorganic, interface-stabilized perovskite solar cells

Extrapolated lifetime prediction of light-emitting diode lights based on equivalent average luminance and accelerated degradation tests

Long-term impact of light- and elevated temperature-induced degradation on photovoltaic arrays