Abstract:Metal halide perovskite solar cells (PSCs) have undergone rapid progress. However, unstable performance caused by sensitivity to environmental moisture and high temperature is a major impediment to commercialization of PSCs. In the present work, a low-temperature, glass-glass encapsulation technique using high performance polyisobutylene (PIB) as the moisture barrier is investigated on planar glass/FTO/TiO2/FAPbI3/PTAA/gold perovskite solar cells. PIB was applied as either an edge seal or blanket layer. Electrical connections to the encapsulated PSCs were provided by either the FTO or Au layers. Results of a "calcium test" demonstrated that a PIB edge-seal effectively prevents moisture ingress. A shelf life test was performed and the PIB-sealed PSC was stable for at least 200 days. Damp heat and thermal cycling tests, in compliance with IEC61215:2016, were used to evaluate different encapsulation methods. Current-voltage measurements were performed regularly under simulated AM1.5G sunlight to monitor changes in PCE. The best results we have achieved to date maintained the initial efficiency after 540 h of damp heat testing and 200 thermal cycles. To the best of the authors' knowledge, these are among the best damp heat and thermal cycle test results for perovskite solar cells published to date. Given the modest performance of the cells (8% averaged from forward and reverse scans) especially with the more challenging FAPbI3 perovskite material tested in this work, it is envisaged that better stability results can be further achieved when higher performance perovskite solar cells are encapsulated using the PIB packaging techniques developed in this work. We propose that heat rather than moisture was the main cause of our PSC degradation. Furthermore, we propose that preventing the escape of volatile decomposition products from the perovskite solar cell materials is the key for stability. PIB encapsulation is a very promising packaging solution for perovskite solar cells, given its demonstrated effectiveness, ease of application, low application temperature, and low cost.

Accelerated aging of all-inorganic, interface-stabilized perovskite solar cells

Towards linking lab and field lifetimes of perovskite solar cells

Comprehensive Understanding of Heat-Induced Degradation of Triple-Cation Mixed Halide Perovskite for a Robust Solar Cell

Thermal Stability of Encapsulated Carbon-Based Multiporous-Layered-Electrode Perovskite Solar Cells Extended to Over 5000 h at 85 °C

Stability-enhanced perovskite heterointerfaces and solar cells via strongly anchored and sterically hindered ligands

Impeded Degradation of Perovskite Solar Cells Via the Dual Interfacial Modification of Siloxane

Encapsulation protocol for flexible perovskite solar cells enabling stability in accelerated aging tests

Accelerated Thermal Aging Effects on Carbon‐Based Perovskite Solar Cells: A Joint Experimental and Theoretical Analysis

Prolonged Lifetime of Perovskite Solar Cells Using a Moisture-Blocked and Temperature-Controlled Encapsulation System Comprising a Phase Change Material as a Cooling Agent

Boosting Perovskite Solar Cells Efficiency and Stability: Interfacial Passivation of Crosslinked Fullerene Eliminates the "burn‐in" Decay

Internal Encapsulation Enables Efficient and Stable Perovskite Solar Cells

Resist Thermal Shock Through Viscoelastic Interface Encapsulation in Perovskite Solar Cells

Encapsulation of perovskite solar cells for enhanced stability: Structures, materials and characterization

Rapid Degradation Behavior of Encapsulated Perovskite Solar Cells under Light, Bias Voltage or Heat Fields

Interfacial stabilization for inverted perovskite solar cells with long-term stability

Microencapsulated Perovskite Crystals via In‐Situ Permeation Growth from Polymer Microencapsulation‐Expansion‐Contraction Strategy: Advancing A Record Long‐Term Stability Beyond 10,000 Hours for Perovskite Solar Cells

Hybrid Inorganic Electron-Transporting Layer Coupled with a Halogen-Resistant Electrode in CsPbI2Br-Based Perovskite Solar Cells to Achieve Robust Long-Term Stability.

Intermediate Phase Modification Enables High‐Performance Iodine‐Rich Inorganic Perovskite Solar Cells with 3000‐Hour Stability

Highly Efficient and Stable Perovskite Solar Cells via Modification of Energy Levels at the Perovskite/Carbon Electrode Interface

Immobilizing surface halide in perovskite solar cells via calix[4]pyrrole

Accelerated Lifetime Testing of Organic-Inorganic Perovskite Solar Cells Encapsulated by Polyisobutylene