Abstract:Metal halide perovskite solar cells (PSCs) have undergone rapid progress. However, unstable performance caused by sensitivity to environmental moisture and high temperature is a major impediment to commercialization of PSCs. In the present work, a low-temperature, glass-glass encapsulation technique using high performance polyisobutylene (PIB) as the moisture barrier is investigated on planar glass/FTO/TiO2/FAPbI3/PTAA/gold perovskite solar cells. PIB was applied as either an edge seal or blanket layer. Electrical connections to the encapsulated PSCs were provided by either the FTO or Au layers. Results of a "calcium test" demonstrated that a PIB edge-seal effectively prevents moisture ingress. A shelf life test was performed and the PIB-sealed PSC was stable for at least 200 days. Damp heat and thermal cycling tests, in compliance with IEC61215:2016, were used to evaluate different encapsulation methods. Current-voltage measurements were performed regularly under simulated AM1.5G sunlight to monitor changes in PCE. The best results we have achieved to date maintained the initial efficiency after 540 h of damp heat testing and 200 thermal cycles. To the best of the authors' knowledge, these are among the best damp heat and thermal cycle test results for perovskite solar cells published to date. Given the modest performance of the cells (8% averaged from forward and reverse scans) especially with the more challenging FAPbI3 perovskite material tested in this work, it is envisaged that better stability results can be further achieved when higher performance perovskite solar cells are encapsulated using the PIB packaging techniques developed in this work. We propose that heat rather than moisture was the main cause of our PSC degradation. Furthermore, we propose that preventing the escape of volatile decomposition products from the perovskite solar cell materials is the key for stability. PIB encapsulation is a very promising packaging solution for perovskite solar cells, given its demonstrated effectiveness, ease of application, low application temperature, and low cost.

Encapsulation protocol for flexible perovskite solar cells enabling stability in accelerated aging tests

Encapsulation for long-term stability enhancement of perovskite solar cells

Accelerated Lifetime Testing of Organic-Inorganic Perovskite Solar Cells Encapsulated by Polyisobutylene

Encapsulation of perovskite solar cells for enhanced stability: Structures, materials and characterization

Accelerated aging of all-inorganic, interface-stabilized perovskite solar cells

Facile and scalable bilayer polymer encapsulation to achieve long-term stability of perovskite solar cells under harsh humidity conditions

Low-temperature strain-free encapsulation for perovskite solar cells and modules passing multifaceted accelerated ageing tests

Internal Encapsulation Enables Efficient and Stable Perovskite Solar Cells

Resist Thermal Shock Through Viscoelastic Interface Encapsulation in Perovskite Solar Cells

An Internal Encapsulating Layer for Efficient, Stable, Repairable and Low-lead-leakage Perovskite Solar Cells

Encapsulation of Printable Mesoscopic Perovskite Solar Cells Enables High Temperature and Long‐Term Outdoor Stability

Encapsulating perovskite solar cells for long-term stability and prevention of lead toxicity

Nondestructive Single‐Glass Vacuum Lamination Encapsulation for Perovskite Solar Cells with Long‐Term Stability

Prolonged Lifetime of Perovskite Solar Cells Using a Moisture-Blocked and Temperature-Controlled Encapsulation System Comprising a Phase Change Material as a Cooling Agent

Thermal Stability of Encapsulated Carbon-Based Multiporous-Layered-Electrode Perovskite Solar Cells Extended to Over 5000 h at 85 °C

Buried Interface Optimization for Flexible Perovskite Solar Cells with High Efficiency and Mechanical Stability

Innovative Materials for Lamination Encapsulation in Perovskite Solar Cells

Progress on the stability and encapsulation techniques of perovskite solar cells

Advances in Encapsulations for Perovskite Solar Cells: From Materials to Applications

Recent progress in encapsulation strategies to enhance the stability of organometal halide perovskite solar cells